AEM Cold Air intake

Methodical4u · 09-15-2011, 05:28 AM

did you disconnect the negative battery terminal for a few minutes? I'd start there and drive around for a while and see if that does anything.

XwChriswX · 09-15-2011, 09:17 AM

Have you tried operating the window washer system... Possibly the flid drained back into the tank so when the pump is trying to draw fluid, it's taking longer to get there, so it thinks it's low/out.

Xeler8 · 09-15-2011, 12:40 PM

its completely full. I disconnected the battery when I installed everything. but I guess I could try it. anymore ideas?

XwChriswX · 09-15-2011, 12:56 PM

The fluid sensor might have gotten shorted during the install, or jarred the wrong way, or a plug wasn't put back... Have you tried retracing your steps through the install to make sure everything was reconnected properly?

Methodical4u · 09-15-2011, 08:53 PM

Quote:

Originally Posted by XwChriswX

The fluid sensor might have gotten shorted during the install, or jarred the wrong way, or a plug wasn't put back... Have you tried retracing your steps through the install to make sure everything was reconnected properly?

I suddenly got a flashback of all the CRAP I had to deal with installing some of the stuff I did on my Evo when you posted this... lol man the car was fun but am I glad that it's gone.

XwChriswX · 09-15-2011, 09:58 PM

Quote:

Originally Posted by Methodical4u

I suddenly got a flashback of all the CRAP I had to deal with installing some of the stuff I did on my Evo when you posted this... lol man the car was fun but am I glad that it's gone.

09-15-2011, 09:17 AM	#2 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	Have you tried operating the window washer system... Possibly the flid drained back into the tank so when the pump is trying to draw fluid, it's taking longer to get there, so it thinks it's low/out. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

09-15-2011, 12:56 PM	#4 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	The fluid sensor might have gotten shorted during the install, or jarred the wrong way, or a plug wasn't put back... Have you tried retracing your steps through the install to make sure everything was reconnected properly? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k&n cold air intake	Nismoracer	Nismo 370Z	15	08-01-2016 05:53 PM
Cold air intake	doodleson	Nissan 370Z General Discussions	45	03-11-2013 03:06 PM
New Cold Air Intake - On Its Way!	joshs09slvrZ	Intake/Exhaust	4	07-06-2011 06:22 PM
Cold Air Intake?	wolver98	Nismo 370Z	24	09-13-2010 02:39 PM

09-15-2011, 05:28 AM	#1 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 17	did you disconnect the negative battery terminal for a few minutes? I'd start there and drive around for a while and see if that does anything.

09-15-2011, 12:40 PM	#3 (permalink)
Xeler8 Base Member Join Date: Jun 2011 Location: Austin, TX Age: 39 Posts: 3 Drives: 11 Nissan 370z Nismo Rep Power: 15	its completely full. I disconnected the battery when I installed everything. but I guess I could try it. anymore ideas?