Finally got my Stillen SC done and tuned.

Neo187H · 12-21-2011, 07:02 PM

I bought the kit used way back in September and have had quite the time getting it running 100% but it's finally there so here is my quick build thread to show another finished Stillen build.

Parts:
Motordyne ART pipes
Ark type 2 cat back exhaust
Upgraded GTM MAFs
928 motorsports impeller
Stillen 9 PSI pulley
Injector Dynamics 725cc injectors.
DeatschWerks 300LPH fuel pump

With this combination of parts the way the Stillen SC is set up this was maxing out the mass airflow sensors at right about 7100RPM and the GTM sensors solved this issue (Big thanks to GTM for dealing with my incessant calling asking where they were). And on to the good stuff

The tuning was done at Synapse Turbo, a local import shop that has a very good reputation though no experience with Nissans or UpRev.

ANMVQ · 12-27-2011, 08:43 AM

Good numbers man, Having my Stillen SC installed in the next week.

Mr.Squeeze · 12-27-2011, 03:37 PM

Conragts on the set up what kind of dyno is this seems on the low side.Also how many pounds of boost are you seeing. I see something in the screen on the top that says
4WD.

Neo187H · 12-27-2011, 04:03 PM

Quote:

Originally Posted by Mr.Squeeze

Conragts on the set up what kind of dyno is this seems on the low side.Also how many pounds of boost are you seeing. I see something in the screen on the top that says
4WD.

It's a dynapack hub dyno which does seem a bit low but from everything I have read this shop has an extremly low reading dyno. Not that I have any clue how accurate that hype is. I'm hoping to get the car dynoed again at a different shop next week just so I can see for myself.

The car is hitting just about 10PSI at redline.

ANMVQ · 12-27-2011, 04:06 PM

Quote:

Originally Posted by Mr.Squeeze

Conragts on the set up what kind of dyno is this seems on the low side.Also how many pounds of boost are you seeing. I see something in the screen on the top that says
4WD.

Did not look that low to me. hope I make that on 8 PSI.

12-21-2011, 07:02 PM	#1 (permalink)
Neo187H Enthusiast Member Join Date: Jan 2009 Location: Albany, NY Posts: 302 Drives: PW 370Z Rep Power: 16	Finally got my Stillen SC done and tuned. I bought the kit used way back in September and have had quite the time getting it running 100% but it's finally there so here is my quick build thread to show another finished Stillen build. Parts: Motordyne ART pipes Ark type 2 cat back exhaust Upgraded GTM MAFs 928 motorsports impeller Stillen 9 PSI pulley Injector Dynamics 725cc injectors. DeatschWerks 300LPH fuel pump With this combination of parts the way the Stillen SC is set up this was maxing out the mass airflow sensors at right about 7100RPM and the GTM sensors solved this issue (Big thanks to GTM for dealing with my incessant calling asking where they were). And on to the good stuff The tuning was done at Synapse Turbo, a local import shop that has a very good reputation though no experience with Nissans or UpRev. Last edited by Neo187H; 12-21-2011 at 07:06 PM.

12-27-2011, 08:43 AM	#2 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Good numbers man, Having my Stillen SC installed in the next week. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-27-2011, 03:37 PM	#3 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20152	Conragts on the set up what kind of dyno is this seems on the low side.Also how many pounds of boost are you seeing. I see something in the screen on the top that says 4WD. __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)	AK370Z	DIY Section (Do-It-Yourself)	254	02-14-2023 07:08 PM
Finally got tuned!!	Elysium	Forced Induction	29	08-12-2011 07:37 AM
2010 7AT Uprev Tuned @ Stillen - 10.22.10	Fly1 Motorsports	Tuning	15	11-01-2010 11:43 AM
article about Stillen tuned cars with pictures	Lemers	Nissan 370Z General Discussions	17	05-20-2010 04:28 PM
Stillen header issue finally fixed	1uk32	Intake/Exhaust	14	10-04-2009 06:37 PM