Meistershaft GTS: quiet it down some?

Nikon FM · 08-07-2010, 11:36 AM

Okay….I can possibly help. I still have my stock catalytic converters sitting in my garage if you want them (one bolt needs to be drilled out and replaced….it broke), or we can swap resonator sections on the exhausts (my FI with 18" CF resonators for your "noise makers"), swapping would be initially as a sound check …..if we like the results then we could trade? Just a couple ideas that would address your situation. Good luck!

tjlazer · 08-07-2010, 11:47 AM

Quote:

Originally Posted by Nikon FM

Okay….I can possibly help. I still have my stock catalytic converters sitting in my garage if you want them (one bolt needs to be drilled out and replaced….it broke), or we can swap resonator sections on the exhausts (my FI with 18" CF resonators for your "noise makers"), swapping would be initially as a sound check …..if we like the results then we could trade? Just a couple ideas that would address your situation. Good luck!

Well I have been doing some research and I don't think we can do that. The setups are too different. See this pic here. My Y pipe is the same as stock. We would have to do a whole swap.

Nikon FM · 08-07-2010, 12:41 PM

Yeah good picture and it tells the story. I still have my OEM catalytic converters if you need/want them. There is a bolt (the evil one) that broke while removing the lug, that needs to be removed. Should not be too difficult with a machine shop at your disposal.

08-07-2010, 11:36 AM	#1 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 607	I can help Okay….I can possibly help. I still have my stock catalytic converters sitting in my garage if you want them (one bolt needs to be drilled out and replaced….it broke), or we can swap resonator sections on the exhausts (my FI with 18" CF resonators for your "noise makers"), swapping would be initially as a sound check …..if we like the results then we could trade? Just a couple ideas that would address your situation. Good luck! __________________ Buddy Revell: "One man's sooner is another man's later"

08-07-2010, 12:41 PM	#3 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 607	Yeah good picture and it tells the story. I still have my OEM catalytic converters if you need/want them. There is a bolt (the evil one) that broke while removing the lug, that needs to be removed. Should not be too difficult with a machine shop at your disposal. __________________ Buddy Revell: "One man's sooner is another man's later"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
This board is too quiet	Horseface	The Lounge (Off Topic)	14	06-20-2010 05:22 PM
Anyone find a set of quiet tires?	BrianMSmith	Wheels & Tires	9	01-16-2010 10:31 PM