Here's alittle peek at something! Lol

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Guys running nitrous. I get my new box today and after talking to zex they said i should tap into somewhere else instead of the tpms. Did any body tap the box in a different location for consistent voltage?

Update New Box came in and ....
 

Okay guys my zex box finally came back in and we hooked it up no problem. 1st run we data logged no problem, then the 2nd one and all off a sudden I started miss firing like crazy after some back fire. We barely made it back to my buddies house and pulled the spark plugs and this is what we found. We won't know till Saturday when I put the new plugs in if there was anything else damaged.

So you did not install 1 step colder plugs ? Also what size shot did u spray ???

I did install 1 step colder plugs and I did 100 shot.

That's scary ... Wonder why that happened ?? Any searches on the net ??

Every time I think I may go this way, something like this pops up and sets me back. Sh!t what the......I really hope nothing else happened, but from the look of those plugs :shakes head:

Did u retard the timing ????

Yes

Combination of things either too lean or not enough timing pulled out. Working with tuner, will try again when plugs get in on Saturday.

Waiting to hear some good news from you!

Just got the spark plugs in, installing them in now. Hopefully the car starts up with no issues. Then we will go from there on data logging.

:eekdance:






DAN

Motor is ******. Started it up, and it throws the code for multiple misfire. Just pulled one of the plugs out and it started to get a coating of oil on it.

Get a scope and look down through the spark plug holes and see if you can find a crack/etc especially in the ones that have oil on the plugs.