Nissan 370Z Forum
Page 90 of 177 « First 40808889 90 9192100140 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   STILLEN 370Z Supercharger System - Announcement!!! (http://www.the370z.com/forced-induction/15836-stillen-370z-supercharger-system-announcement.html)

g37mobbin 08-13-2010 10:24 AM
Quote:
Originally Posted by RCZ (Post 673486)
ah, so I'm not so lucky after all.
why what happened?

RCZ 08-13-2010 10:32 AM
No, I mean it seems that kits working right is actually normal. So I'm not lucky, its just that some people on here are very unlucky.

g37mobbin 08-13-2010 10:48 AM
Quote:
Originally Posted by RCZ (Post 673499)
No, I mean it seems that kits working right is actually normal. So I'm not lucky, its just that some people on here are very unlucky.
sorry for the misinterpretation. yeah, mine is still there

tomnavone 08-13-2010 02:03 PM
Lets hear from all the people with the kits running properly instead of all these people whining about their kit not working:stirthepot:

GUTCH 08-13-2010 02:15 PM
Quote:
Originally Posted by tomnavone (Post 673918)
Lets hear from all the people with the kits running properly instead of all these people whining about their kit not working:stirthepot:
:iagree:

I could have sworn I said that a few posts ago.

Phimosis 08-13-2010 05:59 PM
Quote:
Originally Posted by willtangclan (Post 672866)
Anyone else with the Stillen sc encounter this problem?

The car ran perfect for about a thousand km. The engine light then came on and the car idles at 1K rpm. I took it back to my mechanic and the ecu threw a misfire code. I called Josh @ Stillen and they said it was a vacuum leak or one of vacuum lines might be kinked. My mechanic went through the install and made sure no lines were leaking or kinked. So he resetted the code and the car idled normal again. Now i drove it for another thousand km and the engine light is back on and the car is idleing at 1K again.

Any ideas?

Thanks guys

Maybe EGR hose is kinked? I took my car in for ac work and the guy commented that the short run of EGR hose is not a formed hose, but turns almost 90 degrees and was kinked shut.

NYBladeZ 08-13-2010 06:14 PM
Stillen states on their site that the kit leaves room for growth. Any more details available? Ex. what pullies are available and how hard are they to swap out?

m4a1mustang 08-13-2010 06:22 PM
Quote:
Originally Posted by NYBladeZ (Post 674263)
Stillen states on their site that the kit leaves room for growth. Any more details available? Ex. what pullies are available and how hard are they to swap out?
That's got to be the last thing on Stillen's mind right now... they're trying to get the base kit to work!

NYBladeZ 08-13-2010 06:48 PM
Well if they state it on their website they should have some sort of answer

m4a1mustang 08-13-2010 06:55 PM
Quote:
Originally Posted by NYBladeZ (Post 674297)
Well if they state it on their website they should have some sort of answer
Nothing ever goes as planned. :icon23:

weiboy718 08-13-2010 10:18 PM
Quote:
Originally Posted by tomnavone (Post 673918)
Lets hear from all the people with the kits running properly instead of all these people whining about their kit not working:stirthepot:
i'm coming up on my first initial blower oil change and so far car is still running very good.

g37mobbin 08-14-2010 01:15 AM
Quote:
Originally Posted by tomnavone (Post 673918)
Lets hear from all the people with the kits running properly instead of all these people whining about their kit not working:stirthepot:
you will only hear RCZ and Weiboy and Stillen's car that have had Success...the rest of us are in the same boat facing similar issues.

MMC Racing 08-14-2010 01:18 AM
Quote:
Originally Posted by g37mobbin (Post 674708)
you will only hear RCZ and Weiboy and Stillen's car that have had Success...the rest of us are in the same boat facing similar issues.
You are but a small percentage (90%) having problems.. ;)

LateralG'z 08-14-2010 04:10 AM
We are getting things running a lot better with my set-up now that Uprev has done some updates to my ROM, Hopefully will get it on the Dyno this afternoon if they can squeek us in. Will definitely have the car running good and finished soon.

g37mobbin 08-14-2010 11:07 AM
Quote:
Originally Posted by MMC Racing (Post 674714)
You are but a small percentage (90%) having problems.. ;)
LMAO small percentage huh


All times are GMT -5. The time now is 08:35 AM.
Page 90 of 177 « First 40808889 90 9192100140 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2