GTM Performance Engineering: MHI Twin Turbo Official Release

SPOHN · 05-21-2013, 05:50 AM

I'm sticking with 18G.

Dzel · 05-21-2013, 07:43 AM

Ditto

SPOHN · 05-21-2013, 09:52 AM

Tearing down my car this weekend. Still not sure if I want to pull the motor. It's not hard but.... We'll see.

COSMO · 05-21-2013, 11:54 AM

Hey man if you have the means to pull it I would recommend it but then again for your turbo install you don't have to do a lot of things the original kit had... You guys are really lucky because that install should be a piece of cake....

Wattles · 05-21-2013, 06:05 PM

Quote:

Originally Posted by SPOHN

I'm sticking with 18G.

I have the 16G and it spools nicely and dyno'ed at 550 with no exhaust.
Don't know how much more you'll get with 18G.

Nixlimited · 05-21-2013, 06:17 PM

Quote:

Originally Posted by Wattles

I have the 16G and it spools nicely and dyno'ed at 550 with no exhaust.
Don't know how much more you'll get with 18G.

I'm hoping for dynojet equivalent of 500/450 on 16Gs with test pipes at 2.5" FI.

MavRick · 05-21-2013, 06:29 PM

Quote:

Originally Posted by Wattles

I have the 16G and it spools nicely and dyno'ed at 550 with no exhaust.
Don't know how much more you'll get with 18G.

when you say 'no exhaust'...do you mean that you havent modded your exhaust or that you deleted it?

prolly a dumb question but humor a n00b.

MavRick · 05-21-2013, 06:38 PM

nevermind...i just searched and saw your setup. nice numbers, man...

Alstann · 05-23-2013, 09:26 AM

8 more days in May! We must be close to updates.

G37sHKS · 05-23-2013, 11:24 AM

Quote:

Originally Posted by Alstann

8 more days in May! We must be close to updates.

I really wish their oil pan is affordable and not 4 digit number, otherwise people will get the turbo kit without the oil pan to get cheaper price

Im waiting for that oil pan!!

BlkNismo · 05-23-2013, 11:42 AM

Quote:

Originally Posted by G37sHKS

I really wish their oil pan is affordable and not 4 digit number, otherwise people will get the turbo kit without the oil pan to get cheaper price

Im waiting for that oil pan!!

oil pan is included with the kit.

SPOHN · 05-23-2013, 11:56 AM

I highly doubt the oil pan would be $$$$. Probably half that.

ts-c63 · 05-23-2013, 02:33 PM

Quote:

Originally Posted by Wattles

I have the 16G and it spools nicely and dyno'ed at 550 with no exhaust.
Don't know how much more you'll get with 18G.

did u do anything to the trans? how does it hold up with that power?

Nixlimited · 05-23-2013, 03:10 PM

Quote:

Originally Posted by ts-c63

did u do anything to the trans? how does it hold up with that power?

His signature says GTM VB upgrade.

SAM@GTM · 05-23-2013, 03:40 PM

Pictures of the actual production oil pan are coming shortly, You guys are going to love it .

Sam

05-21-2013, 05:50 AM	#676 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I'm sticking with 18G. __________________

05-21-2013, 07:43 AM	#677 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Ditto __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

05-21-2013, 09:52 AM	#678 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Tearing down my car this weekend. Still not sure if I want to pull the motor. It's not hard but.... We'll see. __________________

05-21-2013, 11:54 AM	#679 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Hey man if you have the means to pull it I would recommend it but then again for your turbo install you don't have to do a lot of things the original kit had... You guys are really lucky because that install should be a piece of cake.... SPOHN and Footloose301 like this.

05-21-2013, 06:38 PM	#683 (permalink)
MavRick Base Member Join Date: Feb 2013 Location: atlanta Posts: 66 Drives: 2010 Roadster 6MT Rep Power: 12	nevermind...i just searched and saw your setup. nice numbers, man... __________________ Miss you, Pops...

05-23-2013, 09:26 AM	#684 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 14	8 more days in May! We must be close to updates. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

05-23-2013, 11:56 AM	#687 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I highly doubt the oil pan would be $$$$. Probably half that. __________________

05-23-2013, 03:40 PM	#690 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 17	Pictures of the actual production oil pan are coming shortly, You guys are going to love it . Sam Nixlimited, G37sHKS, SPOHN and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM