Is it that hard to....

Dembflyr · 07-01-2011, 11:14 AM

Quote:

Originally Posted by edub370

theoratically, other than the flanges and piping/oil line lengths needed the fab shouldn't be anything too insane

Unless you are a master at cutting and welding the charge and intake piping I don't see how you'd save a penny.

I can only speak for the GTM kit as that is what I have installed. There is very little room once you get the manifolds and turbos installed. I can't imagine having to bend and cut and weld all of the piping to fit. But I am no fabricator. I just turn wrenches once in a while.

Now, if you want to do this for no other reason then to say that you fabbed it yourself then I'd love to see what you come up with.

nvrbacardi · 07-01-2011, 01:22 PM

Believe me that I know nothing about welding or cutting, but still I wasn't thinking of doing that myself. I figured that a professional shop could make the piping and install for me.

toner123 · 07-01-2011, 01:44 PM

Quote:

Originally Posted by nvrbacardi

So I was thinking the exact same thing. I wanted to buy all the parts and the go to a shop to do all the piping and tuning, but the thing is that it is going to be a lot cheaper since I can get things for Garret at pretty lower price. But if other issues will arise I guess the savings are not worth it.....

Another option is call sam and see if he will sell you a kit excluding the turbos if you think you can get the turbos cheeper your self. I am sure he would do it.

nvrbacardi · 07-01-2011, 01:47 PM

I can give it a try. That will definitely be the best approach for me.

edub370 · 07-01-2011, 02:19 PM

thats not a bad idea. i mean anything small (say td04,5,6 housing) should work on there. we dont need to make much boost with these things

07-01-2011, 02:19 PM	#20 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 22	thats not a bad idea. i mean anything small (say td04,5,6 housing) should work on there. we dont need to make much boost with these things __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New here and looking hard	samb03	Nissan 370Z General Discussions	17	11-10-2010 11:35 PM
The better tires going to be hard to get?	Hi-Step'n370Z	Wheels & Tires	12	01-28-2010 01:09 PM
Is the 370Z as hard as the 350...	PapoZalsa	Nissan 370Z General Discussions	14	12-03-2009 04:58 PM
Who drives their 370 hard often?	370zdub	Nissan 370Z General Discussions	58	09-28-2009 08:09 PM
Removable Hard Top	Whitey#1	Nissan 370Z General Discussions	9	08-10-2009 10:45 PM

07-01-2011, 01:22 PM	#17 (permalink)
nvrbacardi Base Member Join Date: Sep 2010 Location: Puerto Rico Posts: 25 Drives: Nissan 370Z Red M6 Rep Power: 16	Believe me that I know nothing about welding or cutting, but still I wasn't thinking of doing that myself. I figured that a professional shop could make the piping and install for me.

07-01-2011, 01:47 PM	#19 (permalink)
nvrbacardi Base Member Join Date: Sep 2010 Location: Puerto Rico Posts: 25 Drives: Nissan 370Z Red M6 Rep Power: 16	I can give it a try. That will definitely be the best approach for me.