GTM Performance Engineering: MHI Twin Turbo Official Release

Baer383 · 07-08-2013, 08:22 PM

Quote:

Originally Posted by cosmogirl

Since I cant seem to get anything from gtm does anyone know anything about where to tap the plenum for a meth injection? I remember reading it somewhere online but cant seem to find it now. Since my TT is installes and bugs finally worked out Iam looking to safe guard the motor but read somewhere that instead of tapping both intakes for jets that only one could be used in the plenum.. Mike did you forget about working me up a price for my meth kit??? Sometimes I feel gtm may be getting too big for their own good but Iam guessing time will tell when these 100+ people have to call for help and get blown off....

I installed mine in the intake pipe behind the MAF but before the throttle bodies.

COSMO · 07-08-2013, 09:04 PM

Baer383 what kit did you go with and what size jets? Iam sorry people I know it sounds bad of me taking about gtm but in fact I am one of their biggest fans. I only wish they had more time and people to help others who have vested in their company to be able to help and follow up when needed...

ba

Quote:

Originally Posted by Baer383

I installed mine in the intake pipe behind the MAF but before the throttle bodies.

Baer383 · 07-09-2013, 05:22 AM

Quote:

Originally Posted by cosmogirl

Baer383 what kit did you go with and what size jets? Iam sorry people I know it sounds bad of me taking about gtm but in fact I am one of their biggest fans. I only wish they had more time and people to help others who have vested in their company to be able to help and follow up when needed...

ba

I used a Snow Performance kit the jet size ,I don't remember b/c that was last year I don't use it anymore but it did yield about 30 rwhp.

Dzel · 07-08-2013, 09:55 PM

It would be awesome if Sam started a Q&A thread for installation questions and other stuff that might come up.

Sent with TapAhoe

COSMO · 07-08-2013, 10:15 PM

Now there's an idea and to think how much time it would save them if they had more issues already covered in a Q&A.. I wanted to support gtm in my future wants and needs for my build but when they cant even get back with me on items Iam needing it tells me they are getting too big for their own good. Understanding they have their hands full working on alot of new and upcoming things customer service and return business should always remain at the top of the list... Knowing mike will get on here tomorrow and see this only to make excuses for why gtm cant keep up with their own products I conclude my rant is over...

Quote:

Originally Posted by Dzel

It would be awesome if Sam started a Q&A thread for installation questions and other stuff that might come up.

Sent with TapAhoe

elperuano · 07-08-2013, 10:52 PM

Research research research. Nothing new going on.

Dzel · 07-09-2013, 06:42 AM

Would you get a better delivery if you drilled into the plenum for the meth?

Sent with TapAhoe

COSMO · 07-09-2013, 09:22 AM

From what I understand you would only have to use 1 jet instead of tapping 2 of the intake pipes. Don't quote me on that though.. I have a friend in texas with a aps single turbo kit on his 2003 350z with almost 200k and he uses the aem meth injection kit. Seeing that and after riding in his car has made me a believer in going with the meth kit.

Quote:

Originally Posted by Dzel

Would you get a better delivery if you drilled into the plenum for the meth?

Sent with TapAhoe

Baer383 · 07-09-2013, 02:13 PM

Quote:

Originally Posted by cosmogirl

From what I understand you would only have to use 1 jet instead of tapping 2 of the intake pipes. Don't quote me on that though.. I have a friend in texas with a aps single turbo kit on his 2003 350z with almost 200k and he uses the aem meth injection kit. Seeing that and after riding in his car has made me a believer in going with the meth kit.

You need to put 2 nozzles in 1 in each intake pipe about 6in in front of the throttle body's but behind the MAF's.

SPOHN · 07-09-2013, 10:01 AM

Meth kits can use 1-6 ports depending what type of system you want to run. Look on GTM's website or google search some of there setups. They have a lot of different ways to set up meth kits. Some are pretty amazing but not for me.

Dzel · 07-09-2013, 10:27 AM

Here's a dumb question do you need to tune the cat with the meth injection or can you add it on after with no need to tune

Sent with TapAhoe

Dzel · 07-09-2013, 10:27 AM

Car'

Sent with TapAhoe

Chuck33079 · 07-09-2013, 10:30 AM

I'd always recommend a retune after adding meth, but it really depends on what you want from it. You'd need a retune to add the additional power it would allow you. You might be able to get away with not retuning it if you're just using it to increase octane for safety, and not adding any more timing. That being said, I'd always retune after adding something like meth on a FI car.

Dzel · 07-09-2013, 11:26 AM

Copy that! I would like to be able to get the hp numbers I want and at the same time be able to run less boost

Sent with TapAhoe

Alstann · 07-09-2013, 11:33 AM

Quote:

Originally Posted by Dzel

Copy that! I would like to be able to get the hp numbers I want and at the same time be able to run less boost

Sent with TapAhoe

This exactly. Right here is why I want to go meth - just to keep the motor running stronger and under less pressure. Long term baby.

07-08-2013, 09:55 PM	#4 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	It would be awesome if Sam started a Q&A thread for installation questions and other stuff that might come up. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-09-2013, 06:42 AM	#7 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Would you get a better delivery if you drilled into the plenum for the meth? Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-09-2013, 10:01 AM	#10 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Meth kits can use 1-6 ports depending what type of system you want to run. Look on GTM's website or google search some of there setups. They have a lot of different ways to set up meth kits. Some are pretty amazing but not for me. __________________

07-09-2013, 10:27 AM	#11 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Here's a dumb question do you need to tune the cat with the meth injection or can you add it on after with no need to tune Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-09-2013, 10:27 AM	#12 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Car' Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-08-2013, 10:52 PM	#6 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Research research research. Nothing new going on.

07-09-2013, 10:30 AM	#13 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	I'd always recommend a retune after adding meth, but it really depends on what you want from it. You'd need a retune to add the additional power it would allow you. You might be able to get away with not retuning it if you're just using it to increase octane for safety, and not adding any more timing. That being said, I'd always retune after adding something like meth on a FI car. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-09-2013, 11:26 AM	#14 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Copy that! I would like to be able to get the hp numbers I want and at the same time be able to run less boost Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM