04-07-2014, 11:27 AM
|
#16 (permalink)
|
|
Base Member
Join Date: Jun 2013
Location: Under a rock
Posts: 38
Drives: 06 350ZR
Rep Power: 13
|
Quote:
Originally Posted by Orestp
Thanks for the reply - but on a 370 - both inlet and outlet are on driver side - one at top and other at bottom.
Seems like anything I've been able to find says outlet is the bottom one - but would like to confirm.
Shop manual does not distinguish - which makes sense - it wouldn't matter since the AT fluid is only flowing through the rad.
|
Try this...when looking at the Jatco 7AT itself there should be (2) banjo fitted ports. Again using the 350Z (as that is what I have), the port closest to the vehicle front I believe was hot-side and the port towards the rear is cold-side. Trace your lines from those ports. I am going to guess the front port goes to the upper rad inlet and the bottom inlet runs back to the rear facing port - I am guessing here since I have not seen it on the 370.
__________________
Nitrous Outlet 57N 33F +NANO = 349whp/353wtq
|
|
|
Similar Threads
6Likes
Threaded Mode
