Starting problem after stillen supercharger install

hindi1973 · 08-27-2012, 02:57 PM

after the tt install we got the air bag flashing as well , we the steps mentioned below and it never came back . hope this helps

important :Turn the ignition off as soon as the airbag light goes out the first time.

If you have the airbag light blinking here is how to reset it:

1. Push the start button two times (Ignition on but engine not started).

2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off INSTANTLY.

3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)

4. Repeat steps 1-3 two more times until you have done the cycle three times.

5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.

6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.

If it does not work the first time, just repeat the steps again.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O2 Sensor problem after FI LTH install	scott982	Intake/Exhaust	36	06-26-2018 08:53 PM
FI TP install problem help	persiani	Engine & Drivetrain	5	08-25-2012 10:11 PM
K&N Typhoon Install problem	VaGntlmn	Intake/Exhaust	55	06-26-2012 04:23 PM
Coilover install problem	sig11	Brakes & Suspension	16	03-29-2012 07:01 AM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 02:21 AM

08-27-2012, 02:57 PM	#6 (permalink)
hindi1973 Base Member Join Date: Mar 2011 Location: unknown Posts: 177 Drives: twinturbo 370z Rep Power: 16	after the tt install we got the air bag flashing as well , we the steps mentioned below and it never came back . hope this helps important :Turn the ignition off as soon as the airbag light goes out the first time. If you have the airbag light blinking here is how to reset it: 1. Push the start button two times (Ignition on but engine not started). 2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off INSTANTLY. 3. Count to 5 (1 Mississippi, 2 Mississippi . . . .) 4. Repeat steps 1-3 two more times until you have done the cycle three times. 5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry. 6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing. If it does not work the first time, just repeat the steps again.