GTM Performance Engineering: MHI Twin Turbo Official Release

SPOHN · 04-29-2013, 10:36 AM

Yes the EWG are going to be open dumb. I love freighting people.

Dzel · 04-29-2013, 10:36 AM

How much more would it be? For exw?

SPOHN · 04-29-2013, 11:41 AM

Talked to Sam. Recirculated pipes will be an option for EWG.

Alstann · 04-29-2013, 12:30 PM

Hey Spohn, if you do decide to visit them...hold Sam/Mike hostage until they give you a ship date.

Mike@GTM · 04-29-2013, 01:58 PM

Quote:

Originally Posted by Footloose301

Gotcha. Yeah this is why many prefer external waste gates I suppose.

Is there any reason the HKS electronic boost controller like the evc 6 will NOT work with this internal wastegates?

I want to be able to adjust between 8-11psi.

Yes, the HKS EVC 6 will work wonderfully with the internal wastegates.

Quote:

Originally Posted by edub370

anyone know how the ewg's are gonna be ran? i havent read thru every page, so if it's been mentioned sry in advance. but are these gonna be routed back into the exhaust or open dumps? if open dumps, then hellll yea. i love the ease of internal wg's, but im slightly worried about boost creep with my 2.5" test pipes

The standard option for our 3" downpipes with external wastegates is for open dump. Keep in mind that the 3" downpipes end where the cat-back begins. There is no need to worry about boost creep with the 2.5" test pipes and the 18g's.

Quote:

Originally Posted by KaienZ34

Recirculated external wastegtes, is that an option?

Yes, it is an extra cost option for recirculating.

Quote:

Originally Posted by Alstann

Hey Spohn, if you do decide to visit them...hold Sam/Mike hostage until they give you a ship date.

lol We'll be giving an accurate ship date and that requires knowing when every little detail will be ready. There are still a few unknowns right now as to when a couple items will be ready to go. Once we have that information, we'll be announcing it. We are shooting for sometime in June/July. We'll firm it up once we know when everything will be ready though.

indyn · 05-02-2013, 09:40 AM

Quote:

Originally Posted by Mike@GTM

We'll be giving an accurate ship date and that requires knowing when every little detail will be ready. There are still a few unknowns right now as to when a couple items will be ready to go. Once we have that information, we'll be announcing it. We are shooting for sometime in June/July. We'll firm it up once we know when everything will be ready though.

Mike, can't the kits be shipped earlier than June/July; given the number of ppl signing up and by the time one gets it installed half the summer will be done. Won't give us too much time to enjoy this kit.

edub370 · 05-02-2013, 09:43 AM

Quote:

Originally Posted by indyn

Mike, can't the kits be shipped earlier than June/July; given the number of ppl signing up and by the time one gets it installed half the summer will be done. Won't give us too much time to enjoy this kit.

i'd rather them get the kits out a little later but have the them 100% spot on, over rushing them out with a bug or 2. I'm about as ready as u can get for this release, but i want them to get the r&d completed before shipping any out

indyn · 05-02-2013, 09:49 AM

Quote:

Originally Posted by edub370

i'd rather them get the kits out a little later but have the them 100% spot on, over rushing them out with a bug or 2. I'm about as ready as u can get for this release, but i want them to get the r&d completed before shipping any out

i thought the R&D was done!!

lww · 05-06-2013, 12:52 AM

Quote:

Originally Posted by indyn

Mike, can't the kits be shipped earlier than June/July; given the number of ppl signing up and by the time one gets it installed half the summer will be done. Won't give us too much time to enjoy this kit.

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

roplusbee · 05-06-2013, 08:02 AM

Quote:

Originally Posted by lww

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

indyn · 05-06-2013, 10:10 AM

Quote:

Originally Posted by lww

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

anything past June/July would be pushing it. Hopefully they'll be shipped at that time.

rhd · 05-06-2013, 10:25 PM

Quote:

Originally Posted by lww

I'd much rather run this kit on a nice cool October Saturday afternoon than a scalding hot day in July!

Fall weather makes turbos more fun!

There not running too damn bad in MAY...

Dzel · 04-29-2013, 01:46 PM

How much?

SPOHN · 04-29-2013, 01:51 PM

Not sure. GTM has a lot of there parts on there website. So that will give you a good idea.

Dzel · 04-29-2013, 01:57 PM

Go back to GTM Spohn you have given us nothing! Lol

04-29-2013, 10:36 AM	#1 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 47 Posts: 14,844 Drives: Waiting on next Z Rep Power: 223	Yes the EWG are going to be open dumb. I love freighting people. __________________

04-29-2013, 10:36 AM	#2 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	How much more would it be? For exw? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-29-2013, 11:41 AM	#3 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 47 Posts: 14,844 Drives: Waiting on next Z Rep Power: 223	Talked to Sam. Recirculated pipes will be an option for EWG. __________________

04-29-2013, 12:30 PM	#4 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 16	Hey Spohn, if you do decide to visit them...hold Sam/Mike hostage until they give you a ship date. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

04-29-2013, 01:46 PM	#13 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	How much? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-29-2013, 01:51 PM	#14 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 47 Posts: 14,844 Drives: Waiting on next Z Rep Power: 223	Not sure. GTM has a lot of there parts on there website. So that will give you a good idea. __________________

04-29-2013, 01:57 PM	#15 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	Go back to GTM Spohn you have given us nothing! Lol __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM