Blown Motor, Engine Rebuild/Replacement.

COSMO · 09-02-2014, 06:04 PM

Well I got a call today from bobby today saying the clutch slave cylinder went out today. I already have the HD csc installed but now this blows my mind. He also said there was a small coolant leak in which they should be able to fix so maybe tomorrow so they can get some miles on it before the tune.. At this point everything has been replaced in the car.

jwick · 09-02-2014, 06:13 PM

Did you replace the CMC too? I find it hard to believe you had the HD CSC go out unless it was just faulty.

These CMCs seem to be one use items.

COSMO · 09-02-2014, 06:41 PM

No I didn't replace the clutch master cylinder but I guessing the car sitting up for almost a year could have failed due to moisture... I should have just bought an gtr..

jwick · 09-02-2014, 06:43 PM

The CMC is $100. If you didn't replace it, my money is on that's the issue not the CSC

MidnightBlueZ · 09-02-2014, 08:05 PM

Heard you'll be on the dyno Thursday.. Best of luck my friend.

Staples · 09-02-2014, 08:35 PM

Quote:

Originally Posted by jwick

The CMC is $100. If you didn't replace it, my money is on that's the issue not the CSC

x 2 ^

COSMO · 09-03-2014, 12:05 PM

Ok new master cylinder and 4 wheel alignment. Today bobby is actually driving my car putting some miles on it for the dyno tomorrow... Had a coolant leak yesterday but turns out it was only a loose hose clamp.. Stay Tuned.. Get it tuned?

zguynate · 09-03-2014, 12:45 PM

A friend of mine had his Z Speed slave fail on him last week. Its the first failure I have ever heard of.

1slow370 · 09-03-2014, 02:02 PM

Quote:

Originally Posted by dragonbreath

A friend of mine had his Z Speed slave fail on him last week. Its the first failure I have ever heard of.

nah there has been a handfull of them come up over the last couple years.

COSMO · 09-03-2014, 02:04 PM

That's not good.. Going to have to call zspeed and get the details.. You guys know your supposed to switch to the gtr clutch fluid right?

Quote:

Originally Posted by dragonbreath

A friend of mine had his Z Speed slave fail on him last week. Its the first failure I have ever heard of.

1slow370 · 09-03-2014, 02:08 PM

yeah when it comes down to it all z speed did was adapt an oem saab part with new lines and a bracket, so it is still going to fail occasionally. At least it is more hit and miss with the saab csc than the oe one which is guaranteed to fail at some point.

COSMO · 09-03-2014, 02:14 PM

Well crap, I thought they designed the hd csc to be total bullet proof.. And it's not like an easy part to remove and install since you have to pull the tranny every time...

Quote:

Originally Posted by 1slow370

yeah when it comes down to it all z speed did was adapt an oem saab part with new lines and a bracket, so it is still going to fail occasionally. At least it is more hit and miss with the saab csc than the oe one which is guaranteed to fail at some point.

COSMO · 09-03-2014, 02:15 PM

I thought zspeed was the only aftermarket alternative that's why I switched...

jwick · 09-03-2014, 02:18 PM

Quote:

Originally Posted by COSMO

I thought zspeed was the only aftermarket alternative that's why I switched...

Tilton makes one and Z1 has a complete vac delete option.

As for fluid I went straight synthetic

phunk · 09-03-2014, 02:19 PM

I wouldnt stress over it. Nothing on a car is bullet proof! Any moving parts you have added to your car have begun the process of wearing until failure the moment you installed them.

09-02-2014, 06:13 PM	#1037 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Did you replace the CMC too? I find it hard to believe you had the HD CSC go out unless it was just faulty. These CMCs seem to be one use items. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

09-02-2014, 06:41 PM	#1038 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	No I didn't replace the clutch master cylinder but I guessing the car sitting up for almost a year could have failed due to moisture... I should have just bought an gtr.. zguynate likes this.

09-02-2014, 06:43 PM	#1039 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	The CMC is $100. If you didn't replace it, my money is on that's the issue not the CSC GaleForce likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

09-02-2014, 08:05 PM	#1040 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 16	Heard you'll be on the dyno Thursday.. Best of luck my friend. fuct and COSMO like this.

09-03-2014, 12:05 PM	#1042 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Ok new master cylinder and 4 wheel alignment. Today bobby is actually driving my car putting some miles on it for the dyno tomorrow... Had a coolant leak yesterday but turns out it was only a loose hose clamp.. Stay Tuned.. Get it tuned? KaienZ34, zguynate, Infidel and 1 others like this.

09-02-2014, 06:04 PM	#1036 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Well I got a call today from bobby today saying the clutch slave cylinder went out today. I already have the HD csc installed but now this blows my mind. He also said there was a small coolant leak in which they should be able to fix so maybe tomorrow so they can get some miles on it before the tune.. At this point everything has been replaced in the car.

09-03-2014, 12:45 PM	#1043 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,053 Drives: 09 370z Rep Power: 73	A friend of mine had his Z Speed slave fail on him last week. Its the first failure I have ever heard of. __________________ 2009 370z touring w/sports package

09-03-2014, 02:08 PM	#1046 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	yeah when it comes down to it all z speed did was adapt an oem saab part with new lines and a bracket, so it is still going to fail occasionally. At least it is more hit and miss with the saab csc than the oe one which is guaranteed to fail at some point. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

09-03-2014, 02:15 PM	#1048 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I thought zspeed was the only aftermarket alternative that's why I switched...

09-03-2014, 02:19 PM	#1050 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,657 Drives: 370 Rep Power: 951234	I wouldnt stress over it. Nothing on a car is bullet proof! Any moving parts you have added to your car have begun the process of wearing until failure the moment you installed them. esfourteen and GaleForce like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 08:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 05:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-02-2012 11:29 PM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 11:28 AM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 10:01 AM