Blown Motor, Engine Rebuild/Replacement.

DIGItonium · 04-14-2015, 03:01 PM

Quick Google search points to some stainless steel custom turbo headers. Maybe get some quotes? I don't know much, nor am I able to pursue anything let alone keeping it maintained.

COSMO · 04-14-2015, 03:06 PM

To be honest I would consider a bp kit over the FI mainly because of cost.. It would just be too hard to replicate the ones we have now with no guarantee it would work or anything..

COSMO · 04-14-2015, 03:10 PM

Not to mention the new z should be out next year and it is supposed to be forced induction so there's no telling what these guys are going to do who currently make turbo kits for our cars..

Plasmite · 04-15-2015, 05:57 PM

Upgrade, upgrade, upgrade

COSMO · 04-22-2015, 06:19 AM

I finally got my blackstone oil results since I switched to synthetic and the break-in is looking pretty good so far..

MidnightBlueZ · 04-22-2015, 08:14 AM

That's great news! I just sent mine off a couple days ago so I'll be interested to see what they show.

COSMO · 04-22-2015, 08:22 AM

Well just to let everyone know I have decided to ditch the gtm crap on my car and go with a custom precision 6466 single turbo kit.

6466 ball bearing
T4
.96 AR

Now these specs aren't set in stone so I may make some changes..

TopgunZ · 04-22-2015, 08:26 AM

.96? So this isn't a twin scroll? And can you get a "custom" kit for cheaper than the BP kit you aforementioned?

COSMO · 04-22-2015, 08:37 AM

It's funny you mention that because I actually sent sasha a pm a few months ago and Never got anything back.

Quote:

Originally Posted by TopgunZ

.96? So this isn't a twin scroll? And can you get a "custom" kit for cheaper than the BP kit you aforementioned?

COSMO · 04-22-2015, 08:47 AM

From what I have researched better performance with the undivided with big runners.

Quote:

Originally Posted by TopgunZ

.96? So this isn't a twin scroll? And can you get a "custom" kit for cheaper than the BP kit you aforementioned?

mikey1600 · 04-22-2015, 11:47 AM

Quote:

Originally Posted by COSMO

Well just to let everyone know I have decided to ditch the gtm crap on my car and go with a custom precision 6466 single turbo kit.

6466 ball bearing
T4
.96 AR

Now these specs aren't set in stone so I may make some changes..

I remember seeing somewhere a while ago Charles was going to make some new manifolds for his own kit to run some bigger turbo's, might have been on facebook or something. Have you asked him about that? Might be a better way for the $$? Would just be a shame to not use your existing kit cause of manifolds.

COSMO · 04-22-2015, 11:53 AM

Charles at cjm was actually my first choice but after texting him a few days it seems he's having issues with getting things together and has no idea as of yet to when his kit would be available... Trust me I'm ready to spread my wings here since I do have a built motor.. I know with that turbo that 850whp is reachable but to be honest I think I will keep things around 750whp that way I wont have to upgrade my 1000cc injectors.. As far as the spool up goes I'm not too concerned because no matter what tire you run it isn't possible to get traction anyway in the lower rpm's..

Quote:

Originally Posted by mikey1600

I remember seeing somewhere a while ago Charles was going to make some new manifolds for his own kit to run some bigger turbo's, might have been on facebook or something. Have you asked him about that? Might be a better way for the $$? Would just be a shame to not use your existing kit cause of manifolds.

mikey1600 · 04-22-2015, 12:28 PM

fair enough man, I understand the not wanting to wait part haha.

keep us updated! always thought about getting someone to build me a single turbo kit but don't really have anyone I'd trust around me who have tackled similar builds before, gl with it all!

hjo1078 · 04-22-2015, 01:16 PM

cosmo are you planning on running 93 octane or e85 ?

COSMO · 04-22-2015, 01:23 PM

I'm hoping to stay with 93 octane since I don't have too many E85 options close by...

Hell I even tried calling gtm just so I could speak with sam himself on making things right but the phone just rang and rang...

Quote:

Originally Posted by hjo1078

cosmo are you planning on running 93 octane or e85 ?

04-14-2015, 03:01 PM	#1306 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	Quick Google search points to some stainless steel custom turbo headers. Maybe get some quotes? I don't know much, nor am I able to pursue anything let alone keeping it maintained. __________________

04-15-2015, 05:57 PM	#1309 (permalink)
Plasmite Enthusiast Member Join Date: Aug 2012 Location: Canada Posts: 259 Drives: '12 M6 Panty Peeler Rep Power: 13	Upgrade, upgrade, upgrade __________________ WISHLIST

04-22-2015, 06:19 AM	#1310 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	I finally got my blackstone oil results since I switched to synthetic and the break-in is looking pretty good so far.. MidnightBlueZ likes this.

04-22-2015, 08:22 AM	#1312 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Well just to let everyone know I have decided to ditch the gtm crap on my car and go with a custom precision 6466 single turbo kit. 6466 ball bearing T4 .96 AR Now these specs aren't set in stone so I may make some changes.. MidnightBlueZ and YzGyz like this.

04-22-2015, 08:26 AM	#1313 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	.96? So this isn't a twin scroll? And can you get a "custom" kit for cheaper than the BP kit you aforementioned? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-14-2015, 03:06 PM	#1307 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	To be honest I would consider a bp kit over the FI mainly because of cost.. It would just be too hard to replicate the ones we have now with no guarantee it would work or anything..

04-14-2015, 03:10 PM	#1308 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Not to mention the new z should be out next year and it is supposed to be forced induction so there's no telling what these guys are going to do who currently make turbo kits for our cars..

04-22-2015, 08:14 AM	#1311 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 17	That's great news! I just sent mine off a couple days ago so I'll be interested to see what they show.

04-22-2015, 12:28 PM	#1318 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 17	fair enough man, I understand the not wanting to wait part haha. keep us updated! always thought about getting someone to build me a single turbo kit but don't really have anyone I'd trust around me who have tackled similar builds before, gl with it all!

04-22-2015, 01:16 PM	#1319 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5396	cosmo are you planning on running 93 octane or e85 ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 08:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 05:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-02-2012 11:29 PM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 11:28 AM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 10:01 AM