PRM Jet Stream looking for testers: Canada

tiller · 02-25-2011, 04:31 PM

ill try it,whats the deal?iam in sault ste marie ontario

Da.Menace · 02-25-2011, 05:00 PM

Too far for me or else i'd go!

Paskii · 02-25-2011, 05:09 PM

Quote:

Originally Posted by Sibze

Hamilton area

Cool. Schomberg, Ontario may be a bit far for you I guess, I'm up in Markham still going to take me 1 hour to get there.
It is far but definitely welcome other guinea pigs to join me

Quote:

Originally Posted by tiller

ill try it,whats the deal?iam in sault ste marie ontario

Not sure what the deal is, I'll keep everyone posted if there are new updates

deolee · 02-25-2011, 05:14 PM

Interesting design~looks like a SRI. If they can make it longer, then it will have more performance gain. I'll give it a shot~hope BC is not too far for them! Just something sounds hot with my matte white Z

tiller · 02-25-2011, 05:33 PM

ahhhh cant drive there tho,Z's sleeping in my garage till winters over,its cold around here

Jordo! · 02-25-2011, 05:47 PM

Interested to see results. Was the 350Z price listed for a single intake or dual?

Paskii · 02-25-2011, 06:23 PM

I'm sure they ship stuff across North America, if not deolee I'll pick one up for you and ship it.

I actually don't know much about this intake, I was going to get the R2C intake but I'm going to see what this offers before I buy it now. Read some reviews for other vehicles, the gains are impressive.

deolee · 02-26-2011, 02:08 PM

Quote:

Originally Posted by Paskii

I'm sure they ship stuff across North America, if not deolee I'll pick one up for you and ship it.

I actually don't know much about this intake, I was going to get the R2C intake but I'm going to see what this offers before I buy it now. Read some reviews for other vehicles, the gains are impressive.

I'm just worried about the heat will soak the intake due to the length of the intake. Oh well~I can always test it right? We need more info. on it, like piping diameter and what brand is the filter element.

Jordo! · 02-26-2011, 02:12 PM

Quote:

Originally Posted by deolee

I'm just worried about the heat will soak the intake due to the length of the intake. Oh well~I can always test it right? We need more info. on it, like piping diameter and what brand is the filter element.

Actually, they could develop a boot for the end of it that would plug right into the OEM bumper inset just like the factory airbox.

If they do that, you've got a (theoretically) improved design than maintains OEM cool air ducting with potentially improved flow characteristics, and zero chance of hydrolock.

Given that the filter isn't exposed, it would have excellent heat shielding too by virtue of its design.

Whoever tests, see if you can get them to do that.

Z eliminator · 02-27-2011, 06:18 AM

I should give them a call as i can compare it to the stillen G3.
I have all the dyno's on my car.
Can sombody post there phone #.

Paskii · 02-27-2011, 08:42 AM

Hi everyone,

I gave PRM Racing a call yesterday and confirmed that he is looking for a tester, it's really at the early stages of prototyping. He also mentioned that he was looking for a stock to test with, he will build prototypes and need to do multiple dyno's to see which prototype produce the best gains.

I offered to be a test mule and to help him out for the whole prototype process. Z eliminator for more of their product & contact information check out their website Welcome to PRM Racing - Jet Stream Intake System

Jordo that's a good idea, I'll bring up your suggestion to see what he thinks. I'm no engineer so be cool if everyone can give some inputs.

Jordo! · 02-27-2011, 02:30 PM

Quote:

Originally Posted by Paskii

Jordo that's a good idea, I'll bring up your suggestion to see what he thinks. I'm no engineer so be cool if everyone can give some inputs.

Thanks

It shouldn't be too hard to fabricate something like that. They just need to make a mold of that badge shaped plastic piece from the front of the airbox, add a coupler to connect it to the end of their intake, done.

GZ3 · 02-27-2011, 05:32 PM

Quote:

Originally Posted by Jordo!

Thanks

It shouldn't be too hard to fabricate something like that. They just need to make a mold of that badge shaped plastic piece from the front of the airbox, add a coupler to connect it to the end of their intake, done.

thats a good idea, i was thinking of it long enough to where it would reach OEM part...

Jordo! · 02-27-2011, 07:42 PM

Quote:

Originally Posted by GZ3

thats a good idea, i was thinking of it long enough to where it would reach OEM part...

If they do it right, it should fit nice and snug just like OEM, and have access to cool air from the bumper.

Hell, combine a modshack fang vent with that, and you've got ram air.

Paskii · 03-02-2011, 05:47 PM

Hi everyone,
Just an update. I went up to PRM Racing and they did some measurements, currently they are working on a prototype. Their designs are more like SRI pointing toward the suction airbox. That's it for now.

02-25-2011, 05:00 PM	#17 (permalink)
Da.Menace Track Member Join Date: Apr 2010 Location: Canada Posts: 698 Drives: people crazy Rep Power: 16	Too far for me or else i'd go! __________________ Brembo :: H&R :: KW :: SPC :: Stillen

02-25-2011, 05:47 PM	#21 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	Interested to see results. Was the 350Z price listed for a single intake or dual? __________________ Enjoy it. Destroy it.

02-27-2011, 06:18 AM	#25 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	I should give them a call as i can compare it to the stillen G3. I have all the dyno's on my car. Can sombody post there phone #. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bully Dog Looking for Beta Testers	>135I	Tuning	6	11-11-2010 12:25 AM
O Canada	susu	Canada	29	07-04-2010 12:30 PM
hello from BC CANADA eh!	zed_sanyon	New Forum Member	5	03-09-2010 01:46 AM
Canada Day	nogoodname	Canada	17	07-03-2009 07:14 PM
Technosquare Inc is looking for ECU BETA testers...	Chebosto	Tuning	16	06-07-2009 12:57 AM

02-25-2011, 04:31 PM	#16 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 369 Drives: 09 370z touring Rep Power: 14	ill try it,whats the deal?iam in sault ste marie ontario

02-25-2011, 05:14 PM	#19 (permalink)
deolee Base Member Join Date: Apr 2010 Location: Vancouver,BC Posts: 39 Drives: 10 Z34 matte white Rep Power: 15	Interesting design~looks like a SRI. If they can make it longer, then it will have more performance gain. I'll give it a shot~hope BC is not too far for them! Just something sounds hot with my matte white Z

02-25-2011, 05:33 PM	#20 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 369 Drives: 09 370z touring Rep Power: 14	ahhhh cant drive there tho,Z's sleeping in my garage till winters over,its cold around here

02-25-2011, 06:23 PM	#22 (permalink)
Paskii Base Member Join Date: Apr 2010 Location: Toronto, CAN Posts: 198 Drives: 09 Nissan 370z A7 Rep Power: 15	I'm sure they ship stuff across North America, if not deolee I'll pick one up for you and ship it. I actually don't know much about this intake, I was going to get the R2C intake but I'm going to see what this offers before I buy it now. Read some reviews for other vehicles, the gains are impressive.

02-27-2011, 08:42 AM	#26 (permalink)
Paskii Base Member Join Date: Apr 2010 Location: Toronto, CAN Posts: 198 Drives: 09 Nissan 370z A7 Rep Power: 15	Hi everyone, I gave PRM Racing a call yesterday and confirmed that he is looking for a tester, it's really at the early stages of prototyping. He also mentioned that he was looking for a stock to test with, he will build prototypes and need to do multiple dyno's to see which prototype produce the best gains. I offered to be a test mule and to help him out for the whole prototype process. Z eliminator for more of their product & contact information check out their website Welcome to PRM Racing - Jet Stream Intake System Jordo that's a good idea, I'll bring up your suggestion to see what he thinks. I'm no engineer so be cool if everyone can give some inputs.

03-02-2011, 05:47 PM	#30 (permalink)
Paskii Base Member Join Date: Apr 2010 Location: Toronto, CAN Posts: 198 Drives: 09 Nissan 370z A7 Rep Power: 15	Hi everyone, Just an update. I went up to PRM Racing and they did some measurements, currently they are working on a prototype. Their designs are more like SRI pointing toward the suction airbox. That's it for now.