Boost Gauge Behaviour - Stillen SC

ANMVQ · 07-18-2014, 08:20 AM

Its hard to tell from that angle but are those pulleys even? Like I said I have mine walk but only on my cog set up, I dumped the cogs and stayed with the stock set up.

Pro4Jackster · 07-18-2014, 08:18 PM

Quote:

Originally Posted by ANMVQ

Its hard to tell from that angle but are those pulleys even? Like I said I have mine walk but only on my cog set up, I dumped the cogs and stayed with the stock set up.

They are not even. The 34T is a 20mm, and the 30T is a 35mm (if I remember correctly).

I had no problems with the cog setup pushing 13 psi. But you could see the bracket flex. I ran it that way for a few thousand miles and a few trips to the track.

07-18-2014, 08:20 AM	#1 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 21	Its hard to tell from that angle but are those pulleys even? Like I said I have mine walk but only on my cog set up, I dumped the cogs and stayed with the stock set up. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Boost Gauge recommendations?	shfeddy	Forced Induction	25	06-05-2014 09:36 AM
[FOR SALE] Defi Blue 30psi Boost and Innovate Blue Wideband Gauge	squib	Parts for sale (Private Classifieds)	6	01-13-2014 02:52 PM
[FOR SALE] Defi Red Racer Boost Gauge 52mm	GShock	Parts for sale (Private Classifieds)	4	09-08-2012 02:25 PM
Defi red racer boost gauge install	VQStryker	DIY Section (Do-It-Yourself)	0	04-20-2012 12:17 AM
[FOR SALE] Zeitronix ZR-2/ZT-2/LCD boost/wideband gauge setup	chicklet	Parts for sale (Private Classifieds)	2	06-04-2011 02:13 PM