Nitrous Build

NeverBoneStck · 02-12-2012, 07:11 PM

Quote:

Originally Posted by roplusbee

That's a nice touch. Just don't spray someone as they pass by, lol!

Funny Guy !!!!

NeverBoneStck · 02-12-2012, 07:19 PM

Got around to running the N20 and Meth SS lines.. What a Biatch !!!! Trying to find a way to run these was not fun .. The meth lines by my Art Pipes will be wrapped and attached to the body . N20 line is going up into the engine bay and HKS one step colder plugs .. Hacked into the rubber grommet in the trunk and sealed it with some 3 M weather seal .Almost done .....

roplusbee · 02-12-2012, 08:22 PM

Props go to you man............you are doin it up right. No half heartedness here!

gbrettin · 02-13-2012, 04:11 PM

Awesome pics! Keep 'em going.

wdkwang · 02-20-2012, 01:46 AM

You almost had me? You never had me - you never had your car... Granny shiftin' not double clutchin' like you should. You're lucky that hundred shot of NOS didn't blow the welds on the intake! You almost had me?

Now, me and the mad scientist got to rip apart the block... and replace the piston rings you fried.

Ask any racer. Any real racer. It don't matter if you win by an inch or a mile. Winning's winning.

edub370 · 02-20-2012, 08:41 AM

slightly off topic, but where did you get your 3 gauge pillar mount?

NeverBoneStck · 02-20-2012, 09:26 AM

It's a universal glow shift that I molded ...

Three7D · 02-23-2012, 08:49 PM

Props for clean DIY. Can't wait to see how it all turns out.

Is your motor stock as far as internals and what not? Is a 150 shot pushing it for are engines? Thanks and keep the pics coming...

valpozguy · 02-24-2012, 08:06 PM

Subscribed

AggieAv8r · 03-11-2012, 07:56 PM

How's this coming along?

V8Killer · 03-21-2012, 05:27 PM

Looking for an update from the op

Nixlimited · 03-21-2012, 06:59 PM

Kaboom?

NeverBoneStck · 03-21-2012, 08:36 PM

No boom .. Been waiting on some engine parts to show up and will be able to start working on it again tho weekend ..

V8Killer · 03-21-2012, 10:41 PM

Okay cool, thanks for the update glad to hear you didn't go kaboom. I will be doing a 75 shot here shortly.

V8Killer · 04-05-2012, 05:48 PM

Quote:

Originally Posted by NeverBoneStck

Got around to running the N20 and Meth SS lines.. What a Biatch !!!! Trying to find a way to run these was not fun .. The meth lines by my Art Pipes will be wrapped and attached to the body . N20 line is going up into the engine bay and HKS one step colder plugs .. Hacked into the rubber grommet in the trunk and sealed it with some 3 M weather seal .Almost done .....

OP what is the part number for those spark plugs? I am about to begin my build in a couple days.

02-12-2012, 08:22 PM	#48 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Props go to you man............you are doin it up right. No half heartedness here! __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

02-20-2012, 01:46 AM	#50 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	You almost had me? You never had me - you never had your car... Granny shiftin' not double clutchin' like you should. You're lucky that hundred shot of NOS didn't blow the welds on the intake! You almost had me? Now, me and the mad scientist got to rip apart the block... and replace the piston rings you fried. Ask any racer. Any real racer. It don't matter if you win by an inch or a mile. Winning's winning. __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

02-20-2012, 08:41 AM	#51 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	slightly off topic, but where did you get your 3 gauge pillar mount? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

02-20-2012, 09:26 AM	#52 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	It's a universal glow shift that I molded ... __________________ Juiced! That is all you need to know !!

02-23-2012, 08:49 PM	#53 (permalink)
Three7D Base Member Join Date: Sep 2010 Location: NorCal 707 Posts: 174 Drives: to slow Rep Power: 14	Props for clean DIY. Can't wait to see how it all turns out. Is your motor stock as far as internals and what not? Is a 150 shot pushing it for are engines? Thanks and keep the pics coming... __________________ 2010 Mag. Black Base+Sports V-LEDs Amuse Vestito (in a large box in my garage) Volk SF Challenge Gold/Phantom Ed. 10mm ichiba v2 F.I. CF+18" res. + F.I. RTP's

02-13-2012, 04:11 PM	#49 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,238 Drives: Tricycle Rep Power: 542172	Awesome pics! Keep 'em going.

02-24-2012, 08:06 PM	#54 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	Subscribed

03-11-2012, 07:56 PM	#55 (permalink)
AggieAv8r Base Member Join Date: Jun 2011 Location: Oklahoma Posts: 16 Drives: 09 BO G37S 6MT Rep Power: 13	How's this coming along? __________________ 09 G37S 6MT // EIBACH // VOSSEN // INVIDIA GEMINI // TAKEDA // MOTORDYNE // SPC // UPREV // 4.08 GEARS

03-21-2012, 05:27 PM	#56 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Looking for an update from the op __________________ "Punch" Too much to list and a baby shot of nitrous....

03-21-2012, 06:59 PM	#57 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 25	Kaboom? __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

03-21-2012, 08:36 PM	#58 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	No boom .. Been waiting on some engine parts to show up and will be able to start working on it again tho weekend .. __________________ Juiced! That is all you need to know !!

03-21-2012, 10:41 PM	#59 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Okay cool, thanks for the update glad to hear you didn't go kaboom. I will be doing a 75 shot here shortly. __________________ "Punch" Too much to list and a baby shot of nitrous....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nitrous	tyler20c	Intake/Exhaust	20	12-18-2012 07:43 PM
nitrous?	Snakes709	Forced Induction	67	07-26-2011 10:34 AM
Nitrous	oreoleo	Forced Induction	5	08-30-2010 08:52 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM