Invidia Gemini - Anyone else having issues?

Daishi

Im going to be putting on the new passenger side pipe that invidia sent me today, so far the drivers side flex joint has been fine and its the passenger side thats leaking.

__________________
Cobb Tuned | Injen Intakes | Fast Intentions Long Tube Headers | Fast Intentions TDX Catback 18" Resonators CF Mufflers | Tommy Kaira Hebi Bebi Shift Knob | 19x9.5/19x10.5 Five Axis Design S5:F w/ 245/40/19 - 285/35/19 Hankook Ventus V12's

jran76

Just saw this.... I had an issue with the weld on one of the flanges that connect to the cat; it was only welded half way around and had a massive leak. Not sure how they missed that, but they sent me a replacement pipe, and I have not had any issues in the 5000 miles since installing.

I also have a loose hanger that is rattling on one side. I am not sure if the Z exhaust is the same (I have a G37 sedan), but the hanger on the muffler is 2 pieces and the part that attaches to the car slides over the piece that attaches to the muffler. On one side there is a weld holding the 2 together, and the other side is missing the weld altogether. Again just looked like over-sight on their (QA?) part.

Overall, the welds and quality look good, but I think, at least in my case, it was a QA issue. As mentioned, you get what you pay for. In the end, Invidia took care of the major issue, and at some point I will get a quick weld on the hanger to address the other issue.

__________________
2009 G37S Sedan-6MT: Advan / Volk / Tein / SPC / Invidia / Cobb / K&N