R2C Intake Installed

Rwilliams8586 · 07-05-2012, 11:28 PM

Quote:

Originally Posted by JARblue

Ryan, I definitely had some hood issues after this post that were addressed. I PM'd you so hit me back and I can give you some over the phone advice. Or in person of you want. Same with anyone else.

So I went over to James' house for a second opinion on the clearance issue with the R2C intake and confirmed that this intake will NOT properly fit my 2012 nismo. The passenger side intake tube does provide enough angle to allow for enough clearance to shut the hood. Thanks James for providing your garage and a second opinion. I am not happy but feel better knowing its not just me.
I will be contacting tunerZ for refund.

Be very very careful when purchasing any aftermarket parts for the NISMO models. I attempted to have my ark exhaust installed today at a very reputable shop and not only did the outlets not match up, but the resonators are touching the underbody brace. I called ark and was told I need to add washers in between the brace, about a half inch, to provide clearance. Not happy about this type of resolution, don't feel disturbing the structural integrity of the car is a safe or smart option.

Tunerz_Store · 07-06-2012, 10:26 AM

Ryan,

I stand behind the products I sell and if there are issues they will be taken care of. I have already spoken to R2C and they have already processed a return shipping label, which you have in your mail box.

The ARK exhaust is another issue I'm sure that will get resolved.

As I have said before and will say again, any issues contact me directly anytime.

Just FYI for others that have NISMO cars, apparently there is a possibility there will be some that have issues, although this isn't the first r2c intake that I have sold to someone with a NISMO 370z and they had no issues. ARK has test fitted their exhaust on a NISMO 370z and assure me it fits.

MyKindaGuise · 07-06-2012, 10:39 AM

Quote:

Originally Posted by Rwilliams8586

Be very very careful when purchasing any aftermarket parts for the NISMO models. I attempted to have my ark exhaust installed today at a very reputable shop and not only did the outlets not match up, but the resonators are touching the underbody brace. I called ark and was told I need to add washers in between the brace, about a half inch, to provide clearance. Not happy about this type of resolution, don't feel disturbing the structural integrity of the car is a safe or smart option.

That "issue" is on every Z... Its not even a problem with the product if you got the grip 2. You really just need a better installer. I went to a shop who never even had a Z in and they knew exactly what to do. If you do not bolt it up in the correct order then you will have that issue dont be so quick to blame products. Do a little research and you find that there are how-to's for that exhaust.

Rwilliams8586 · 07-06-2012, 11:32 AM

Quote:

Originally Posted by Tunerz_Store

Ryan,

I stand behind the products I sell and if there are issues they will be taken care of. I have already spoken to R2C and they have already processed a return shipping label, which you have in your mail box.

The ARK exhaust is another issue I'm sure that will get resolved.

As I have said before and will say again, any issues contact me directly anytime.

Just FYI for others that have NISMO cars, apparently there is a possibility there will be some that have issues, although this isn't the first r2c intake that I have sold to someone with a NISMO 370z and they had no issues. ARK has test fitted their exhaust on a NISMO 370z and assure me it fits.

Michael - Thanks for promptly responding and addressing the issue. I honestly thought it was just me overlooking something on the intake that is why I got a second opinion. I don't mean to come across as a bother, just having some bad luck i suppose.

Thanks again Michael for standing behind your products - I would recommend others to purchase thru you.

JARblue · 07-08-2012, 01:26 AM

Quote:

Originally Posted by Rwilliams8586

So I went over to James' house for a second opinion on the clearance issue with the R2C intake and confirmed that this intake will NOT properly fit my 2012 nismo. The passenger side intake tube does provide enough angle to allow for enough clearance to shut the hood. Thanks James for providing your garage and a second opinion. I am not happy but feel better knowing its not just me.
I will be contacting tunerZ for refund.

Disappointing for sure, man. There was definitely an issue with the passenger side intake fitting the throttle body flush. Also, for whatever reason, a hose connected to the wiper fluid reservoir seemed to interfere much more so on Ryan's Nismo than mine. This prevented even a less than flush fit at the throttle body from angling low enough for proper hood latching.

I'm sure Michael will get you sorted, whatever route you need to go. Glad you finally got the exhaust situated. Can't wait to hear it.

Effen5 · 07-10-2012, 01:26 PM

Michael,

Thank you for shipping out my intake so quickly (Northbrook IL).

Was this pretty simple to set up for a noobie like me to do tonight?

Can I just follow the Stillen DIY?

Tunerz_Store · 07-10-2012, 02:13 PM

No problem...

there are instructions in the box. 1hr install for noobs...
the g37 instructions are very similar

g37 install

Effen5 · 07-10-2012, 11:08 PM

Installed, sounds fantastic.

JARblue · 07-12-2012, 12:53 AM

Quote:

Originally Posted by Effen5

Installed, sounds fantastic.

Awesome, man!!

Enjoy!!

07-06-2012, 10:26 AM	#17 (permalink)
Tunerz_Store A True Z Fanatic Join Date: Aug 2010 Location: Louisville, KY Posts: 8,274 Drives: 04 G35 - 2016 Z06 Rep Power: 30	Ryan, I stand behind the products I sell and if there are issues they will be taken care of. I have already spoken to R2C and they have already processed a return shipping label, which you have in your mail box. The ARK exhaust is another issue I'm sure that will get resolved. As I have said before and will say again, any issues contact me directly anytime. Just FYI for others that have NISMO cars, apparently there is a possibility there will be some that have issues, although this isn't the first r2c intake that I have sold to someone with a NISMO 370z and they had no issues. ARK has test fitted their exhaust on a NISMO 370z and assure me it fits. __________________ Tunerz Store \| Uncover Your Vehicle's Potential 370z Intakes \| 370z Exhausts \| 370z Suspension \| 370z Brakes Tel: (844)8TUNERZ Last edited by Tunerz_Store; 07-06-2012 at 10:29 AM.

07-10-2012, 02:13 PM	#22 (permalink)
Tunerz_Store A True Z Fanatic Join Date: Aug 2010 Location: Louisville, KY Posts: 8,274 Drives: 04 G35 - 2016 Z06 Rep Power: 30	No problem... there are instructions in the box. 1hr install for noobs... the g37 instructions are very similar g37 install __________________ Tunerz Store \| Uncover Your Vehicle's Potential 370z Intakes \| 370z Exhausts \| 370z Suspension \| 370z Brakes Tel: (844)8TUNERZ Last edited by Tunerz_Store; 07-10-2012 at 02:20 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Stillen G3 intake!! Never Installed Brand New!!	Slammed370	Parts for sale (Private Classifieds)	12	04-11-2012 03:35 PM
Just installed K&N Typhoon intake...problem...	JrumMusic	Intake/Exhaust	18	04-08-2012 09:07 PM
Takeda Intake Installed!	kdo2milger	Intake/Exhaust	200	06-03-2011 07:11 AM
Top Secret Titanium Intake with CF - Installed!	Baker	Intake/Exhaust	29	06-29-2010 03:01 AM
R2C Intake Installed	jpit	Intake/Exhaust	14	09-05-2009 09:36 AM

07-10-2012, 01:26 PM	#21 (permalink)
Effen5 Base Member Join Date: Apr 2012 Location: Chicago Posts: 43 Drives: 2009 Nissan 370z m6 Rep Power: 13	Michael, Thank you for shipping out my intake so quickly (Northbrook IL). Was this pretty simple to set up for a noobie like me to do tonight? Can I just follow the Stillen DIY?

07-10-2012, 11:08 PM	#23 (permalink)
Effen5 Base Member Join Date: Apr 2012 Location: Chicago Posts: 43 Drives: 2009 Nissan 370z m6 Rep Power: 13	Installed, sounds fantastic.