Nissan 370Z Forum - Baker Tuning: 2009 370Z with GTM Stage 2 TT Turn Key

Page 4 of 11

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Baker Tuning: 2009 370Z with GTM Stage 2 TT Turn Key (http://www.the370z.com/forced-induction/40310-baker-tuning-2009-370z-gtm-stage-2-tt-turn-key.html)

JB-370z

08-08-2011 10:37 AM

Quote:

Originally Posted by Ron (Post 1250315)

It would be good to monitor how ur motor is running. A wideband A/F gauge will tell you many things besides the actual fuel ratio. You can check for lean spots through out rpm range and it could give indication if you are knocking. I personally would not go FI without an A/F gauge.

How about EVC-S and Innovative Wideband? They can be had for about $550 both.

EVC-6 and AFK-2 FTW! Boost, A/F and knock all covered. And if you want to go the extra mile Camp-2. I have all of these but the AFK-2 but that will be my next thing I will buy. I will get them molded into the headliner :happydance:

DIGItonium

08-08-2011 12:21 PM

I'll probably save this for Phase 2 :) Eagerly waiting for updates...

Ron	08-08-2011 12:28 PM

I'll drop by tomorrow and take some pics :tup:

JB-370z

08-08-2011 12:29 PM

Its not cheap to get the AFK2, EVC-6 and Camp-2 fully implemented in. Prolly say around 3k installed etc. Def not the 500 like Rons idea entails but its the best way to be covered on all bases and some.

JB-370z

08-08-2011 12:30 PM

Quote:

Originally Posted by Ron (Post 1250683)

I'll drop by tomorrow and take some pics :tup:

You might be able so see the where I kicked his door :happydance:

theDreamer

08-08-2011 12:32 PM

Quote:

Originally Posted by JB-370z (Post 1250691)

You might be able so see the where I kicked his door :happydance:

So you were just kicking everything back there huh.

JB-370z

08-08-2011 12:39 PM

Quote:

Originally Posted by theDreamer (Post 1250695)

So you were just kicking everything back there huh.

Im back there kicking your s14 too !!!

http://i29.photobucket.com/albums/c2...E/a132c19d.jpg

DIGItonium

08-08-2011 05:24 PM

Ninja Cat saves the day!!! :icon17:

http://www.the370z.com/attachment.ph...1&d=1312842221

DIGItonium

08-11-2011 04:52 PM

Got some MMS photos from Paul today. They're basically teaser photos of the work in progress. Check out the 2nd post for some TINY photos, but you can see in the background the engine has been removed!

DIGItonium

08-19-2011 02:30 PM

Post #1 updated. Paul Morgan has been sending me teaser photos of the install progress. The latest photo shows the completed installation, and the car should be getting tuned and tested sometime today. Gauges will be installed on Monday.

theDreamer

08-19-2011 02:31 PM

Looks like I might need to stop by tonight for some 'test' driving. :p

JB-370z

08-19-2011 09:22 PM

DIGItonium

08-20-2011 12:06 AM

Sweet pictures! So the heat shields come with the kit as well?

Who's shortblock is that? What's being done with it?

JB-370z

08-20-2011 09:40 AM

That is Mr. Bakers. Its going on his 370z TT, the white one with the racing project Mu BBK in the back lot. I am tempted to put that mean machine in my car. However, I need a new clutch before I up the boost. I am currently rebuilding a 240sx at the same time. Thats why I have slowed down on modding the Z.

It is amazing how well put together that GTM block is. I will have one soon, no doubt.

The white Z in this video is where the GTM block will find its home.

http://i29.photobucket.com/albums/c2...h_af020b21.jpg

DIGItonium

08-20-2011 11:01 AM

That 240 looks sweet! Have you looked up SR20VET? Interesting motor. Sounds like a fun project. It was a vehicle to consider getting back in 2000 and have my dad's friend drop in the SR20, but he didn't have time to work on custom jobs.

Hopefully the 370Z will be my only project haha. The rest goes to the house.

All times are GMT -5. The time now is 09:11 AM.

Page 4 of 11

« First

Last »

Show 40 post(s) from this thread on one page