Boosted Performance round 2 list

jlo370z · 03-20-2014, 06:18 PM

Quote:

Originally Posted by dragonbreath

I installed my clutch/flywheel/csc on Tuesday. Ill hopefully be starting the turbo install Wednesday. Talk about excited!

my intentions is to start right behind you on Friday. got a fed ex notice today, uprev on the way.

Boosted Performance · 03-20-2014, 07:02 PM

Quote:

Originally Posted by AlexRaymond19

That sounds like an amazing idea!

Sasha, after the round is done, how soon do you expect the next round to roll out?

Hope to have a couple of kits around come May. Can't say for sure, but that is the goal.

Quote:

Originally Posted by jwick

If I read into this properly you are going to make it to replace the last section of downpipe and recir piping? So for those of us that might want to run it full time it would v-band right up as a replacement for that last section?

Depending on exhaust fume smell once the car is fully tuned, I'm might order one from you to just run full time. I'd rather have something fabricated by you than have the random shop chop up the piping on the kit.

Once I have one of the donor cars back (provided I can sway him to bring the car for a week) I would look in to alternatives in order to give you guys more options. I can't say that it would work out 100%, but it is something I would look in to for sure.

This would also mean another set of jigs for everything after the turbo, and that is time consuming.

Mr.Squeeze · 03-21-2014, 10:30 AM

Quote:

Originally Posted by Boosted Performance

No need to upgrade the MAF sensors. The charge pipes are 2.75" and the OEM sensors are good for a lot more power than the stock block can handle.

If you do end up building the engine, I can always make some 3" charge pipes as well. This will be a lot cheaper than a pair of aftermarket MAF sensors.

One my setup with 3 inch GTM charge pipes I started to get close to maxing out my MAF's after 550whp our so. I do think a stock block car can get away with a little more than that.

AlexRaymond19 · 03-21-2014, 12:18 PM

Quote:

Originally Posted by dragonbreath

I installed my clutch/flywheel/csc on Tuesday. Ill hopefully be starting the turbo install Wednesday. Talk about excited!

Exciting!!! How did you find the install? Going to do mine by myself. What DIY thread did you use, if any?

[QUOTE=TopgunZ;2745621]Or do this. It cost me $75 total for Bluetooth obdII and used tablet and I have displayed AFR/Boost/Water temp/Intake Temp/EGT's/Timing Advance/MAF/and my ever missed Speedo! Its incredible. Plus my background is CARVIS which plays off of Iron Mans JARVIS system. Same look like he has in his HUD. Everyone loves it. It also talks to you when you have hit certain limits! Which is even cooler than alarms..lol.. If that layout isn't your thing you can switch to any of hundreds of themes and create your own gauge layout and look.

It also reads out current Horsepower and Torque which I have on another page of the layout which you just swipe your finger across the tablet to view. You can have up to 6 different pages of gauges.

You can even track your cars route with it. It has a REAL mpg indicator if you punch in the numbers at the E85 pump station.

Wow, this looks amazing! Sounds like a cheaper alternative too. How accurate do you find it?

TopgunZ · 03-21-2014, 02:13 PM

Quote:

Wow, this looks amazing! Sounds like a cheaper alternative too. How accurate do you find it?

Well the speedo matches exactly to my needle and the radars along side the road. Rev's are the exact same. The water temp is spot on. My AFR seems to be accurate. EGT's seem to be in the right ballpark. But again, I don't trust the boost gauge as it says the max boost level my car has ever seen is 1.5lbs which is impossible since I'm still NA..lol.

jofro6 · 03-21-2014, 02:24 PM

What program is that you are running on the tablet? Def looks sick

TopgunZ · 03-21-2014, 09:49 PM

Quote:

Originally Posted by jofro6

What program is that you are running on the tablet? Def looks sick

Its torque pro with the nissan advanced. Add on is the carvis but it came in a pack with a few other wicked themes.

Joepro · 03-22-2014, 08:11 AM

My EBC is coming tuesday, any BP owners help me out with a diagram to plumb this thing?

m3chhawk · 03-22-2014, 02:11 PM

Here's my chicken scratch from my HKS EVC-S

Cell · 03-22-2014, 02:34 PM

This is what I did.

jwick · 03-22-2014, 08:40 PM

Quote:

Originally Posted by Cell

This is what I did.

Pretty much how my Profec details it out but you'll also need a pressure source line (i.e. from Intake Manifold) to the controller module itself too.

jlo370z · 03-23-2014, 01:47 PM

Pulled her out of storage and delivered her to the doctors office. Tear down starts Thursday .

Sent from my iPhone using Tapatalk

jwick · 03-23-2014, 02:28 PM

Quote:

Originally Posted by jlo370z

Pulled her out of storage and delivered her to the doctors office. Tear down starts Thursday .

Sent from my iPhone using Tapatalk

Are you not performing the install yourself?

jlo370z · 03-23-2014, 02:30 PM

Quote:

Originally Posted by jwick

Are you not performing the install yourself?

I am, with a friend at his house. he has all the tools

jwick · 03-23-2014, 02:31 PM

Quote:

Originally Posted by jlo370z

I am, with a friend at his house. he has all the tools

Me too as my buddy has a lift!

03-21-2014, 02:24 PM	#876 (permalink)
jofro6 Track Member Join Date: Mar 2012 Location: Long Island, NY Posts: 603 Drives: 2012 370Z Touring Rep Power: 15	What program is that you are running on the tablet? Def looks sick __________________ 2012 Red 6Spd Touring/Nav.. FI CF NonRes CBE and Res TP #682 Fly1 RS1 CF Fenders

03-22-2014, 08:11 AM	#878 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	My EBC is coming tuesday, any BP owners help me out with a diagram to plumb this thing? __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

03-22-2014, 02:11 PM	#879 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 25	Here's my chicken scratch from my HKS EVC-S __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

03-23-2014, 01:47 PM	#882 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43427	Pulled her out of storage and delivered her to the doctors office. Tear down starts Thursday . Sent from my iPhone using Tapatalk __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM

03-22-2014, 02:34 PM	#880 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 22	This is what I did.