Zex kit install 100 shot

V8Killer

Okay here are a few more pictures of what is going on with install. It actually works out that I am not doing the tune tomorrow b/c we still have to install the bottle bracket,window switch,bottle heater and blow down tube. We dressed it up a little today and ran some wires, put some rubber grommets in so the lines won't rub around the holes we drilled. In the picture of the lower plastic of the steering column you can see I have two switches mounted. The first one will be an activation switch and the second on the right is my purge.If you look at the picture of the right driver side intake we had to improvise and buy some metal brake line b/c the piece of metal that is included for the purge is just way to short to run anywhere in the car. As we all know we have limited space in our cars to work with. So that line runs all the way to the bottom of my car and pokes out a little at the very front. If you look at the picture that shows over the battery box area how we ran all the wires from the zex "brain" box and purge underneath the glove box and through to the other side for a very neat install. More pictures to come when the install is complete. Enjoy the pics guys!

Attached Images

	photo(7).jpg (668.1 KB, 232 views)
	photo(8).jpg (541.0 KB, 188 views)
	photo(9).jpg (793.7 KB, 169 views)
	photo(10).jpg (589.1 KB, 153 views)
	photo(11).jpg (744.2 KB, 161 views)
	photo(12).jpg (789.8 KB, 189 views)
	photo(13).jpg (667.6 KB, 233 views)
	photo(14).jpg (719.7 KB, 183 views)
	photo(15).jpg (872.1 KB, 174 views)

__________________
"Punch"

Too much to list and a baby shot of nitrous....