face it dreamer you are broke and cannot afford it. ahahahahahahaha

I could, I just have extreme patience, also my friend who does most all my installs really really wants to do a header install on the Z as he primarily has only ever done Mustangs. He is curios how much easier or harder it will be.

No, nothing like that. To the east coast I am charging $70 for UPS ground.

I'm sure half of that is to cover the packing materials. I know I had to call in some archeologists to unwrap my CBE it was so mummified... :icon18:

I've posted my review: http://www.the370z.com/intake-exhaus...tml#post507498

I was talking about UPS-Red

he means overnight ups

Red = Next Day Air ~11am ($181.11)
Red Saver = Next Day Air ~3pm ($174.10)

Estimated with 30lbs and a 40x12x10" box with a $1000 value.

You save a little bit with Saver Dreamer :stirthepot:

totally worth it :stirthepot:

The UPS label on my box said 26 lbs if that helps.

Thanks :tup:

I figured with 21lb headers 30 was a safe bet. Just estimated the dimensions based off of pictures.

what about 2-day saturday delivery? :tup:

Bringing it down to 26lbs saved a lot actually

This is from FI to Allen (Comm to Res)

UPS Next Day Air®
10:30A.M., Friday
April 23, 2010 145.51 USD*

UPS Next Day Air Saver®
By End of Day, Friday
April 23, 2010 139.52 USD*

UPS 2nd Day Air®
By End of Day, Saturday
April 24, 2010 114.11 USD*

Well, I think we have enough on our plate now for Saturday guys, you all will just have to wait till the next weekend for me to get mine on the car.

compared to $70 which is I think what Tony said he charges for shipping, they aren't too bad

hey, we got friday night too!

:iagree:

Here is a question for all of the local Dallas people... What's the plan on passing TX inspection with the FI LTH installed? Will you have to rip these out and put HFC back on every year for the inspection?

I will just put the stock headers back on. no way in hell would I pass with the LTH

You should be fine as long as you dont throw a check engine light. I'm unaware of anywhere in texas where they do tailpipe emissions testing on newer vehicles, but i think its on a county by county basis. I plan to try with the LTH (and pick a good place to do it at), and if I ABSOLULTELY have to im keeping my stock cats and headers just in case.

edit: the car is going to noticebly smell like fuel regardless, so whoever is doing the inspection should prob not be an *******!

Yep, it is county by count, but Texas usually just does a OBD-II check (plug and check for codes) and then basic visual inspection (headlights, taillights, etc.).

Here they completely check the car.

measuring CO2 and checking the normal rate.

putting it on a lift and look around underneath it. which will end up them going lulwhut? at the LTH

Visual inspection here is suppose to require the car to be lifted, but many to most shops do not do it so the only time they look under a car is if they have room.

If I get failed I know at least 1 person in the 3 major counties I deal with that can pass my car :tup:

I have access to NJ inspection stickers so I dont have that problem *cough* lol

UPDATE-

Las night I got set #004 back from the coaters. WOW, they look amazing. I will post pictures of them today. They will also be in the mail today, along with Dreamers and Shumby from the G37 side: hopefully...

Thanks, Tony

Hellz yeah! Can't wait to see em!

What's the additional charge for the coating?

hey Tony-tone, can you update the list when you get a chance? I know your buzy but I wanna see my name getting closer :) take it easy buddy

What kinda coating is this Tony? The Stainless plating coating, or a thermal ceramic coating??

Thermal ceramic!

:drool: How much extra is that over the standard LTH's, or is that process included? What color do they come back in? The tannish one or a blackish one?

High gloss silver almost chrome looking. I will post pictures soon. The cost is an extra $345

Ooooooh... And did Semtex get this? If not that means we get to have Another wonderful F.I. Review thread to :drool: over and torture all those who haven't recieved their set yet :bowrofl:

Oh Tony you tease! Only giving a taste of something, not its full potential till the end. :tup:

Mine are standard. No ceramic coating because Tony told me I don't need it.

Let me know a tracking number when these get shipped Tony. I am so happy. Wife has already made an appointment to get these put on. she will get to drive it with them on before me. booooo

And yours looks and sounds awesome!


I'm guessing the coating is primarily for those looking to go SC and won't have exhaust manifolds made for the turbos?

http://i74.photobucket.com/albums/i2...ssyWhipped.jpg

:facepalm:

Where are you getting them done?

Coating
 

Tony can you coat #9 (zello370) thanks :ughdance:

Zat getti9ng the LTH installed at the dealer