Im making 258 lbs of torque
My base line 224 lbs of torque with 264 rwhp (stock).
z

Thought I might chime in.....Best show on earth, IMHO!!!

cant wait till you get the C38-91..it'll be a beast!!

wow, perfect as it is now!!

C-38 - 91 STAGE 2 GTM. I just ran a 12.721 1/4 mile time this saturday at the track with bolt on's. ( in drag section) and it a 7 AT.
When I get the stage 2 it will go close to mid 11's, (11.5 to 11.6.)
Now crank it up to 10 lbs boost and who knows how fast it will go.
I hope that it can make 500 rwhp or more.
" soon to be a stock GTR's worst night mare."
We will just have to wait for Sam to get my SC shipped to me.

I just didnt like how the motor seemed to shiver right before letting off the throttle at about 1:20ish on the dyno pull, any comments.......maybe its just this afghani internet that im using .......but either way im a future customer SAM......just waiting on the bank account to say OK!

That wasn't the motor, but the whole car. It was probably from the straps on the Dyno. They provide a lot of pressure to make sure the car doesn't move off the rollers.

I don't know.....the motor seemed to shake back and forth and nothing else

Doesn't every motor do that? Hence the flex pipe on the exhaust?
Given the cylinder positions and motor orientation Honda does front to back, Ours do side to side no?

Yes they do all torque under power transfer....just miight be my internet and a bad gap between video and audio but it seems to start shaking before he even lets off the throttle......iono probably my bad internet out here

Also could be the soft motor mounts.

CARB Cert Update PLease
 

So someone asked about Carb Cert and there was no reply to it.
Can someone at GTM please respond to what the situation is with that as well as a time-frame for getting certification?

also the gtm literature only states carb pending for the stage zero kit. what about the other stage kits?

And will the same restrictions apply for carb certified kits as the stillen? ie. the tune that the kit comes with is locked and cannot be changed? or am i confused about the stillen kit?

I'm about to purchase a new out of state nismo but that requires smog check to register so i'm assuming i will fall into the every two year smog requirement vs not having to smog for 6 years if vehicle is purchased in ca.
This may be a big deal for me if that is the case.

thanks for any info.

We are working on getting CARB approval for our Stage 0 kit. We will not be seeking CARB approval for the Stage 1 and 2 kits.

CARB Certification takes time and quite frankly, we don't know how much longer it is going to take. We will be announcing it once we have it though.

The Stage 0 kit (aka the CARB kit) will have a CARB specific tune and will be locked in the sense that the maps cannot be modified by anyone else.

Great! I always thought my kit was the carb kit

Is the tune the only difference between the stage 0 and stage 1 kit?