sup everyone!!!!

afbunn · 09-24-2012, 05:05 PM

It was spongey at first, it would be limp halfway down then it would have tension and I could engage it, and it would only come up about 1/4 of the way on its own and I'd have to pick it up with my foot for it to spring back to rest. But eventually it just completely died out and is just sitting on the floor. I'm having it towed and worked on today. Mechanic says it sounds like the slave cylinder and if it is, the tranny won't need to be dropped so it should be a relatively quick and easy fix. Fingers crossed.

I've done some searching here on the site and this issue is not uncommon, not just for 370z but Maximas, Altys, Sentras even... anything Nissan that's manual seems to be prone to this issue.

JC671 · 09-24-2012, 08:15 PM

Quote:

Originally Posted by afbunn

I've done some searching here on the site and this issue is not uncommon, not just for 370z but Maximas, Altys, Sentras even... anything Nissan that's manual seems to be prone to this issue.

"Well if you weren't granny shifting and double clutch'n like you should" You wouldn't have had this promlem

simota1 · 09-24-2012, 09:01 PM

Quote:

Originally Posted by afbunn

It was spongey at first, it would be limp halfway down then it would have tension and I could engage it, and it would only come up about 1/4 of the way on its own and I'd have to pick it up with my foot for it to spring back to rest. But eventually it just completely died out and is just sitting on the floor. I'm having it towed and worked on today. Mechanic says it sounds like the slave cylinder and if it is, the tranny won't need to be dropped so it should be a relatively quick and easy fix. Fingers crossed.

I've done some searching here on the site and this issue is not uncommon, not just for 370z but Maximas, Altys, Sentras even... anything Nissan that's manual seems to be prone to this issue.

my slave cylinder did the same thing.... you know what fixed my problem? and this is no joke.... that helper spring... the guy from canada...i actually even have a SS clutch line to make the pressure higher... but after i installed the spring... the spongey dead pedal feel went away..... i still have the SS cable if you wanna give it a try, if it is the slave cylinder completely dead though i recommend a metal one.... it will take longer to get out here but it will never break on you EVER....

JC671 · 09-25-2012, 02:04 AM

There was a downed Black Cherry Z with Yigo plates right in the front of the 4-way intersection in YSengsong Rd and DMS area. Hazards were on and traffic was backed up because of it. No driver inside Was this anyone here?

Only person I can think of with a Black Cherry Z is Navyboy916.....

Navyboy916 · 09-25-2012, 02:29 AM

It wasn't me

simota1 · 10-13-2012, 03:31 AM

afbunn i think i saw you today

afbunn · 10-14-2012, 12:24 PM

You did! I saw you too, waved out my window like an idiot. Lol. I also saw Navyboy later that same night in traffic. Cool stuff. Can't believe I couldn't make it to the meet this morning AGAIN! I was out way late last night and didn't get home til 6am.

afbunn · 10-14-2012, 12:25 PM

Quote:

Originally Posted by JC671

There was a downed Black Cherry Z with Yigo plates right in the front of the 4-way intersection in YSengsong Rd and DMS area. Hazards were on and traffic was backed up because of it. No driver inside Was this anyone here?

Only person I can think of with a Black Cherry Z is Navyboy916.....

There's a girl I know who's a bartender at Porky's who also drives a black cherry. Could have been her. She's gorgeous.

simota1 · 10-14-2012, 04:35 PM

Quote:

Originally Posted by afbunn

You did! I saw you too, waved out my window like an idiot. Lol. I also saw Navyboy later that same night in traffic. Cool stuff. Can't believe I couldn't make it to the meet this morning AGAIN! I was out way late last night and didn't get home til 6am.

i waved at you to lol but i was kinda late....

btw bro i read on here that you wanna buy a z enclosure... im actually selling mine.. because i got these bars coming in so the enclosure wont fit anymore... i have one guy in line but if he doesnt pull through would you like to purchase it? i spent 130 for the box 120 for shipping it here waited like 2 months and spent 120 for re upholstering the box with cf look material... im selling it $180 no sub... lmk bro...

afbunn · 10-15-2012, 01:58 AM

Quote:

Originally Posted by simota1

i waved at you to lol but i was kinda late....

btw bro i read on here that you wanna buy a z enclosure... im actually selling mine.. because i got these bars coming in so the enclosure wont fit anymore... i have one guy in line but if he doesnt pull through would you like to purchase it? i spent 130 for the box 120 for shipping it here waited like 2 months and spent 120 for re upholstering the box with cf look material... im selling it $180 no sub... lmk bro...

Very interested. Is it a 10 or 12"? Upfire or rear fire?

simota1 · 10-15-2012, 02:50 AM

rear fire 12''

afbunn · 10-15-2012, 04:07 AM

Single or dual?

simota1 · 10-15-2012, 08:23 AM

Quote:

Originally Posted by afbunn

Single or dual?

single

afbunn · 10-15-2012, 09:42 AM

Definitely interested. What's the volume in cubic feet?

Navyboy916 · 10-15-2012, 04:44 PM

I just installed my jdm steering column control switch and the hood struts looks so good now.

09-25-2012, 02:04 AM	#349 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	Downed Z There was a downed Black Cherry Z with Yigo plates right in the front of the 4-way intersection in YSengsong Rd and DMS area. Hazards were on and traffic was backed up because of it. No driver inside Was this anyone here? Only person I can think of with a Black Cherry Z is Navyboy916..... __________________ A special "Thank You" to the Fast Intentions Crew! "Fueled By Passion"

10-13-2012, 03:31 AM	#351 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 404	afbunn i think i saw you today __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

10-15-2012, 02:50 AM	#356 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 404	rear fire 12'' __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

09-24-2012, 05:05 PM	#346 (permalink)
afbunn Base Member Join Date: Aug 2012 Location: North Ogden, Utah Posts: 116 Drives: 2009 370Z Sport M6 Rep Power: 12	It was spongey at first, it would be limp halfway down then it would have tension and I could engage it, and it would only come up about 1/4 of the way on its own and I'd have to pick it up with my foot for it to spring back to rest. But eventually it just completely died out and is just sitting on the floor. I'm having it towed and worked on today. Mechanic says it sounds like the slave cylinder and if it is, the tranny won't need to be dropped so it should be a relatively quick and easy fix. Fingers crossed. I've done some searching here on the site and this issue is not uncommon, not just for 370z but Maximas, Altys, Sentras even... anything Nissan that's manual seems to be prone to this issue.

09-25-2012, 02:29 AM	#350 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	It wasn't me

10-14-2012, 12:24 PM	#352 (permalink)
afbunn Base Member Join Date: Aug 2012 Location: North Ogden, Utah Posts: 116 Drives: 2009 370Z Sport M6 Rep Power: 12	You did! I saw you too, waved out my window like an idiot. Lol. I also saw Navyboy later that same night in traffic. Cool stuff. Can't believe I couldn't make it to the meet this morning AGAIN! I was out way late last night and didn't get home til 6am.

10-15-2012, 04:07 AM	#357 (permalink)
afbunn Base Member Join Date: Aug 2012 Location: North Ogden, Utah Posts: 116 Drives: 2009 370Z Sport M6 Rep Power: 12	Single or dual?

10-15-2012, 09:42 AM	#359 (permalink)
afbunn Base Member Join Date: Aug 2012 Location: North Ogden, Utah Posts: 116 Drives: 2009 370Z Sport M6 Rep Power: 12	Definitely interested. What's the volume in cubic feet?

10-15-2012, 04:44 PM	#360 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 13	I just installed my jdm steering column control switch and the hood struts looks so good now.