Hahaha...that way you can run straight ethanol too!! :roflpuke2:

Update 10.06.2015:

The engine block is revised and cleaned and the cylinders are machined! :tup:
All parts are ready for installation

New information will follow ...

Stay tuned

http://www.the370z.com/attachment.ph...1&d=1433953925

http://www.the370z.com/attachment.ph...1&d=1433953943

http://www.the370z.com/attachment.ph...1&d=1433953943

That's where I wanted to place an air temp sensor, we put one right before the Stillen manifold. Ugh

Should put one on both sides as someone suggested. PLX can handle multiple sensors.

Everything will end someday .....

Even my Z-Project (hopefully).....
1 year waiting period should then be over!

Beginning of September, the first rollout will start
(Please keep your fingers crossed :tup:)
And if all goes well, I will participate in this Event!

September the 27th

Playing with the "BIG-BOYZ" :driving:

http://www.scc500.de/wp-content/uplo...1898290231.png

http://www.the370z.com/attachment.ph...1&d=1438025409

"preview"

Some BAD NEWS!

My tuner closes his business!

QAS Quantumautosport

News on the Website:

"We thank our customers and partners of Quantum Autosport for 12 years of successful cooperation!

The Quantum Trading GmbH by shareholder resolution decided their wooing business to the end of the set 07.31.2015 "

http://www.quantumautosport.com

My "Z" are still with him.
This reminds me a bit of the GTM- Story...:stirthepot:

Crap! :shakes head: So now what are you going to do? :confused:

Sorry to hear this, hope it all works out.

Thanks Guys :tiphat:

At the moment I have no information how to proceed.
They assured me that everything will be done until September 1 !?
(Reply 3 weeks ago)

Hope the "luck" stays with me :bowdown::bowdown:

Oh crap! I hope they take care of you, good luck!

Did you get your car back?


Sent from my iPhone using Tapatalk

Wait wait ,what what the hell is got on!! The closed the doors with your car still there . They didn't give you a heads up , WOW all if can say is WOW. So sorry man

Damn dude that blows fat donkey ****! Hopefully they stay true to their promise and finish your car!

Is there any other good shops around you can tow the Z too?

At the moment we stay on Holliday
So i have no idea, what's going on in the Shop.....
31.08 we are back
I will Report, when we are back in town

Greetings

E-Mail today from my Tuner: (A first sign of life from my "Z"!)

The engine is assembled and running as of today ...
Starting next week, the software settings are made now....:stirthepot:

Please wish me some luck that everything comes to an end!

Greetings from the other side of the World :tup::tup::tup::tup:
Ivo

Keeping my fingers and toes crossed for you. :tup:

Is it at the same shop that closed on you?


Sent from my iPhone using Tapatalk

Hoping for you Ivo!!

No!

The "Z-Lady" currently stands at ICP, a partner of QAS!

We'll see what happens now ...
I still believe in the goodness and hope the "Z" is right back at me!

BTW: Thanks Guys, for for the nice words! :tup::tup::tup::tup:

Hey Guys! :happydance:

In about 2 days, my "Z" should be with me again

The record of one year is then broken

The car is running, but still set not correctly....
In 2 weeks, I'll know more ??

Please keep your fingers crossed!

Thanks :tup::tup::tup::tup:

Greetings from the other side of the earth
Ivo

Hope your are good to go.

The missing lady has today now definitely with me! :tup:

Now it goes to the last setting in this year!
It will soon be winter in Switzerland ...:stirthepot:

I will report!

Many thanks to you for the encouraging words and sympathy!

Kind regards
Ivo

Excellent! What setting? Are you on a base map right now and need a final tune?

How much power did you make?


Sent from my iPhone using Tapatalk

Hi Guys!
The "Z" is still in the running-in procedure (450 miles / 720Km so far down)
Limited speed at 3500 rev / min and a maximum speed of 90 miles (140 km/h)

Next Tuesday, the software is set by Ecutek
I do not know if by then everything can be completed?

I will Report :tup:

Did you ever consider just going full blown turbo instead of SC? Just wondering. You've invested so much already.

Hey axmea

If I could,
I'd immediately (Fast Intentions)

But the problem is that we have extreme problems in Switzerland,
such to realize this Projekt and especially to officially examine (Swiss motor vehicle inspection and legal entry :stirthepot::stirthepot:)

We had six months needed to officially consider the STILLEN- Kit in Switzerland
And this has cost many thousands of dollars
This procedure took me extreme nervous
Although the kit with you, "Smog Legal CARB" was

So I'll stay with my registered Kit and optimize him

Greetings
Ivo

BTW: I LOVE THE FAST INTENTIONS KIT

http://www.the370z.com/attachment.ph...1&d=1443888994

You can not imagine how I have looked forward to these words...:bowdown:

The "Z" is back with all its modifications....(Long List)

It runs well so far and sounds like a race car :tup::tup:

In January 2016, we will process the next optimizations.
- Final tuning of the Software (very safe for now)
- A little more BOOOOOOOST
- etc...

Unfortunately, she soon goes into hibernation ...
But I will try, if the weather is nice,
to take some pictures and possibly videos

Stay tuned...

Greetings from Switzerland
Ivo

It was a long time coming. Hope you enjoy her a little before winter.

Great news brotha, enjoy her.

The first PIC in 2015

(after a long, long, very long Story.........)

http://www.the370z.com/attachment.ph...1&d=1444411346

http://www.the370z.com/attachment.ph...1&d=1444411346

http://www.the370z.com/attachment.ph...1&d=1444411346

http://www.the370z.com/attachment.ph...1&d=1444411346

http://www.the370z.com/attachment.ph...1&d=1444411660

http://www.the370z.com/attachment.ph...1&d=1444411714

BTW: Brand NEW EVO-R GT-Wing for sale
(It follows a new post on this sale!)

I have no chance to formally enter this rear spoiler with us here in Switzerland .... :stirthepot::stirthepot::stirthepot::stirthepot:

If anyone is interested, please contact me via PM!
I will offer a good Price incl. shipping to your Door :tup::tup::tup::tup:

Greetings
Ivo

Ok IVO YEA MAN! I hope the spoiler you are selling is the one in the pic, only thing I don't like :/

Were's the video MAN! Come one,

Bad *** looking Z! I love the look of the wing!

Nice dude!

love how the GT wing look! :yum: nice work dude!

Thank you Sir!
I'd like to assemble ....
But have unfortunately no chance here in Switzerland!

Damned laws that are worse here ... :shakes head:

damn bro... why????:shakes head:

Hey Guys

My "Z" now goes into Hibernation! :ugh2:

In March 2016, the boost pressure and other adjustments to the Ecutek software, will optimized!
The imperative for the optimization is the adjustment via "Speed Density"!

For all those who had no snow in the winter, a lot of fun with your projects! :tup::tup::tup::tup:

Greetings from Switzerland :tiphat:
Ivo

http://www.the370z.com/attachment.ph...1&d=1447955852

http://www.the370z.com/attachment.ph...1&d=1447955297

Hi guys!

A little update from me and my Project :tup:
(Unfortunately I did not have time earlier to edit this "crapy- Video")

After 5 years, I was in Sept. 2015 the first time live in a Dynorun there!
Unbelievable, but unfortunately true ...
My previous tuners have only ever sent me the Charts! :shakes head:
But now my tale of woe goes finally on the positive!

HK- Power from Germany

He is the Guy where his craft understands and me and my project, well served! :tup::tup::tup::tup:

HK-Power :: Home


Currently Facts (standard output without correction
and a very, very conservative ECU- Setting!):
New Hardware, as described :tup:

Boost pressure: 8.7 psi (at 7500 U/min)
Power: 480 HP (not WHP)
Torque: 540 NM (400 lbf ft)

And here is the first Dynorun: