GTM Stage 2 Supercharger Preliminary Testing Results

fuct · 07-15-2011, 08:33 AM

This might be a dumb question, but is there anything adverse to the geometry or handling when you move the engine slightly? As in using motor mounts? (assuming you are using them to adjust the loaction of the motor to clear certain parts)

SAM@GTM · 07-16-2011, 01:02 PM

Quote:

Originally Posted by fuct

This might be a dumb question, but is there anything adverse to the geometry or handling when you move the engine slightly? As in using motor mounts? (assuming you are using them to adjust the loaction of the motor to clear certain parts)

We are not moving or relocating the engine, Even if we wanted to do that we could not do it. not sure where you got this idea from .

We are implementing more compact and stronger engine mounts to gain more room and better clearance around the supercharger .

Also using urethane motor mounts is very common upgrade .

Sam

And here is a pic of the factory motor mount.

07-15-2011, 08:33 AM	#1 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	This might be a dumb question, but is there anything adverse to the geometry or handling when you move the engine slightly? As in using motor mounts? (assuming you are using them to adjust the loaction of the motor to clear certain parts) Last edited by fuct; 07-15-2011 at 09:12 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 04:50 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 03:42 AM
GTM supercharger stage 1 videos	Fezzik	Forced Induction	23	05-10-2011 11:34 AM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 10:59 AM