AAM Competition S-Line Short Tail Axle-Back Exhaust

thezmonster

Looks like I took some snap shots few mintues ago in the garage !!!!! up for pics !!!

use the 14mm bolt to lose on the pass. side 2 bolts

lose on the driver side 2 bolts

Then get 12mm bolt to lose the exhaust hanger holders etc 3 bolts
pass. side

driver side 3 bolts

In order to lose the last exhaust hanger get somebody to hold the old muffler rear section and remove the muffler
Then replace the gaskets with brand new ones and
install the exhaust short tails
Tight up the both side exhaust hanger but make sure the exhaust goes in the pipe and tight up the 14 bolt and double check with everything in order to warm up the vehicle to run up to 10 mins and test drive it !!!


Driver Side View

Pass. Side View

Crappy phone pic


Video will be up tom. night

Thanks
Tim Mundy

__________________
ZMONSTER!