AAM Competition S-Line Short Tail Axle-Back Exhaust

GZ3 · 02-09-2011, 09:46 AM

can we get a dyno for these?

'10Anamoly · 02-09-2011, 10:07 AM

Yeah the dyno is long overdue I think. Need a baseline stock car and then with these pipes to see the differences, preferably on the same day/car/time before and after install. Should not be hard with such an easily installed part.

Kastley85891 · 02-09-2011, 10:12 AM

Anyone that bought these gone to the dyno...?

AAM prolly to busy with HP builds ;-) be nice though I agree

tonybui · 02-10-2011, 10:51 AM

Please have this muffler version by the spring or at most, summer. I'm interested !!

Jon@AAMComp · 02-10-2011, 11:40 AM

Quote:

Originally Posted by '10Anamoly

Yeah the dyno is long overdue I think. Need a baseline stock car and then with these pipes to see the differences, preferably on the same day/car/time before and after install. Should not be hard with such an easily installed part.

Very true. We dyno'ed our shop 370Z when we first designing the pipes, but I think at the time that car had HFCs, Intakes and a Cobb AP. I will have to check the run files on the dyno computer. The shop 370Z has it's engine out right now while we develop our Twin Turbo kit, so we can't use our car to dyno. Most of our Short Tails have been sold outside of our state, so we don't have any immediate local customers who we can put on the dyno. I really wish we did though. I could get before and after for you guys, as well as a dyno video. I think most of the Mid-Atlantic 370Z guys that I know already have exhaust on their car. But if anyone is interested, and you are local to D.C., MD or VA, hit me up!

Quote:

Originally Posted by tonybui

Please have this muffler version by the spring or at most, summer. I'm interested !!

We'll do our best. We've had a few people ask about offering a muffler option in addition to the regular version. I think I have your email to contact you, but send me a pm just in case.

Thanks,
Jon

4r3s · 02-10-2011, 12:02 PM

Jon - we've got a few new people in the mid-a group recently, might want to post a thread over there looking for a volunteer, Im sure theyd be happy to help. b1adesofcha0s and eastwest2300 come to mind, also I don't think Al has any performance mods yet either.

ps - so wheres my AAM CAI?!?!

Nikkolai · 03-20-2011, 08:40 PM

I am in if a muffler version will be produced. I read that the Megan Axle back are not compatible with factory exhaust system and HKS is a bit much for an axle back.

40thThree7D · 02-13-2011, 09:33 PM

Jon, I'd be willing to help you guys out (and I'm 5 mins from the shop)...as long as the tips are oval

Red__Zed · 03-20-2011, 09:16 PM

cool stuff

'10Anamoly · 03-21-2011, 06:40 PM

I unbolted the Nismo muffler to hear what it sounded like (basically a 2.5" full exhaust with high flow cats and an x-pipe and two resonators). Let's just say that's a drag strip only mod, SOOOO loud. Sounded pretty good, lots of hiss but very race-car sounding.

Dreezy562 · 03-21-2011, 06:57 PM

Anyone find dyno or bought then and have an opinion?? Ill getting a tanabe but these sound fun for the weekend, especially if I just weld it myself...

Big J · 03-21-2011, 08:45 PM

I ordered these today. I'll give my opinion this weekend hopefully.

Kastley85891 · 03-21-2011, 09:15 PM

Muffler delates are loud as **** lol

Big J · 03-21-2011, 09:37 PM

And that's what I'm going for

I also have test pipes, btu sorry i'm not taking those off to get a baseline dyno lol.

Jordo! · 03-21-2011, 10:30 PM

$400 for two flanged tailpipes, huh?

Okay...

02-09-2011, 09:46 AM	#1 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 22	can we get a dyno for these? __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

02-09-2011, 10:07 AM	#2 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Yeah the dyno is long overdue I think. Need a baseline stock car and then with these pipes to see the differences, preferably on the same day/car/time before and after install. Should not be hard with such an easily installed part. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

02-09-2011, 10:12 AM	#3 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Anyone that bought these gone to the dyno...? AAM prolly to busy with HP builds ;-) be nice though I agree __________________ Boosted V8 hunter 2850 lbs and 375WHP

03-21-2011, 06:40 PM	#10 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	I unbolted the Nismo muffler to hear what it sounded like (basically a 2.5" full exhaust with high flow cats and an x-pipe and two resonators). Let's just say that's a drag strip only mod, SOOOO loud. Sounded pretty good, lots of hiss but very race-car sounding. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

03-21-2011, 06:57 PM	#11 (permalink)
Dreezy562 Enthusiast Member Join Date: Oct 2010 Location: Long beach, ca Posts: 419 Drives: 40th Rep Power: 15	Anyone find dyno or bought then and have an opinion?? Ill getting a tanabe but these sound fun for the weekend, especially if I just weld it myself... DarylP likes this.

02-10-2011, 10:51 AM	#4 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 428	Please have this muffler version by the spring or at most, summer. I'm interested !!

02-10-2011, 12:02 PM	#6 (permalink)
4r3s A True Z Fanatic Join Date: Dec 2009 Location: MD Posts: 2,077 Drives: Touring 370z Rep Power: 25	Jon - we've got a few new people in the mid-a group recently, might want to post a thread over there looking for a volunteer, Im sure theyd be happy to help. b1adesofcha0s and eastwest2300 come to mind, also I don't think Al has any performance mods yet either. ps - so wheres my AAM CAI?!?!

03-20-2011, 08:40 PM	#7 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 16	I am in if a muffler version will be produced. I read that the Megan Axle back are not compatible with factory exhaust system and HKS is a bit much for an axle back.

02-13-2011, 09:33 PM	#8 (permalink)
40thThree7D Base Member Join Date: Nov 2010 Location: Rockville MD Posts: 53 Drives: 40th anniversary 370 Rep Power: 15	Jon, I'd be willing to help you guys out (and I'm 5 mins from the shop)...as long as the tips are oval

03-20-2011, 09:16 PM	#9 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 121	cool stuff

03-21-2011, 08:45 PM	#12 (permalink)
Big J Track Member Join Date: Jun 2010 Location: Memphis Posts: 905 Drives: 370z Rep Power: 17	I ordered these today. I'll give my opinion this weekend hopefully.

03-21-2011, 09:15 PM	#13 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Muffler delates are loud as **** lol __________________ Boosted V8 hunter 2850 lbs and 375WHP

03-21-2011, 09:37 PM	#14 (permalink)
Big J Track Member Join Date: Jun 2010 Location: Memphis Posts: 905 Drives: 370z Rep Power: 17	And that's what I'm going for I also have test pipes, btu sorry i'm not taking those off to get a baseline dyno lol.

03-21-2011, 10:30 PM	#15 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 419	$400 for two flanged tailpipes, huh? Okay... __________________ Enjoy it. Destroy it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
megan racing axle back exhaust	pokeyl	Intake/Exhaust	0	12-08-2010 10:29 AM
New AAM 3" R-Line exhaust	StealthZ	Intake/Exhaust	17	10-28-2010 06:15 PM
AAM Competition exhaust	Big J	Intake/Exhaust	14	07-14-2010 10:10 AM
Best Come Back Line Ever	joshj808	The Lounge (Off Topic)	9	07-29-2009 08:12 PM
AAM Competition 2.5" True Dual Exhaust	tooohip	Intake/Exhaust	55	07-01-2009 03:17 PM