Stillen Supercharger reliabiity

EVOHUNTER · 12-20-2012, 08:53 AM

Quote:

Originally Posted by Nissan370

advice get a good tune. the stillen kit will serve you fine but its not make for any real power with out modification the head unit is a good unit and makes good power but the kit with water to air cooler and maf positioning limits the head units power with out modification

i will post my dyno numbers today or tommorow

436/340 @ 9psi

i added water/meth and cog pullies

numbers will be added

and if i dont go turbo next year i iwill add longtubes,ysi-trim and move the maf behind the blower with a new intake pipe

This still will not fix the weird MAF readings, The MAF's will still be before the intercooler, So the maf/s read before the intercooler, once it hits our intercooler the maf readings change.
The only way is to dump the air to water kit and move to air to air and scap that useless intake mani.
Me and sasha are going to look into it in the spring time.
I love my stillen kit, But when its hot out -80-100 degrees The cooling system can not keep up.
Pulls alot of timing.
But over all after a good tune, the kit is great.

Nissan370 · 12-20-2012, 09:48 AM

we were looking at doing some kinda split pipping after the blower then your maf then into your stillen intake

the combo of using water-meth and upgraded to the water-air cooler should be fine

EVOHUNTER · 12-20-2012, 12:25 PM

I have a pipe that was fabed, it fits, just doesnt do what we want.
Where gonna put back on the stock intake mani, Run the piping like the stillen gen 3, have the maf's in the stock postion.
Sashas already looked at it, and said its do-able.
new intercooler upfront. Should work out good, im looking forward to it.

12-20-2012, 09:48 AM	#2 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 16	we were looking at doing some kinda split pipping after the blower then your maf then into your stillen intake the combo of using water-meth and upgraded to the water-air cooler should be fine __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

12-20-2012, 12:25 PM	#3 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 16	I have a pipe that was fabed, it fits, just doesnt do what we want. Where gonna put back on the stock intake mani, Run the piping like the stillen gen 3, have the maf's in the stock postion. Sashas already looked at it, and said its do-able. new intercooler upfront. Should work out good, im looking forward to it. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Supercharger	Skarekrow	Forced Induction	32	12-17-2012 05:40 PM
[FOR SALE] Stillen Supercharger kit. Like New!!	king12sky	Parts for sale (Private Classifieds)	32	12-01-2012 12:03 AM
[FOR SALE] FS/FT Like New Stillen Supercharger kit	Ipl 370gt	Parts for sale (Private Classifieds)	5	11-04-2012 06:54 PM
stillen supercharger with hfc	chases2302	Forced Induction	2	09-07-2012 08:03 AM
Stillen or gtm supercharger?	germanattitud	Forced Induction	34	08-07-2011 01:47 PM