Fast Intentions exhaust is here! (continued)

chrisbeltre

Got 560 installed today, jesus lord is awesome. Only thing is my right tip is touching on the right side. Any idea on how to correct that?

XwChriswX

Slide up under it and push the hanger bar through the rubber holder a bit. If it won't stay put, try throwing a ring clamp on the inside to hold it in place.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

sparky

I posted on this awhile back in this thread. The alignment is very sensitive to the x pipe being level and loosening and twisting the can connection to the resonator. Try to have someone help you with alignment as its hard to do alone. Mine were badly aligned at first but I managed to get them bang on so it can be done. As you adjust it make sure the last hanger rubber is not holding things up, no other clamps should be needed.
Good luck.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates