Nissan 370Z Forum  

GTM Performance Engineering:PROJECT: VQ42VHR S/C

Originally Posted by Z eliminator Plus the stock block had no meth on it either ? thats good for atleast 40 wrhp. interesting i would love to know what that

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Closed Thread
 
LinkBack Thread Tools Display Modes
Old 05-31-2012, 04:04 AM   #1 (permalink)
Banned
 
Join Date: Apr 2012
Location: Canoga
Posts: 505
Drives: Myself crazy
Rep Power: 0
NitrousZ34 is on a distinguished road
Default

Quote:
Originally Posted by Z eliminator View Post
Plus the stock block had no meth on it either ? thats good for atleast 40 wrhp.
interesting
i would love to know what that setup cost on the 4.2.block with SC and all the toys?
the 4.2 block will out last the stock 3.7 block over the long run.
Z
Im in on knowing the total cost for the stroker kit also. How would a 4.2 block with FI fair as a DD? Im thinking of doing the GTM TT kit with either a fully built 3.7 or a stroked motor. I know its not ideal to DD a car with that much power and that type of motor but my question is how long would either motor last if it was driven daily, not pushed to the limits, but driven spirited
NitrousZ34 is offline  
Old 05-31-2012, 07:46 AM   #2 (permalink)
Track Member
 
The Dimer's Avatar
 
Join Date: Mar 2011
Location: Bolingbrook, IL
Posts: 632
Drives: 2010 PW 370z
Rep Power: 17
The Dimer has a spectacular aura aboutThe Dimer has a spectacular aura about
Default

Quote:
Originally Posted by NitrousZ34 View Post
Im in on knowing the total cost for the stroker kit also. How would a 4.2 block with FI fair as a DD? Im thinking of doing the GTM TT kit with either a fully built 3.7 or a stroked motor. I know its not ideal to DD a car with that much power and that type of motor but my question is how long would either motor last if it was driven daily, not pushed to the limits, but driven spirited
Well here's a link to the stage 5 longblock from the GTM website. It has sections listing parts and labor, so I'm guessing this is how much it would cost you for the end product. Could be wrong, though.

GTM Motorsports*::*PERFORMANCE ENGINES*::*GTM Stage 5 VQ35HR Hi-Rev 4.2L Stroker Longblock
__________________
K&N Drop-Ins, Z1 Post-MAF Tubes, FI 18" CF TDX, TWM Short Throw Shifter w/ A6 Leopard Knob, 'esfourteen' clutch helper spring, 'kellyefields' hood struts.
The Dimer is offline  
Old 05-31-2012, 02:02 PM   #3 (permalink)
Not an active Vendor. DO NOT BUY
 
Join Date: Sep 2009
Location: California
Posts: 391
Drives: '13 Hot Lava FR-S
Rep Power: 19
Mike@GTM is a splendid one to beholdMike@GTM is a splendid one to beholdMike@GTM is a splendid one to beholdMike@GTM is a splendid one to beholdMike@GTM is a splendid one to beholdMike@GTM is a splendid one to beholdMike@GTM is a splendid one to beholdMike@GTM is a splendid one to behold
Default

Quote:
Originally Posted by NitrousZ34 View Post
Im in on knowing the total cost for the stroker kit also. How would a 4.2 block with FI fair as a DD? Im thinking of doing the GTM TT kit with either a fully built 3.7 or a stroked motor. I know its not ideal to DD a car with that much power and that type of motor but my question is how long would either motor last if it was driven daily, not pushed to the limits, but driven spirited
The total cost is going to depend on what all else is being done at the same time. Daily driving a stroked engine is no different than daily driving a V8: you don't have to floor it everywhere you go. The nice thing is that the extra torque feels really good when you're off boost. Then when you're on it...well, hang on to your butts.

A daily driven build will last a long time, even when driven spiritedly. That's the whole point of doing a built motor in the first place. Like it was mentioned in the OP, we set bearing clearances depending on what the car is going to be used for. A daily driven motor build will have fairly tight clearances compared to a full race build. It just won't be quite as tight as OE because you will be making more power. Bearings are the components that wear out on built motors...not connecting rods, not pistons, not crankshafts. That's why it is so important to accurately describe how the engine will be used...ultimately that dictates how the motor will be built.
Mike@GTM is offline  
Old 06-01-2012, 10:57 PM   #4 (permalink)
Banned
 
Join Date: Apr 2012
Location: Canoga
Posts: 505
Drives: Myself crazy
Rep Power: 0
NitrousZ34 is on a distinguished road
Default

Quote:
Originally Posted by Mike@GTM View Post
The total cost is going to depend on what all else is being done at the same time. Daily driving a stroked engine is no different than daily driving a V8: you don't have to floor it everywhere you go. The nice thing is that the extra torque feels really good when you're off boost. Then when you're on it...well, hang on to your butts.

A daily driven build will last a long time, even when driven spiritedly. That's the whole point of doing a built motor in the first place. Like it was mentioned in the OP, we set bearing clearances depending on what the car is going to be used for. A daily driven motor build will have fairly tight clearances compared to a full race build. It just won't be quite as tight as OE because you will be making more power. Bearings are the components that wear out on built motors...not connecting rods, not pistons, not crankshafts. That's why it is so important to accurately describe how the engine will be used...ultimately that dictates how the motor will be built.
Thanks Mike for the detailed response. That was the only thing i would be worried about before dropping a huge sum of cash on a well thought out build, and then have it blow up because i get on it to often. The car would be driven MAYBE at MOST 4-5 a week and no more than 20 miles a day. I have only driven my 350z about 650 miles in the last 2 and a half months. When i do drive it, those are pretty hard miles with a decent amount of redlines, and a 150 shot on a stock block to top it off lol.
NitrousZ34 is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE SAM@GTM Forced Induction 1161 02-16-2014 09:21 PM
GTM Performance Engineering Spec Supercharged Nismo 370Z SAM@GTM Forced Induction 75 05-07-2012 02:10 AM
GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond SAM@GTM Forced Induction 1588 08-20-2011 12:19 PM
GTM Performance Engineering Supercharger CARB kit Test Car Needed SAM@GTM Forced Induction 26 10-14-2010 03:49 PM
GTM Performance Engineering & Forged Performance azn370z Forced Induction 59 04-14-2010 01:07 AM


All times are GMT -5. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2