Custom exhaust [Review]

Zsteve · 04-24-2010, 06:24 PM

As long as you know its not going to add gains and atleast you didnt gut it and ruin a piece of equipement, nothing wrong with this. Its a good mod for what its suppose to do, change the sound. Any fumes getting into the car at standstill?

semtex · 04-24-2010, 06:42 PM

It sounds good.

nuTinmuch · 04-24-2010, 07:12 PM

While it does sound good, it is sort of an... er... interesting mod.

semtex · 04-24-2010, 07:18 PM

Quote:

Originally Posted by nuTinmuch

While it does sound good, it is sort of an... er... interesting mod.

Yes, it's creative. Gotta give it that.

craniac24 · 04-24-2010, 07:22 PM

Do you get any rattling/buzzing/raspy noises?

nogoodname · 04-24-2010, 07:38 PM

Instead of spending 20 bucks on that mod you did. You could of achieved the same results for free.
Just borrow a drill and a 3/4 inch drill bit.

Drill & Paint:

frost · 04-24-2010, 07:45 PM

$30 and you can go back to stock sound in seconds.

Trips · 04-24-2010, 07:45 PM

Quote:

Originally Posted by nogoodname

Instead of spending 20 bucks on that mod you did. You could of achieved the same results for free.
Just borrow a drill and a 3/4 inch drill bit.

Drill & Paint:

Oh no you didn't!!

Trips · 04-24-2010, 07:46 PM

Quote:

Originally Posted by frost

$30 and you can go back to stock sound in seconds.

10$ over budget. sorry

phelan · 04-24-2010, 07:50 PM

Quote:

Originally Posted by nogoodname

Instead of spending 20 bucks on that mod you did. You could of achieved the same results for free.
Just borrow a drill and a 3/4 inch drill bit.

Drill & Paint:

ng...

craniac24 · 04-24-2010, 07:55 PM

Quote:

Originally Posted by frost

$30 and you can go back to stock sound in seconds.

I don't get it...what is that?

frost · 04-24-2010, 08:00 PM

Quote:

Originally Posted by craniac24

I don't get it...what is that?

It's a cutout. You put it into your exhaust piping, and run stock until you take the plate off the other side, then the exhaust flows freely out of there making for very loud noise and HP gains (in cars with enough air intake to not need the back pressure).

nogoodname · 04-24-2010, 08:00 PM

Quote:

Originally Posted by Triple's

Oh no you didn't!!

Quote:

Originally Posted by phelan

ng...

Yea, drilling holes in the exhaust wasn't a good idea. Welded some pipes here and there to solve this.

CBRich · 04-24-2010, 08:02 PM

I would rather spend $20 and add washers than drill a hole in my exhaust. Sounds good man.

frost · 04-24-2010, 08:03 PM

Quote:

Originally Posted by nogoodname

Yea, drilling holes in the exhaust wasn't a good idea. Welded some pipes here and there to solve this.

wtf dude

04-24-2010, 06:24 PM	#16 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 21	As long as you know its not going to add gains and atleast you didnt gut it and ruin a piece of equipement, nothing wrong with this. Its a good mod for what its suppose to do, change the sound. Any fumes getting into the car at standstill? __________________ 2010 LS3 C6 Silver coupe corvette

04-24-2010, 06:42 PM	#17 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	It sounds good. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

04-24-2010, 07:12 PM	#18 (permalink)
nuTinmuch A True Z Fanatic Join Date: Dec 2009 Location: New Jersey Posts: 1,092 Drives: PG 7AT 370Z Rep Power: 17	While it does sound good, it is sort of an... er... interesting mod. __________________ nuTinmuch! -- Platinum Graphite 370Z -- Check out my Gallery thread here!

04-24-2010, 07:22 PM	#20 (permalink)
craniac24 Enthusiast Member Join Date: Mar 2010 Location: Ronkonkoma, NY Posts: 339 Drives: 2010 PG Roadster Rep Power: 402	Do you get any rattling/buzzing/raspy noises? __________________ 2010 6MT PG Roadster w/Sport & NAV. Stillen Exhaust, Stillen GIII Intake, Eibach Springs, H&R Spacers 15f/20r, SPC Rear Camber Kit. Thanks to Vinny Ten Racing!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
custom exhaust?	black09Z	Engine & Drivetrain	7	11-10-2011 05:21 PM
FI Review - 12" Resonators and custom skid plates	speedworks	Intake/Exhaust	3	05-10-2011 08:37 AM
180 Custom Headlight Review!	bullitt5897	Exterior & Interior	43	12-10-2010 05:26 PM
New Custom HKS exhaust installed	370zTwinTurbo	Intake/Exhaust	20	03-22-2010 08:08 AM
so I went to a custom exhaust shop	jason805	Intake/Exhaust	5	11-10-2009 02:24 PM

04-24-2010, 07:38 PM	#21 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	Instead of spending 20 bucks on that mod you did. You could of achieved the same results for free. Just borrow a drill and a 3/4 inch drill bit. Drill & Paint:

04-24-2010, 08:02 PM	#29 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	I would rather spend $20 and add washers than drill a hole in my exhaust. Sounds good man.