GTM Stage 1.5 supercharger build

Mkai0 · 09-07-2013, 11:08 AM

Agreed, those are great numbers. Remember, I have an AT and an HR. 11psi on a VHR is like pushing 13 psi on an HR, which would equal more hp. You know as well as I do Baer that dyno numbers can very greatly. I do know I gained 200 whp from baseline. Please remind us again how much horsepower you were pushing in your old 7AT setup??

Baer383 · 09-07-2013, 11:11 AM

Quote:

Originally Posted by Mkai0

Agreed, those are great numbers. Remember, I have an AT and an HR. 11psi on a VHR is like pushing 13 psi on an HR, which would equal more hp. You know as well as I do Baer that dyno numbers can very greatly. I do know I gained 200 whp from baseline. Please remind us again how much horsepower you were pushing in your old 7AT setup??

I had 480 to the wheels with my old car (7at)500 with meth.

You have Aquamist in your signature line if you are doing 450 on meth @ 10 psi somethings wrong.

And I don't use meth on my Nismo.

Mkai0 · 09-07-2013, 11:26 AM

My meth setup is for safety, not tuned for it (50/50 water/meth). I could easily run a slightly more aggressive tune and squeeze out 30 more horses. My 10psi would be like 8psi for your car (VHR). You do the math here. I can also easily run a smaller pulley to push me to 500whp mark, but the block is not built just yet. We should meet up for a fun run sometime, I think you would be surprised!

Baer383 · 09-07-2013, 11:33 AM

Quote:

Originally Posted by Mkai0

My meth setup is for safety, not tuned for it (50/50 water/meth). My 10psi would be like 8psi for your car (VHR). I can easily run a smaller pulley to push me to 500whp mark, but the block is not built just yet. We should meet up for a fun run sometime, I think you would be surprised

I think alott of you guys are going to be surprised when I get my car back on the dyno ,I have some new tunes for my car that I think are going to be pretty good B/C all I have is the 1.5 kit and my tune,John from Z1 thinks I'll be able to get 10-12 RWHP pushing me to 525 RWHP 400 RWTQ

09-07-2013, 11:08 AM	#1 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 15	Agreed, those are great numbers. Remember, I have an AT and an HR. 11psi on a VHR is like pushing 13 psi on an HR, which would equal more hp. You know as well as I do Baer that dyno numbers can very greatly. I do know I gained 200 whp from baseline. Please remind us again how much horsepower you were pushing in your old 7AT setup?? __________________ Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat..

09-07-2013, 11:26 AM	#3 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 15	My meth setup is for safety, not tuned for it (50/50 water/meth). I could easily run a slightly more aggressive tune and squeeze out 30 more horses. My 10psi would be like 8psi for your car (VHR). You do the math here. I can also easily run a smaller pulley to push me to 500whp mark, but the block is not built just yet. We should meet up for a fun run sometime, I think you would be surprised! __________________ Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat.. Last edited by Mkai0; 09-07-2013 at 11:48 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fillerbunnie's GTM Stage 1 Supercharger build (Australian RHD)	fillerbunnie	Forced Induction	46	08-23-2015 01:07 AM
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 04:50 PM
[FOR SALE] GTM Stage II 600hp Supercharger Kit	boraturbo	Parts for sale (Private Classifieds)	6	10-05-2012 01:11 AM
[FOR SALE] Used Gtm stage 1 supercharger kit	Jamaica	Parts for sale (Private Classifieds)	58	06-20-2012 09:12 PM