HKS HI-POWER exhaust installed and review

tru_Asiatik · 10-19-2009, 09:38 PM

i might need to come back saturday to adjust the exhaust since it was out of alignment after sway install(its hitting the crossmember again)

exhaust looks good btw

I Run L.A. · 10-19-2009, 11:37 PM

Quote:

Originally Posted by tru_Asiatik

i might need to come back saturday to adjust the exhaust since it was out of alignment after sway install(its hitting the crossmember again)

exhaust looks good btw

So is my exhaust.. I dont think it was installed correctly.. ill be there wed. hopefully im lucky enough to hear it in person...

ilive2win · 10-20-2009, 12:13 AM

Quote:

Originally Posted by I Run L.A.

So is my exhaust.. I dont think it was installed correctly.. ill be there wed. hopefully im lucky enough to hear it in person...

what time are you going to amplified on wed?

thanks AK! ill get that video up asap

LOU@AMPLIFIED · 10-20-2009, 01:40 AM

i can't seem to get the embeded video to post up here

here's the link

http://www.youtube.com/watch?v=aNUGhXvaESM

LOU@AMPLIFIED · 10-20-2009, 01:42 AM

I've already talked to HKS for you. You'll get a new mid pipe once they come in first week of November.

I Run L.A. · 10-20-2009, 02:51 PM

Im scheduled for 3 o'clock.. they are doing GTM resonated test pipes and adjusting the exhaust..

Quote:

Originally Posted by ilive2win

what time are you going to amplified on wed?

thanks AK! ill get that video up asap

ilive2win · 10-20-2009, 03:02 PM

Quote:

Originally Posted by I Run L.A.

Im scheduled for 3 o'clock.. they are doing GTM resonated test pipes and adjusting the exhaust..

i may not go up there tomorrow now cuz the new pipe from HKS is coming the first week of november so i figured i would go up there the first week of november and get the new piping from hks and the cats installed and the suspension adjusted

ilive2win · 10-20-2009, 06:27 PM

Quote:

Originally Posted by I Run L.A.

Im scheduled for 3 o'clock.. they are doing GTM resonated test pipes and adjusting the exhaust..

im def going down there, haha, see you tomorrow

posted one of the videos in the OP under the pix, thanks to SEMTEX's help

semtex · 10-20-2009, 01:02 PM

Embedded:

semtex · 10-20-2009, 01:04 PM

I wish there was more 'under-load' time in that video, like maybe some drive-bys, for example. But from what's there, it sounds pretty darn good! I can't wait to hear what it sounds like with HFCs!

ilive2win · 10-20-2009, 01:17 PM

the video wouldnt embed for me either, thanks semtex!

i cant wait to hear the exhaust with HFC's haha and intakes coming from K&N

Ryan@IP · 10-20-2009, 02:10 PM

Looks great! Sounds very nice from what we can hear as well!

semtex · 10-20-2009, 02:37 PM

You guys aren't doing any before/after dynos, are you? So we don't have a measurement on gains, right? (I'm not knockin' -- just asking.)

ilive2win · 10-20-2009, 02:42 PM

i have a stock dyno run from K&N because K&N is using my car for the R&D on there intakes. the car has to go back in november to get fitted and dynoed again to make sure the K&N intakes are perfect, so when i go back ill ask them to do a run with just the exhaust and without the intakes cuz im curious as well

JE001-MyZ · 10-20-2009, 05:27 PM

Looks good bro.... Can't wait to see the gains... post a video so I can hear how it sounds...still figuring out what exhaust I want to get....

10-19-2009, 09:38 PM	#1 (permalink)
tru_Asiatik Track Member Join Date: Feb 2009 Location: so cal Posts: 793 Drives: 2009 370Z 6MT Rep Power: 271	i might need to come back saturday to adjust the exhaust since it was out of alignment after sway install(its hitting the crossmember again) exhaust looks good btw __________________ Stillen G3 CAIStillen CBEBerk's HFCEibach ProkitHotchkis Swaysichiba 15/20mm spacers? Oil coolerStillen PulleyStillen Headers

10-20-2009, 01:02 PM	#9 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 33	Embedded: __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

10-20-2009, 01:04 PM	#10 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 33	I wish there was more 'under-load' time in that video, like maybe some drive-bys, for example. But from what's there, it sounds pretty darn good! I can't wait to hear what it sounds like with HFCs! __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

10-20-2009, 02:10 PM	#12 (permalink)
Ryan@IP Base Member Join Date: Dec 2008 Location: Lexington, KY Posts: 187 Drives: 04 BMW 330i ZHP Rep Power: 283	Looks great! Sounds very nice from what we can hear as well! __________________ Ryan at Injected Performance Phone: (888) 465-7373

10-20-2009, 02:37 PM	#13 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 33	You guys aren't doing any before/after dynos, are you? So we don't have a measurement on gains, right? (I'm not knockin' -- just asking.) __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

10-20-2009, 01:40 AM	#4 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	i can't seem to get the embeded video to post up here here's the link http://www.youtube.com/watch?v=aNUGhXvaESM

10-20-2009, 01:42 AM	#5 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	I've already talked to HKS for you. You'll get a new mid pipe once they come in first week of November.

10-20-2009, 01:17 PM	#11 (permalink)
ilive2win Track Member Join Date: Jul 2009 Location: san diego Posts: 872 Drives: 11WWX Rep Power: 18	the video wouldnt embed for me either, thanks semtex! i cant wait to hear the exhaust with HFC's haha and intakes coming from K&N

10-20-2009, 02:42 PM	#14 (permalink)
ilive2win Track Member Join Date: Jul 2009 Location: san diego Posts: 872 Drives: 11WWX Rep Power: 18	i have a stock dyno run from K&N because K&N is using my car for the R&D on there intakes. the car has to go back in november to get fitted and dynoed again to make sure the K&N intakes are perfect, so when i go back ill ask them to do a run with just the exhaust and without the intakes cuz im curious as well

10-20-2009, 05:27 PM	#15 (permalink)
JE001-MyZ Base Member Join Date: Jul 2009 Location: Oceanside, CA Posts: 28 Drives: 09 370Z Tourning M6 Rep Power: 17	Looks good bro.... Can't wait to see the gains... post a video so I can hear how it sounds...still figuring out what exhaust I want to get....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 12:15 PM
Installed my Stillen G3s. lots of pics and a short review	ssqpolo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	45	09-23-2009 03:20 PM
Nismo Sway Bars Installed.. Mini review..	Diversion	Brakes & Suspension	19	07-20-2009 10:45 AM
Any word on an HKS Hi Power exhaust for the 370?	Celinicus	Intake/Exhaust	4	05-13-2009 09:36 AM
HKS Hi Power exhaust???	sktvietdragon	Intake/Exhaust	1	03-16-2009 07:10 AM