Fast Intentions Long Tube Headers are here!

vipor · 01-01-2010, 11:02 AM

G37Sam · 01-01-2010, 06:10 PM

Any updates?

G37Sam · 01-01-2010, 07:57 PM

Saw this today Tony and remembered your thread haha

Saw it in the Dubai's Ferrari Store, those were used in their 3.0L V10 engines back in 2001 or so.. Had Schumacher's signature & certificate on it too haha if you guys saw the price on that thing you honestly wouldn't be complaining on the price of FI headers hahaha

semtex · 01-02-2010, 11:23 AM

Tony -- installation question for you. Does the engine need to be lifted out in order to install these? My mechanic said he seems to recall that when he installed my Stillen headers, the cats had to be out of the way in order for him to reach the bolts. With LTHs, that's obviously not an option. I mean, there are no cats, but the pipe extends through to where the cats would have been, and you can't just move them out of the way. Hence my question. I'm hoping my mechanic just remembers wrong. It's been about six months since he put my headers in, after all.

cotizi · 01-02-2010, 12:41 PM

Quote:

Originally Posted by semtex

Tony -- installation question for you. Does the engine need to be lifted out in order to install these? My mechanic said he seems to recall that when he installed my Stillen headers, the cats had to be out of the way in order for him to reach the bolts. With LTHs, that's obviously not an option. I mean, there are no cats, but the pipe extends through to where the cats would have been, and you can't just move them out of the way. Hence my question. I'm hoping my mechanic just remembers wrong. It's been about six months since he put my headers in, after all.

Interesting question. When I talked to Tony on the phone he mentioned installation was easy just time consuming and that I could do it myself if I wanted.

theDreamer · 01-02-2010, 12:47 PM

Quote:

Originally Posted by cotizi

Interesting question. When I talked to Tony on the phone he mentioned installation was easy just time consuming and that I could do it myself if I wanted.

That is what he said to me, also from a few people I have talked to it seems very few cars need extensive work to add headers just time.

kannibul · 01-02-2010, 01:21 PM

Quote:

Originally Posted by G37Sam

Saw this today Tony and remembered your thread haha

<image snip>

Saw it in the Dubai's Ferrari Store, those were used in their 3.0L V10 engines back in 2001 or so.. Had Schumacher's signature & certificate on it too haha if you guys saw the price on that thing you honestly wouldn't be complaining on the price of FI headers hahaha

How's that off a V10 - all the ports are on one side?

LateralG'z · 01-02-2010, 01:26 PM

When are these going to be available? I checked the website and there was nothing on them. is there a link to these on their page? thanks

theDreamer · 01-02-2010, 01:28 PM

Quote:

Originally Posted by LateralG'z

When are these going to be available? I checked the website and there was nothing on them. is there a link to these on their page? thanks

You can add your name to the list, but current ETA is very end of March or beginning of April. He is waiting on a piece of equipment which will allow him to bend the pipes as one single piece instead of having to weld them from a bunch of small pieces.

semtex · 01-02-2010, 03:55 PM

Quote:

Originally Posted by cotizi

Interesting question. When I talked to Tony on the phone he mentioned installation was easy just time consuming and that I could do it myself if I wanted.

Quote:

Originally Posted by theDreamer

That is what he said to me, also from a few people I have talked to it seems very few cars need extensive work to add headers just time.

Good to know. Thanks guys. Yeah I'm thinking my mechanic was just having a senior moment.

theDreamer · 01-02-2010, 03:57 PM

Quote:

Originally Posted by semtex

Good to know. Thanks guys. Yeah I'm thinking my mechanic was just having a senior moment.

You sure it was not you.

semtex · 01-02-2010, 04:00 PM

Quote:

Originally Posted by theDreamer

You sure it was not you.

HA! Yeah I'm sure. But believe me, I have my fair share of senior moments. They usually happen when my wife asks me if I remembered to do something she assigned to me.

theDreamer · 01-02-2010, 04:07 PM

Quote:

Originally Posted by semtex

HA! Yeah I'm sure. But believe me, I have my fair share of senior moments. They usually happen when my wife asks me if I remembered to do something she assigned to me.

G37Sam · 01-02-2010, 05:55 PM

Quote:

Originally Posted by kannibul

How's that off a V10 - all the ports are on one side?

There are two ports in each header pipe due to the 2 exhaust valves per cylinder I believe

1slow370 · 01-02-2010, 06:21 PM

i think it's been asked before but is there a stillen header exchange program for these? i haven't installed them yet... i have until spring ish to decide as i can't touch the car til then. i wan't to see the one piece beds first.love the turbulence cone those handmade or do u buy them from one of the companies that sells them for cheap?

01-01-2010, 11:02 AM	#466 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	__________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

01-01-2010, 06:10 PM	#467 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Any updates? __________________ '14 Viper GTS '08 RB'd G37S - Sold

01-01-2010, 07:57 PM	#468 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Saw this today Tony and remembered your thread haha Saw it in the Dubai's Ferrari Store, those were used in their 3.0L V10 engines back in 2001 or so.. Had Schumacher's signature & certificate on it too haha if you guys saw the price on that thing you honestly wouldn't be complaining on the price of FI headers hahaha __________________ '14 Viper GTS '08 RB'd G37S - Sold

01-02-2010, 11:23 AM	#469 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Tony -- installation question for you. Does the engine need to be lifted out in order to install these? My mechanic said he seems to recall that when he installed my Stillen headers, the cats had to be out of the way in order for him to reach the bolts. With LTHs, that's obviously not an option. I mean, there are no cats, but the pipe extends through to where the cats would have been, and you can't just move them out of the way. Hence my question. I'm hoping my mechanic just remembers wrong. It's been about six months since he put my headers in, after all. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 02:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 10:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-03-2009 11:57 PM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 09:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-17-2009 11:25 PM

01-02-2010, 01:26 PM	#473 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 16	When are these going to be available? I checked the website and there was nothing on them. is there a link to these on their page? thanks

01-02-2010, 06:21 PM	#480 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	i think it's been asked before but is there a stillen header exchange program for these? i haven't installed them yet... i have until spring ish to decide as i can't touch the car til then. i wan't to see the one piece beds first.love the turbulence cone those handmade or do u buy them from one of the companies that sells them for cheap?