Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Blown Motor, Engine Rebuild/Replacement. (http://www.the370z.com/forced-induction/82635-blown-motor-engine-rebuild-replacement.html)

COSMO 03-16-2016 08:45 PM

Here is Bobby Ralston's mug shot from when he was convicted of Theft of State Funds for over 50k. If only I had known..

Robert Mitchell Ralston From Tampa, Florida Arrest | TampaArrests.Net - Tampa Bay, St. Petersburg and Clearwater, Florida Arrest Records and Mugshots

jwick 03-16-2016 09:23 PM

Sucks to have blown two motors but everything I've heard about Bobby's BS over the years, your experience doesn't surprise me.

Hopefully whoever you have building this one will put together the last motor you need.

COSMO 03-16-2016 09:28 PM

Man I'm hoping so. Actually you know him as the guy who made his own twin turbo setup (bryan).. BBR Racing located in GA..

Btw how is your car coming along? Built motor coming soon and more boost?




Quote:

Originally Posted by jwick (Post 3437762)
Sucks to have blown two motors but everything I've heard about Bobby's BS over the years, your experience doesn't surprise me.

Hopefully whoever you have building this one will put together the last motor you need.


COSMO 03-16-2016 09:33 PM

2 Attachment(s)
Here are some before and after pics of the lower intake..

Chuck33079 03-16-2016 09:34 PM

Man, that really sucks. Good luck with the new motor.

And good lord, that thing was making some major power before it let go. What's the goal now that you're going to a closed deck block? Do you have to address the cooling system again now that the water jacket is filled in?

Rusty 03-16-2016 09:35 PM

Quote:

Originally Posted by COSMO (Post 3437719)
Here is Bobby Ralston's mug shot from when he was convicted of Theft of State Funds for over 50k. If only I had known..

Robert Mitchell Ralston From Tampa, Florida Arrest | TampaArrests.Net - Tampa Bay, St. Petersburg and Clearwater, Florida Arrest Records and Mugshots

Damn! He looks older then 40! A lot older! :rofl2:

Chuck33079 03-16-2016 09:37 PM

Quote:

Originally Posted by Rusty (Post 3437771)
Damn! He looks older then 40! A lot older! :rofl2:


Meth is a hell of a drug. :rofl2:

And what an idiot. Steal from individuals and you can get away with it. Steal from the state and they'll throw you under the jail.

COSMO 03-16-2016 09:45 PM

The close deck run the same temp if not a little cooler during pulls. The reasons for this is the inserts connect the cylinders walls to the outside of the block transferring the heat to the outside of the block. The inserts slow the coolant flow down a bit to obsorb more heat






Quote:

Originally Posted by Chuck33079 (Post 3437770)
Man, that really sucks. Good luck with the new motor.

And good lord, that thing was making some major power before it let go. What's the goal now that you're going to a closed deck block? Do you have to address the cooling system again now that the water jacket is filled in?


jwick 03-16-2016 09:45 PM

Quote:

Originally Posted by COSMO (Post 3437764)
Man I'm hoping so. Actually you know him as the guy who made his own twin turbo setup (bryan).. BBR Racing located in GA..



Btw how is your car coming along? Built motor coming soon and more boost?


Ah that dude. He went awol from the forum after he started building that motor.

Car is running great. Haven't got the itch for more power since the G is severely hampered in tire size getting that power to the ground.

COSMO 03-16-2016 10:04 PM

He had some health issues and setting up his shop takes time and money. So far so good on the communication. I actually trailered the car up there and met him and he is a really honest guy. I will let him chime in to fill in the details of his car but I can say its finished with the gtr cams and others goodies it will be one of the highest hp z's on the planet.. Did I mention he has a closed deck block too?



Quote:

Originally Posted by jwick (Post 3437780)
Ah that dude. He went awol from the forum after he started building that motor.

Car is running great. Haven't got the itch for more power since the G is severely hampered in tire size getting that power to the ground.


jwick 03-16-2016 10:06 PM

He seems really knowledgeable.

Good he has is running so you know it's tested.

COSMO 03-16-2016 10:12 PM

I hear a few of you Houston guys are making a run over in our neck of the woods for Cars n Coffee?

https://www.facebook.com/events/173900942997954/




Quote:

Originally Posted by jwick (Post 3437787)
He seems really knowledgeable.

Good he has is running so you know it's tested.


jwick 03-16-2016 10:25 PM

There are some stupid power builds here.

BBRSpeedWorks 03-17-2016 08:04 AM

I'm still alive just stupid busy and had surgery to but I'll be updating my thead soon. I will also start one for the build on cosmo's car.

COSMO 03-17-2016 05:15 PM

Chuck are you still on that gtm kit? What did you ever do with those exhaust manifolds? Last I remember you were trying to find replacements?




Quote:

Originally Posted by Chuck33079 (Post 3437770)
Man, that really sucks. Good luck with the new motor.

And good lord, that thing was making some major power before it let go. What's the goal now that you're going to a closed deck block? Do you have to address the cooling system again now that the water jacket is filled in?



All times are GMT -5. The time now is 12:20 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2