|
After they were able to dive into it they finally found that the MAF is pegging out at 4.99v at about 7100RPM, something I worried might be happening after reading
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
11-28-2011, 12:38 PM
|
#38 (permalink) |
|
Enthusiast Member
Join Date: Jan 2009
Location: Albany, NY
Posts: 302
Drives: PW 370Z
Rep Power: 16  |
After they were able to dive into it they finally found that the MAF is pegging out at 4.99v at about 7100RPM, something I worried might be happening after reading about Mr. Squeeze saying his car was getting close to maxing it out with the upgrades he did to the Stillen kit as well. At this point I'm just waiting for Sam to get back to me about some questions I had with their upgraded MAF and will likely be ordering that shortly.
So for futur reference, on a Stillen SC kit Motordyne ART pipes, 9psi pulley and the 928 motorsports impeller will have 725cc injectors running at close to 80% duty cycle and max out the stock MAF at around 7000RPM Last edited by Neo187H; 11-28-2011 at 12:40 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Road Fuel vs. Racing Fuel: F1 Comparison | PaulZ370 | Nissan 370Z General Discussions | 35 | 08-04-2011 10:02 AM |
| Fuel Pressure? | Rooskey | Nissan 370Z General Discussions | 0 | 07-22-2010 07:33 PM |
| Regulated Fuel Pressure | Rooskey | Tuning | 0 | 07-21-2010 11:07 PM |
| 50-75% improved fuel economy news story... 'supercritical fuel inejctors' | travisjb | Engine & Drivetrain | 4 | 05-21-2010 11:54 AM |
| Fuel Filler Tube Coating Flaking Off Into Fuel Tank | SoCal 370Z | Nissan 370Z General Discussions | 12 | 02-02-2010 10:37 AM |
5Likes
Threaded Mode
