My ongoing Invidia Gemini exhaust review

370Z JT · 06-19-2013, 01:15 PM

Tips are adjustable.

Bullit79 · 06-19-2013, 02:50 PM

Quote:

Originally Posted by 370Z JT

Tips are adjustable.

Sweet, thanks for the reply! I was almost sold on the FI exhaust, but this looks like a good alternative for a relatively quiet exhaust with a near stock look.

yz10andy · 04-11-2017, 10:54 AM

Quote:

Originally Posted by 370Z JT

Tips are adjustable.

Can they tuck in as close to stock though? Just about the only thing holding me back from buying it.

filip00 · 04-22-2022, 08:18 AM

Very old thread but I'll post an update since I see the last question hasn't been answered.
The tips can almost be in the same position as stock, for a deeper positioning within the bumper you should install some shims in order to grab the pipe, as the intended installation is for the tips to protrude outwards. I also wanted as stock look as possible and I settled with having the tips protrude around 8mm or so, which is acceptable imho.

06-19-2013, 01:15 PM	#1 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 380	Tips are adjustable. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia Gemini CBE & ERZ HFC Review (with db comparison)	bluestyle55	Intake/Exhaust	113	10-16-2012 03:20 PM
Invidia Gemini Review	Red__Zed	Intake/Exhaust	13	09-29-2011 11:49 AM
Top Speed Exhaust (Resonator) vs. Invidia Gemini	TBSS2008	Intake/Exhaust	9	04-17-2011 09:12 PM
FS: Invidia Gemini Exhaust	I Run L.A.	Parts for sale (Private Classifieds)	23	03-13-2011 03:57 PM

04-22-2022, 08:18 AM	#4 (permalink)
filip00 Track Member Join Date: May 2021 Location: slovenia Posts: 601 Drives: 370z pack Rep Power: 125429	Very old thread but I'll post an update since I see the last question hasn't been answered. The tips can almost be in the same position as stock, for a deeper positioning within the bumper you should install some shims in order to grab the pipe, as the intended installation is for the tips to protrude outwards. I also wanted as stock look as possible and I settled with having the tips protrude around 8mm or so, which is acceptable imho.