Zex kit install 100 shot

fuct · 04-13-2012, 10:46 AM

Quote:

Originally Posted by gaveup

What would you have wanted him to mount it to?

"Hey man, that wood mounting is cheap. You should have mounted it on a carbon fiber diamond studded mounting board and then dipped the whole thing in gold. Anything else is uncivilized."

Really?

im all for N2O, but mounting your bottle to a block of wood is ghetto. make a mount so you can attach it to the floor of the hatch, or anything other than a stupid slab of wood......

One_Quick_Z · 04-13-2012, 12:14 PM

Get this thread back on track dont bash the wood block...

DAN

whoLEEoh · 04-13-2012, 12:42 PM

can u do a video of a 50 in 3rd gear all motor and a 50 in 3rd gear on the bottle to see the difference it makes?

Crux · 04-13-2012, 01:05 PM

That's a really clean setup! I like it a lot. I've been figuring the pricing for my own kit, but a shop recently quoted me at $750 for install

I don't think the DIY approach will work for me, I'm not inept when it comes to mechanics, but a toasted motor isn't worth the saved cash in the long run.

fuct · 04-13-2012, 01:27 PM

Quote:

Originally Posted by One_Quick_Z

Get this thread back on track dont bash the wood block...

DAN

you are very right... back to where we put the bubble gum and duct tape....

jkjk

Juruki · 04-13-2012, 01:34 PM

Quote:

Originally Posted by whoLEEoh

can u do a video of a 50 in 3rd gear all motor and a 50 in 3rd gear on the bottle to see the difference it makes?

Would really love to see this

One_Quick_Z · 04-13-2012, 02:14 PM

dan

V8Killer · 04-13-2012, 02:46 PM

Quote:

Originally Posted by whoLEEoh

can u do a video of a 50 in 3rd gear all motor and a 50 in 3rd gear on the bottle to see the difference it makes?

I don't see a reason why I can't? I won't spray though until after the tune.

V8Killer · 04-13-2012, 02:59 PM

Having some issues with the blow tube being short will post later tonight our fix.

BAHUMAT2JZ · 04-13-2012, 04:43 PM

Don't be afraid to DIY. The zex and the dynotune comes with good instruction. Hardest part of the installation is figuring out where you want to mount everything.

NeverBoneStck · 04-13-2012, 06:26 PM

Quote:

Originally Posted by V8Killer

Having some issues with the blow tube being short will post later tonight our fix.

You have to attach a rubber hose to it .. They should make them longer ..

valpozguy · 04-13-2012, 06:48 PM

I'm doing the same kit on my car here so here is where I mounted my bottle

2004YZFR1 · 04-13-2012, 07:07 PM

Good luck with your system! I didn't know that it cost over a g to go with laughing gas. I'm interested in how it turns out also.

V8Killer · 04-13-2012, 08:28 PM

Quote:

Originally Posted by 2004YZFR1

Good luck with your system! I didn't know that it cost over a g to go with laughing gas. I'm interested in how it turns out also.

The kit itself, is just above 700. You can piece a kit for cheaper but I wanted it all the same. Also adding in the other items is what bumped the cost up, I just wanted to be safe and secure when doing this.

V8Killer · 04-13-2012, 08:39 PM

Okay guys we finally finished. The blow down tube did become an issue but I ended up getting some copper tubing and everything is a go now. The new switch that I installed is for the bottle heater. Any questions feel free to ask. Thank you all for the positive support. Question to those of you out there that are running nitrous though. I know I have asked several of you about upgrading the spark plugs. I have yet to install them b/c well will our cars run fine on them even though I am not spraying all the time? The research that I have done on our plugs is they are pretty cold already. Input is greatly appreciated.

04-13-2012, 12:14 PM	#17 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	Get this thread back on track dont bash the wood block... DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

04-13-2012, 12:42 PM	#18 (permalink)
whoLEEoh Premium Member Join Date: Oct 2010 Location: Miami,FL Posts: 647 Drives: 2010 370z NISMO Rep Power: 15	can u do a video of a 50 in 3rd gear all motor and a 50 in 3rd gear on the bottle to see the difference it makes? __________________ 2013 Boss 302

04-13-2012, 02:14 PM	#22 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	dan __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

04-13-2012, 02:59 PM	#24 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Having some issues with the blow tube being short will post later tonight our fix. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-13-2012, 06:48 PM	#27 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	I'm doing the same kit on my car here so here is where I mounted my bottle Last edited by valpozguy; 04-13-2012 at 07:44 PM.

04-13-2012, 01:05 PM	#19 (permalink)
Crux Enthusiast Member Join Date: Mar 2012 Location: Maryland Posts: 253 Drives: 09 370z 7AT Rep Power: 13	That's a really clean setup! I like it a lot. I've been figuring the pricing for my own kit, but a shop recently quoted me at $750 for install I don't think the DIY approach will work for me, I'm not inept when it comes to mechanics, but a toasted motor isn't worth the saved cash in the long run.

04-13-2012, 04:43 PM	#25 (permalink)
BAHUMAT2JZ Base Member Join Date: Dec 2009 Location: AL Posts: 78 Drives: MB blue 370Z Rep Power: 15	Don't be afraid to DIY. The zex and the dynotune comes with good instruction. Hardest part of the installation is figuring out where you want to mount everything.

04-13-2012, 07:07 PM	#28 (permalink)
2004YZFR1 Enthusiast Member Join Date: Apr 2010 Location: Las Vegas Nevada Posts: 308 Drives: 09 370Z yellow,auto Rep Power: 15	Good luck with your system! I didn't know that it cost over a g to go with laughing gas. I'm interested in how it turns out also. __________________ K & N Filters \| HPS silicone air intakes\| Fast Intentions CBE with 18" resonators \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single shot for the weekend	DJackie	Photography	5	01-29-2012 07:28 AM
Is this tire shot?	370ZBG	Wheels & Tires	20	04-13-2011 06:43 PM
SHOT in the DARK	ZYUL8R	Wanted	3	10-20-2010 05:07 PM
The single Z shot	theDreamer	Nissan 370Z Photos / Spyshots / Video / Media Gallery	88	01-30-2010 02:12 AM
probably a shot in the dark...	Richie	Nissan 370Z General Discussions	0	11-25-2009 11:15 AM