Will Injen for Nismo fit 40th?

MattP725 · 06-11-2011, 09:05 PM

Wondering if there is any difference in fitment on the Injen intake for Nismo. I have seen some for sale for a good price and I can't imagine why they wouldn't fit on a standard 370z. Any idea?

MattP725 · 06-14-2011, 09:10 PM

No one knows the answer to this huh?

b1adesofcha0s · 06-14-2011, 09:22 PM

There might be, but I'm not too sure. I know that the Stillen G3 intakes don't normally fit the Nismo, but special steps have to be taken to make them fit (either that or they have a separate Nismo version, I'm not sure). Check the injen website. If they offer a separate version for the Nismo, then it won't fit. If not you should be ok. You can also just contact them and ask.

MattP725 · 06-14-2011, 10:06 PM

Yeah they are separate part nums... I'll call them tomorrow, I just don't want to hear a canned response from some CS rep.

b1adesofcha0s · 06-14-2011, 10:08 PM

Yeah that would probably be best. Most likely though it won't fit. If there wasn't a difference then they wouldn't really make 2 separate ones. At least it doesn't make any sense in my mind.

Nismo221 · 06-14-2011, 10:10 PM

I know that Stillens Gen 3 will fit a Nismo even though they say that they will not. I know this because I have them installed on my car. Trim one plastic bracket and move the horn.

MattP725 · 06-14-2011, 11:25 PM

I'm thinking it could fit but I'll call and ask anyhow.

06-11-2011, 09:05 PM	#1 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Will Injen for Nismo fit 40th? Wondering if there is any difference in fitment on the Injen intake for Nismo. I have seen some for sale for a good price and I can't imagine why they wouldn't fit on a standard 370z. Any idea?

06-14-2011, 09:22 PM	#3 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	There might be, but I'm not too sure. I know that the Stillen G3 intakes don't normally fit the Nismo, but special steps have to be taken to make them fit (either that or they have a separate Nismo version, I'm not sure). Check the injen website. If they offer a separate version for the Nismo, then it won't fit. If not you should be ok. You can also just contact them and ask. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

06-14-2011, 10:08 PM	#5 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Yeah that would probably be best. Most likely though it won't fit. If there wasn't a difference then they wouldn't really make 2 separate ones. At least it doesn't make any sense in my mind. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

06-14-2011, 10:10 PM	#6 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 35 Posts: 489 Drives: 2010 370z Nismo Rep Power: 14	I know that Stillens Gen 3 will fit a Nismo even though they say that they will not. I know this because I have them installed on my car. Trim one plastic bracket and move the horn. __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thoughts ?? Injen SP Series Dual Cold Air Intake - 09+ Nissan 370z Nismo	Nismo_370z	Nismo 370Z	38	08-21-2013 05:58 AM
Nismo Wheels on my 40th.	karotZ	40th Anniversary 370Z	44	06-13-2013 05:02 AM
Injen Nismo intake on regular 370z?	NYBladeZ	Intake/Exhaust	1	05-10-2011 01:45 AM
Nismo or 40th #160	Ole Rusty	Nissan 370Z General Discussions	17	05-31-2010 08:40 PM
Stillen, Injen, Nismo ppl, Give me a ride!!	tbonesteak	Southern California Region	7	05-25-2010 07:06 PM

06-14-2011, 09:10 PM	#2 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	No one knows the answer to this huh?

06-14-2011, 10:06 PM	#4 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Yeah they are separate part nums... I'll call them tomorrow, I just don't want to hear a canned response from some CS rep.

06-14-2011, 11:25 PM	#7 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	I'm thinking it could fit but I'll call and ask anyhow.