Nissan 370Z Forum - Forced Induction Finished Builds

Page 42 of 59

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Forced Induction Finished Builds (http://www.the370z.com/forced-induction/21711-forced-induction-finished-builds.html)

jwick

07-12-2015 12:09 AM

Ecutek is that good?

jwick

07-12-2015 12:10 AM

I took a couple of out of towners for joy rides this morning. 90 deg so the turbo isn't spooling as good and I had no fuckin traction until 3rd.

Spooler

07-12-2015 12:11 AM

Quote:

Originally Posted by bullitt5897 (Post 3254249)

Surprisingly the car hooks! Did a few pulls today playing with ecutek traction control and man it is a beast!!! You work soooo much harder when you jump on it... Your slammed into the seat and your mind has to be 100% focus. While the whole Time the front is lifting and rear is squating making the steering really light and the whole time your thinking to your self "ok when are you going to step out on me?..."

Most fun car I have ever driven!!!

Yeah,..... Twilight Zone. Do you know what that is?

Hotrodz

07-12-2015 12:15 AM

^^ LOL :eek:

Spooler

07-12-2015 12:15 AM

Wanna see something really scary?

Hotrodz

07-12-2015 12:19 AM

That was one of the things we would say to the ladies in High School...

jwick

07-12-2015 12:35 AM

Quote:

Originally Posted by Hotrodz (Post 3254259)

That was one of the things we would say to the ladies in High School...

Figure in the real world you pulled out your penis:rofl2:

Hotrodz

07-12-2015 10:07 PM

LOL...you are talking really scary!:eek:

bullitt5897

07-13-2015 10:20 AM

Well I think i figured out my boost issue last night... It had to do with the original setup of the boost controller. Given that my car was a test mule for GTM my spring pressure was constantly being played with and changed around and is different then what was inputted into the Boost controller as the Base maximum pressure. I reset the controller and will be testing it out later today. I will update with my results.

G37Some

07-13-2015 08:48 PM

Quote:

Originally Posted by bullitt5897 (Post 3235052)

After further digging the springs seem fine. We are looking into other restraints and seeing as we are uncharted territory for this platform I am double checking were we may be running into stumbling blocks. As of right now we are running a double spring setup in our waste gates for 20-22psi... This should be good for about 38psi of boost... We are in no way maxing out the turbos and given that it is Father's Day the race gas shops in our area have all been closed this weekend... May have to wait later for the race gas run on c16. I will post up what we changed and any further updates.

Also this is an ecutek tuning platform.

Uprev vs ecutek...

can you elaborate on the changes you were able to make between ecutek & uprev? that is a huge increase, assuming no other increases in boost levels or anything

bullitt5897

07-13-2015 09:33 PM

It was VVEL tuning, c16 and velocity stack intakes

Masterbeatty

07-14-2015 07:57 AM

Quote:

Originally Posted by bullitt5897 (Post 3254249)

Video!!!!

bullitt5897

07-14-2015 01:57 PM

I have to wait for temps to cool down... I ran it yesterday and after about a dozen 3rd and 4th gear pulls the coolant went ape **** crazy... Thank you 90+* weather and crazy humidity! I mean I was doing pulls back to back... first 3rd then 4th then both and back to 3rd lol...

KaienZ34

07-14-2015 04:27 PM

Yeah my shoes have melted to sidewalk down here in south Louisiana.

jwick

07-14-2015 04:54 PM

Quote:

Originally Posted by KaienZ34 (Post 3256539)

Yeah my shoes have melted to sidewalk down here in south Louisiana.

I feel you there. H-town is brutal the last couple weeks. Only getting worse next week.

All times are GMT -5. The time now is 05:53 PM.

Page 42 of 59

« First

Last »

Show 40 post(s) from this thread on one page