Berk HFC's + Stillen CBE = RAAAAAAASSSSPPPPP

JB1

Yep, night and day difference between now and right after the install of the HFC's. The rasp definitively got a lot less over time. I had Berk HFC's + Berk CBE myself for a while and that was a little raspy as well. It also was waaay too loud for me, so I got rid of the HFC's and went back to stock cats but I kept the Berk CBE. Now there is no rasp, just a nice deep tone.

__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //

Push370zzz

Try the Stillen HFC's maybe? I have the Stillen CBE + HFC's and it sounds great, a little rasp when flooring it above 4k-ish until 5 or 6k and then it stops. I'm not sure but have heard the Berks tend to be a little louder and raspier.

__________________
Range Rover Sport Supercharged
Nissan 370z Touring + Sport

Lezydesign

I just paired up my Z which already has the invidia gemini rolled tip and the takeda CAI with the CNT HFC, and i got a LOT of rasp. I also got some really annoying rattle at 1900 rpm as well. Anyone has an idea if it is suppose to be like this?

atx370z

Ok, so i jacked the car up and started it to listen for leaks. I heard a scratchy noise almost like a channel on the tv is out and thought, "YES I FOUND THE LEAK"... but i didn't. I can almost guarantee whatever is making this noise is whats making the rasp, but nothing is leaking. It sounds like its coming from the 2 resonator looking things on the exhaust.

You can hear the noise plain as day here - YouTube - IMG 0752

Maybe Stillen can chime in and let me know what im hearing... or did i get a defective exhaust... =\

__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel,
4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM
Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's

evse82

I have the exact same setup with no rasp at all. I did have a whole bunch of rasp at the start but that ended up being gasket leak between the headers and the cats (the triangular ones). I put in the proper berk gaskets and the rasp was instantly gone.

Make sure there are no leaks there.

tinysumo

I have this exact setup Stillen CBE with Berk HFC's. I will say that this setup has rasp but only on a cold startup. You will get a little buzzing from the exhaust but nothing unbearable. It goes away rather tho quickly once the car warms up. Once the car is warm I think the exhaust sounds rather clean? I've been really happy witht his setup.

__________________
Injen CAI | Stillen CBE | Berk HFC | JIC Coilovers | Volk CE28n's | SPC camber arm

Marcus Ryan

Just got mine put on today and I'm getting a little buzzing myself. I'm going to put it up on the lift in the next week or so and I'll report back. Hopefully it's just a leak.

Marcus Ryan

After a bit of highway time, Its not a rattle, its coming from the back of the car and it sounds God damn awful. If it doesn't fade quick they're coming off.

Red370

never had a bit of rasp with mine from day one, must be an issue somewhere.

__________________
2011 Mustang 5.0 | 3.55's | Lethal Performance off road H-Pipe | Magnaflow Muffler Delete | JLT CAI/Bama tuned 417whp/ 404 ft/lbs

Marcus Ryan

While we're at it can we define what exactly is meant by "rasp?" Mine sounds much like a rattle, but its definitely coming out of the tail pipe. I get it pretty much anytime I put a load on the motor and its especially prominent on the highway. Is this what others are getting?

spearfish25

As JB1 stated above, the exhaust will settle down with time. He was there the day I had my HFCs installed (CBE was already on the car). We drove off for the first time and we both cringed...the rasp was ungodly. I'd say it took a good 2-3 weeks for things to really settle down. Essentially, you have to heat cycle the exhaust a number of times and the rasp will diminish greatly. Especially at the end of a track day when the exhaust is scorching hot, I think it sounds pretty wicked and almost no rasp.

__________________
2013 Cadillac V-Wagon, RIP Z

Marcus Ryan

I'll sit on it for a while but what still makes me a little tense is that I bought the hfc's used from a member here on the forums. That said, it may be chilling out a bit already but in any case I'm going to give it some time. I'll report back on the progress.

Holliday

I have one thought that came to mind from experience: I had a magnaflow muffler and it would do that crap at certain RPM's. It was a internal baffle that had came loose and would rattle. I am not to sure how the stillen exhaust is but I thought I would just throw that idea out there.

I know exactly how you feel from rasp. It drives me CRAZY! That is why I was so strict on the exhaust system I picked out. Good luck bro

__________________

tjlazer

sounds to me like a rattle from something loose. My Fi TDX does not make any rattle or sounds like that.

__________________
2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

atx370z

I emailed stillen and sent them a link to the video and nobody every got back to me. Not sure if i should make a big deal of it or just deal with it...

__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel,
4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM
Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's