Exhaust\Intake setup - needs some advise

AlWakRa · 08-04-2016, 03:24 PM

Quote:

Originally Posted by Chuck33079

Don't forget good rotors when you're thinking about brake cooling. Two piece rotors run much cooler.

Of course, just waiting for Z1 sprinkle slotted to be in stock again (their site shows out of stock). They look great and one of my friends recommended them over the slotted version, just to stay away from any drilled rotors.

and leave the troll alone

Chuck33079 · 08-04-2016, 03:30 PM

Quote:

Originally Posted by AlWakRa

just to stay away from any drilled rotors.

Yep, all the holes do is show you where the cracks will start.

Jhill · 08-04-2016, 05:35 PM

Quote:

Originally Posted by Chuck33079

Did you just use a picture of a V8 swapped Z with nitrous drifting to prove your point about turboed Zs on a track? Really?

Lol this must be one of the biggest fails ever. Yup ls swap proves a turbo can track.

madeinjapan · 08-05-2016, 07:12 AM

Quote:

Originally Posted by Jhill

Lol this must be one of the biggest fails ever. Yup ls swap proves a turbo can track.

abm89 · 08-05-2016, 04:30 PM

LOL this thread is awesome.

I guess to help the OP, I would go with what chuck said as far as making cooling a priority. I've never been to Qatar, but I imagine the heat is as bad, if not worse than Texas. An oil cooler is a must with any VQ37 in my opinion.

I'm running the stock radiator and haven't had any issues on track and dailying the car for nearly 90,000 miles. However, I'm running the Stillen bumper which has generous cooling.

To comment on the other hilarity in this thread, the reason most boosted Zs are not seen on track is because of the amount of supporting modifications needed to keep the car running healthy at extreme heat. High efficiency radiators, extra oil coolers, using E85, and modifying body panels are used to combat that issue. On top of that, running boost in a motor that is not designed for boost causes extra stress on the motor, so alot of guys will look into using a "built" motor to support the boost pressure. All of this can cost $$$$$, but if you build it right the first time, you will have less problems in the future.

At the end of the day it's your ride!

AlWakRa · 08-05-2016, 06:57 PM

Thanks abm for the inputs

Yup, I understand the importance of cooling, I have FI 34 row oil cooler, better brake\clutch fluid with SS lines, also will upgrade brakes with two piece rotors and may go to more aggressive pads, I researched its main issues on track at first

As I have upgraded exhaust and I am going to tune, I want to sort my setup and I think I already know what I will go with

madeinjapan · 08-08-2016, 08:29 AM

Quote:

Originally Posted by abm89

LOL this thread is awesome.

I guess to help the OP, I would go with what chuck said as far as making cooling a priority. I've never been to Qatar, but I imagine the heat is as bad, if not worse than Texas. An oil cooler is a must with any VQ37 in my opinion.

I'm running the stock radiator and haven't had any issues on track and dailying the car for nearly 90,000 miles. However, I'm running the Stillen bumper which has generous cooling.

To comment on the other hilarity in this thread, the reason most boosted cars are not seen on track is because of the amount of supporting modifications needed to keep the car running healthy at extreme heat. High efficiency radiators, extra oil coolers, using E85, and modifying body panels are used to combat that issue. On top of that, running boost in a motor that is not designed for boost causes extra stress on the motor, so alot of guys will look into using a "built" motor to support the boost pressure. All of this can cost $$$$$, but if you build it right the first time, you will have less problems in the future.

At the end of the day it's your ride!

fixed?

Chuck33079 · 08-08-2016, 08:33 AM

Quote:

Originally Posted by madeinjapan

fixed?

Not at all, dumbass. Factory FI cars are designed to accomodate the heat and stress, while aftermarket FI cars have to be reengineered to handle it. Now go suck off a shotgun. To completion.

madeinjapan · 08-08-2016, 09:34 AM

Quote:

Originally Posted by Chuck33079

Not at all, dumbass. Factory FI cars are designed to accomodate the heat and stress, while aftermarket FI cars have to be reengineered to handle it. Now go suck off a shotgun. To completion.

the reason most aftermarket boosted cars are not seen on track

Chuck33079 · 08-08-2016, 09:43 AM

Quote:

Originally Posted by madeinjapan

the reason most aftermarket boosted cars are not seen on track

Good job. It only took you half a dozen posts to come to that conclusion. You've come a long way. Keep it up, and soon you'll be allowed outside without wearing a helmet. Small steps, Corky.

Trips · 08-08-2016, 09:59 AM

Whats going on in here, and why am I getting reports in the tech?

maidinjapan

If you want to keep posting in this forum especially in the tech section?

Please post specific questions or elaborate on what specific answers your giving.

If you're not sure note that and STOP replying with incorrect info from either what you read or no experience

And leave such topics to people who actually know what they're talking about.

Im a NA guy so guess what?

I rarely comment in here as I know my knowledge is pretty weak in FI and I suggest you do the same from what I see of you're posting history is here.

Chuck

Please drop the attacks on maidinjapan as thats not acceptable either.

Let keep tech to just that and not make it personal.

Back on Topic!!

Chuck33079 · 08-08-2016, 10:24 AM

Quote:

Originally Posted by Trips

Whats going on in here, and why am I getting reports in the tech?

maidinjapan

If you want to keep posting in this forum especially in the tech section?

Please post specific questions or elaborate on what specific answers your giving.

If you're not sure note that and STOP replying with incorrect info from either what you read or no experience

And leave such topics to people who actually know what they're talking about.

Im a NA guy so guess what?

I rarely comment in here as I know my knowledge is pretty weak in FI and I suggest you do the same from what I see of you're posting history is here.

Chuck

Please drop the attacks on maidinjapan as thats not acceptable either.

Let keep tech to just that and not make it personal.

Back on Topic!!

I was going to argue with you on this, but your typo in his name got me laughing too hard.

AlWakRa · 08-08-2016, 10:56 AM

Wow, it was quite for two days, and again he is back

he couldn't resist coming back.

Boss, this is NA thread not FI, you can chime in if you have any additions to what been mentioned.

madeinjapan · 08-08-2016, 12:13 PM

Quote:

Originally Posted by AlWakRa

Wow, it was quite for two days, and again he is back

he couldn't resist coming back.

Boss, this is NA thread not FI, you can chime in if you have any additions to what been mentioned.

quite ?

and just so were clear

no track should ever see any kind of turbocharger ever correct ?

street is ok tho and drift is ok tho o and drag is ok tho right ?

Trips · 08-08-2016, 04:23 PM

Quote:

Originally Posted by Chuck33079

I was going to argue with you on this, but your typo in his name got me laughing too hard.

Nonetheless déjalo en paz

Quote:

Originally Posted by AlWakRa

Wow, it was quite for two days, and again he is back

he couldn't resist coming back.

Boss, this is NA thread not FI, you can chime in if you have any additions to what been mentioned.

Thanks I corrected myself didn't bother to look and assumed and so you know what happens when you assume.

08-05-2016, 04:30 PM	#35 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,307 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	LOL this thread is awesome. I guess to help the OP, I would go with what chuck said as far as making cooling a priority. I've never been to Qatar, but I imagine the heat is as bad, if not worse than Texas. An oil cooler is a must with any VQ37 in my opinion. I'm running the stock radiator and haven't had any issues on track and dailying the car for nearly 90,000 miles. However, I'm running the Stillen bumper which has generous cooling. To comment on the other hilarity in this thread, the reason most boosted Zs are not seen on track is because of the amount of supporting modifications needed to keep the car running healthy at extreme heat. High efficiency radiators, extra oil coolers, using E85, and modifying body panels are used to combat that issue. On top of that, running boost in a motor that is not designed for boost causes extra stress on the motor, so alot of guys will look into using a "built" motor to support the boost pressure. All of this can cost $$$$$, but if you build it right the first time, you will have less problems in the future. At the end of the day it's your ride! AlWakRa likes this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

08-05-2016, 06:57 PM	#36 (permalink)
AlWakRa Track Member Join Date: Oct 2010 Location: Qatar Posts: 600 Drives: 10 370Z PW 6MT Rep Power: 13449	Thanks abm for the inputs Yup, I understand the importance of cooling, I have FI 34 row oil cooler, better brake\clutch fluid with SS lines, also will upgrade brakes with two piece rotors and may go to more aggressive pads, I researched its main issues on track at first As I have upgraded exhaust and I am going to tune, I want to sort my setup and I think I already know what I will go with __________________ 2010 370Z Touring Sport Pearl White 6MT Powered by: Fast Intentions - Motordyne - Stillen - OS Giken - CJ Motorsports - Mishimoto - MCA Suspension - SPL - SuperPRO - RJM - Z1 Motorsport - Zspeed - Volk My Humble Journals

08-08-2016, 09:59 AM	#41 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Whats going on in here, and why am I getting reports in the tech? maidinjapan If you want to keep posting in this forum especially in the tech section? Please post specific questions or elaborate on what specific answers your giving. If you're not sure note that and STOP replying with incorrect info from either what you read or no experience And leave such topics to people who actually know what they're talking about. Im a NA guy so guess what? I rarely comment in here as I know my knowledge is pretty weak in FI and I suggest you do the same from what I see of you're posting history is here. Chuck Please drop the attacks on maidinjapan as thats not acceptable either. Let keep tech to just that and not make it personal. Back on Topic!! AlWakRa and Chuck33079 like this. __________________ Last edited by Trips; 08-08-2016 at 04:15 PM.

08-08-2016, 10:56 AM	#43 (permalink)
AlWakRa Track Member Join Date: Oct 2010 Location: Qatar Posts: 600 Drives: 10 370Z PW 6MT Rep Power: 13449	Wow, it was quite for two days, and again he is back he couldn't resist coming back. Boss, this is NA thread not FI, you can chime in if you have any additions to what been mentioned. __________________ 2010 370Z Touring Sport Pearl White 6MT Powered by: Fast Intentions - Motordyne - Stillen - OS Giken - CJ Motorsports - Mishimoto - MCA Suspension - SPL - SuperPRO - RJM - Z1 Motorsport - Zspeed - Volk My Humble Journals

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Custom VQ35HR Intake setup. (Motordyne M370)	Ivoidwarranty	Parts for sale (Private Classifieds)	5	06-10-2015 06:59 PM
TRUE OF FALSE Power Loss After Intake and Exhaust Setup	Bshields22	Engine & Drivetrain	21	12-19-2014 10:26 AM
[FOR SALE] Stock intake setup from a 2009 370Z	reechwuzhere	Parts for sale (Private Classifieds)	3	08-28-2011 10:39 AM
My wheel and tire setup - need expert advise.	DannyGT	Wheels & Tires	45	04-06-2011 11:08 PM