Blackonorange's STS Turbo Build!! - Done by Speedtech Saskatoon

Staples · 04-01-2012, 11:19 PM

Quote:

Originally Posted by blackonorange

Eventually yes buy a clutch and meth injection is next

Good idea, enjoy / get use to the added power.

Speedy · 04-02-2012, 07:11 PM

Mustang dynos do read lower than a Dynojet...I'd bet your car is 420RWHP on a Dynojet.

Mr.Squeeze · 04-02-2012, 07:15 PM

Quote:

Originally Posted by Speedy

Mustang dynos do read lower than a Dynojet...I'd bet your car is 420RWHP on a Dynojet.

Not all mustang dynos read lower it depends on how its's calibrated. I have seen a high reading mustang dyno.

Speedy · 04-02-2012, 07:30 PM

If you say so. I've never seen one read higher...ever.

blackonorange · 04-02-2012, 08:30 PM

Quote:

Originally Posted by Speedy

If you say so. I've never seen one read higher...ever.

Yea I've never seen one either all I know is it pulls alot harder and longer on 380hp then it did on 380hp on the dynojet

esfourteen · 04-05-2012, 09:33 AM

Quote:

Originally Posted by Speedy

If you say so. I've never seen one read higher...ever.

not to derail the thread, but theres a mustang dyno near me that reads higher than dynojets, stock Z's putting down near 300whp, 340+ with bolt ons.

Mr.Squeeze · 04-05-2012, 01:16 PM

Quote:

Originally Posted by Speedy

If you say so. I've never seen one read higher...ever.

The thing with mustang dyno's is it depends on how the operator calibrates the dyno. I know of two in the North East that read high.

Dyno Jet's are different there calibrated from the factory.

blackonorange · 04-02-2012, 08:44 PM

Also it blows my clutch off in 3rd / 4th gear where as before it didn't at all

Speedy · 04-02-2012, 09:45 PM

I'm sticking by my earlier statement.....I'm betting 420 to the wheels.

Niztalgic · 04-02-2012, 09:47 PM

Probably so, mine came in at 367 on a mustang and 404 on a dyno jet

blackonorange · 04-02-2012, 10:06 PM

Ima try and get back on the Dyno jet some time I gotta save some cash now tho for a clutch

tower74 · 04-02-2012, 10:25 PM

Quote:

Originally Posted by blackonorange

Ima try and get back on the Dyno jet some time I gotta save some cash now tho for a clutch

And the bill gets higher for mods.....but it's well worth it!!!

Mr.Squeeze · 04-02-2012, 10:52 PM

Most of them do read low, I use to think the same thing tell I saw Performance Motorsports Mustang dyno results.I have seen dyno's of NA z over 340WHP on that dyno I have never seen a z do that on any dyno.

Either way this one doesnt seem like it's giving out high numbers.Those numbers dont seem high.

Mr.Squeeze · 04-05-2012, 07:43 AM

^^^^^^^^^^^^ Great review

I am in the process of going turbo my self ,and decided on Stage 3 GTM.

It came down to 4 kits GTM Greddy STS and Boosted performance Mid Mount kit that's coming out later this year.

I do think the STS is a good kit a lot of 350z guys have it.

Dzel · 04-05-2012, 08:14 AM

Hopefully with your clutch you'll pull better numbers.

04-02-2012, 09:47 PM	#10 (permalink)
Niztalgic Base Member Join Date: Jan 2012 Location: Mckinney TX Age: 43 Posts: 43 Drives: 10 370z nismo prl Rep Power: 15	Probably so, mine came in at 367 on a mustang and 404 on a dyno jet __________________ Hks hi pwr cbe - z1 cats - gtm stg1 sc - hks spark plugs - innovative afr gauge - defi boost gauge - Jwt oil pan spacer - 25 row oil cooler w/ spal fan and vented fender liner - z1 silicone hoses - uprev - specialty z clutch - 180 custom - VLEDS -ISS 20" complex 5 20" 275/325. Powertrix Coilovers

04-02-2012, 10:52 PM	#13 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20154	Most of them do read low, I use to think the same thing tell I saw Performance Motorsports Mustang dyno results.I have seen dyno's of NA z over 340WHP on that dyno I have never seen a z do that on any dyno. Either way this one doesnt seem like it's giving out high numbers.Those numbers dont seem high. __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

04-05-2012, 07:43 AM	#14 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20154	^^^^^^^^^^^^ Great review I am in the process of going turbo my self ,and decided on Stage 3 GTM. It came down to 4 kits GTM Greddy STS and Boosted performance Mid Mount kit that's coming out later this year. I do think the STS is a good kit a lot of 350z guys have it. __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

04-05-2012, 08:14 AM	#15 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	Hopefully with your clutch you'll pull better numbers. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Mounted Turbo (scratch build)	jnaut	Forced Induction	182	12-06-2012 10:20 AM
Twin Turbo Build	LafitteZ	40th Anniversary 370Z	42	10-05-2011 09:58 AM
AAM Competition : Double Z34 Twin Turbo Build	Jon@AAMComp	Forced Induction	60	01-17-2011 11:47 PM
TITAN's Twin Turbo build Done!!!!!!	kenbains12	Forced Induction	49	06-18-2010 07:32 AM

04-02-2012, 07:11 PM	#2 (permalink)
Speedy Enthusiast Member Join Date: Jan 2012 Location: TN Posts: 390 Drives: check my signature Rep Power: 15	Mustang dynos do read lower than a Dynojet...I'd bet your car is 420RWHP on a Dynojet.

04-02-2012, 07:30 PM	#4 (permalink)
Speedy Enthusiast Member Join Date: Jan 2012 Location: TN Posts: 390 Drives: check my signature Rep Power: 15	If you say so. I've never seen one read higher...ever.

04-02-2012, 08:44 PM	#8 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 17	Also it blows my clutch off in 3rd / 4th gear where as before it didn't at all

04-02-2012, 09:45 PM	#9 (permalink)
Speedy Enthusiast Member Join Date: Jan 2012 Location: TN Posts: 390 Drives: check my signature Rep Power: 15	I'm sticking by my earlier statement.....I'm betting 420 to the wheels.

04-02-2012, 10:06 PM	#11 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 17	Ima try and get back on the Dyno jet some time I gotta save some cash now tho for a clutch

***Blackonorange's STS Turbo Build!! - Done by Speedtech Saskatoon***

Blackonorange's STS Turbo Build!! - Done by Speedtech Saskatoon