Stillen exhaust piping diameter ?

smartbomb · 05-14-2009, 12:19 AM

Quote:

Originally Posted by Josh@STILLEN

Awesome.. So I'm sure in your tenure with Nissan and being an Nissan enthusiast you would be familiar with Steve Millen, his enormous success with Nissan with the IMSA Sports Car Series, and STILLEN's longstanding devotion to creating quality products, especially for the Z cars, where countless hours of R&D have been allocated to create, dyno test and tune (both for horsepower and sound) products such as exhaust systems designed to provide maximum power at a competitive price.

We always appreciate editorial on our products, and are always open to discuss our process (within reason, some things must remain in R&D to not hand the keys to the castle away.. ), a simple phone call could have assisted in some background information on the exhaust design.

Making assumptions on the design elements and their reason for function, without doing extensive development testing to back the statements up, borderline as irresponsible as the general consumer can interpret that statement as fact, such as what you've seen happen in this very post, due to the story you've written and the liberties you've taken.

That's also fueled by the inconsistency in every other dyno being run by numerous forum members, including the results from the owner of the other 370Z tested at that same facility, on the same dyno.

So in regards to the specific caption from your article.. "The Stillen 370Z exhaust goes from 2.5 inches in diameter to 2.25 inches and back again in several places along the flow path. If it were 2.5 inches all the way through, it would make more power" is incorrect and irresponsible, the exhaust was designed as is for a reason, and a good one, horsepower and tone.

My statements are based on making an assumption in saying you have not designed a specific exhaust system for the 370Z and have not tested the effects of tubing sizes and their effect on power and sound.. if I'm incorrect on that point I apologize.

I have been a friend and supporter of Stillen for many years and have used high quality Stillen parts in many evaluations I have written for many magazines over the years. Stillen has always helped me in providing support for my editorial and racing endevors.

However, I call them as I see them. I always have, otherwise an article would seem like a catalog discription for Stillen and not a neutral observation. Although the Stillen exhaust is a good high quality piece which I stated in my editorial, in my opinion it can be improved upon. All designs including every single thing I have designed can be improved upon. Stating all of somethings attributes, good and not as good gives more crediabitly to a part than if it was an all sunny review heaping praises like a piece of ad copy.

As for reasons in dyno testing inconsistancy. Technosqaures superflow dyno has a correction programmed into it where it trys to mimic the output of a more liberal dynojet which is useful when trying to compare the output to what others are getting with the more common dynojet. Killerbees report uses these corrected numbers.

However I prefer to state and publish the actual much lower output of the superflow. I want to be conservative as my reputation is on the line as a reporter. When looking at a more stingy dyno, you have to look at the delta from part to part, same car, same dyno, not the numbers compared to different cars and different dynos.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Exhaust, headers, and CAI	midgetcricket	Engine & Drivetrain	8	10-18-2010 08:49 AM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
Can Wheel Diameter Be Reprogrammed?	ChrisSlicks	Nissan 370Z General Discussions	6	04-29-2009 02:50 PM
Stillen Exhaust	DinoJ	Nissan 370Z General Discussions	2	04-27-2009 03:47 PM
Exhaust Piping Size?	JonnyH	Intake/Exhaust	7	01-14-2009 01:57 PM