Akuma Motorports 370z Intake

Jordo!

Impressed you are making comparison runs with G3

But... I think the problem you having with Rev 1 (and maybe 2 as well) is location for the MAF sensors -- they look to be higher in the intake tract than OEM, which will create misreads, at least without tuning.

__________________
Enjoy it. Destroy it.

AkumaMS

Actually, the MAF placement is good. The MAFs are after the longest straight piece of piping. The reason I made the intakes in this orientation is so I could have a long straight. This maintains velocity around/thru the sensor. We do not have any tuning issues. No voltage spikes, no weird correction issues. The intakes are very easy to tune.

I like using the silicone in the bumper/filter area. It helps alleviate any vibration/noise issues. It also fits a bit nicer.

The intakes will require the bumper to be removed to install, however you will be able to remove/reinstall with only the top plastics removed. This allows us to eliminate all couplers in the engine bay. The final intakes will not have any welds...all mandrel bent.

As far as testing, I am in 100% agreement. I need to get a car in here with the Stillen intakes so I can do some testing between the two. I have one customer who is bringing the car, but he has extensive bolt-on's so I would like to get 1 or 2 other cars for a more thorough test group.

In fact, if someone is interested PM me. I can offer a good deal on parts, labor and tuning for the effort.... no charge labor/cost on the intakes/dyno time Plus you get to be the coolest kid around with our intakes.

John

__________________
John Shafer
Owner/Calibrator
Akuma Motorsports LLC
http://t1.gstatic.com/images?q=tbn:A...ncVpndgs-nSyng