Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Forced Induction Finished Builds (http://www.the370z.com/forced-induction/21711-forced-induction-finished-builds.html)

Chuck33079 03-25-2019 01:37 PM

Quote:

Originally Posted by 370zbeast (Post 3837142)
AAM IN MARYLAND. Sorry almost done, hope to get it back in West Texas next week.

Make sure you take it to a qualified shop when you get it home. Don't just take it out and start romping on it. AAM has had a lot of major issues over the last few years, and the quality of their work has fallen through the floor.

370zbeast 03-26-2019 08:00 PM

Thanks I'll be careful.

370Z40thed 09-14-2019 08:31 PM

Greddy Twin turbo kit installation
 
Good evening everyone! I have a quick question! who has here installed the Greddy TT kit by themselves!? how long did it take? how hard was the process? I have mechanic experience but I'm just wanting answers before I take my car apart. thank you!

Spooler 09-14-2019 09:11 PM

Quote:

Originally Posted by 370Z40thed (Post 3878082)
Good evening everyone! I have a quick question! who has here installed the Greddy TT kit by themselves!? how long did it take? how hard was the process? I have mechanic experience but I'm just wanting answers before I take my car apart. thank you!

Phunk had one and installed it himself.

solidus 09-15-2019 09:34 AM

If you have mechanical experience shouldn't be a problem as long as you're comfy dropping the motor. Basically a header swap, then adding all the woosh accessories.

Martijn_b 01-18-2020 01:31 PM

Went on the dyno today: 622bhp and 691nm of torque (at the block). 11psi and AAM stg 2 kit on stock engine and 93 octane. Tune by Specialtyz.

Sent from my SM-G973F using Tapatalk

V1H 01-18-2020 02:59 PM

Quote:

Originally Posted by Martijn_b (Post 3901541)
Went on the dyno today: 622bhp and 691nm of torque (at the block). 11psi and AAM stg 2 kit on stock engine and 93 octane. Tune by Specialtyz.

Sent from my SM-G973F using Tapatalk



Wow, 11psi on stock block and no knock with ordinary dino juice? How?
Impressive!
I am limited to ~6psi due to knock with Shell VPower (98)


Sent from my iPhone using Tapatalk

sirnixalot 01-18-2020 03:16 PM

Quote:

Originally Posted by V1H (Post 3901567)
Wow, 11psi on stock block and no knock with ordinary dino juice? How?
Impressive!
I am limited to ~6psi due to knock with Shell VPower (98)


Sent from my iPhone using Tapatalk

You should find a different tuner. I'm runnnig 14psi on a much smaller turbine turbo on 92-93 (R+M)/2 octane which is 96 or 97 Ron (your 98 is 98 ron).

Martijn_b 01-18-2020 03:21 PM

Rene, can it be that you are running a lot of timing? I made a little over 500bhp on 6psi.

You should be easily able to push 10-11 psi and keep a safe margin.

Sent from my SM-G973F using Tapatalk

solidus 01-18-2020 06:23 PM

Quote:

Originally Posted by Martijn_b (Post 3901570)
Rene, can it be that you are running a lot of timing? I made a little over 500bhp on 6psi.

You should be easily able to push 10-11 psi and keep a safe margin.

Sent from my SM-G973F using Tapatalk

That guy didn't ingest the details of your post. If he did he would've recognized you were tuned by one of the best in the world via remote. Knowing that he would understand that Seb tunes with the interest of safety of the engine and longevity as well as optimal power for what you're working with.
Seb absolutely won't push the limits if he's not hands on with your car on the dyno.......I've tried.

redondoaveb 01-18-2020 08:45 PM

Quote:

Originally Posted by solidus (Post 3901609)
That guy didn't ingest the details of your post. If he did he would've recognized you were tuned by one of the best in the world via remote. Knowing that he would understand that Seb tunes with the interest of safety of the engine and longevity as well as optimal power for what you're working with.
Seb absolutely won't push the limits if he's not hands on with your car on the dyno.......I've tried.

Seb won't, even if it's in his hands unless you really push him to do it.

solidus 01-18-2020 09:02 PM

Quote:

Originally Posted by redondoaveb (Post 3901639)
Seb won't, even if it's in his hands unless you really push him to do it.

Lol!! Tell me about it. I've tried all kinds of Jedi tricks and Seb shut me down with logic. The tune may be soft but you know it's safe. And "Soft" is a matter of perspective between people who give a crap and people with 20k in reserve and a builder and block on standby.

redondoaveb 01-18-2020 09:05 PM

Quote:

Originally Posted by solidus (Post 3901645)
Lol!! Tell me about it. I've tried all kinds of Jedi tricks and Seb shut me down with logic. The tune may be soft but you know it's safe. And "Soft" is a matter of perspective between people who give a crap and people with 20k in reserve and a builder and block on standby.

Exactly. He explained it real simple for me. Is an extra 30whp worth needing a new motor.:rofl2:

Spooler 01-18-2020 10:10 PM

Quote:

Originally Posted by solidus (Post 3901645)
Lol!! Tell me about it. I've tried all kinds of Jedi tricks and Seb shut me down with logic. The tune may be soft but you know it's safe. And "Soft" is a matter of perspective between people who give a crap and people with 20k in reserve and a builder and block on standby.

Are you picking on me Al ?

solidus 01-19-2020 01:38 AM

Quote:

Originally Posted by Spooler (Post 3901663)
Are you picking on me Al ?

Lol! If I had 5 or 6 puppies laying around I could maybe rock 30psi just to see some sparks.


All times are GMT -5. The time now is 04:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2