|
Hi, Top port should be vented, bottom is your reference pressure. You shouldn’t have more than one vent open per wastegate. Sounds like you got it figured out, but something
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-04-2024, 06:41 PM
|
#2 (permalink) |
|
Base Member
Join Date: Nov 2016
Location: Washington State
Posts: 69
Drives: 15 370z 6MT Nismo
Rep Power: 9  |
Hi,
Top port should be vented, bottom is your reference pressure. You shouldn’t have more than one vent open per wastegate. Sounds like you got it figured out, but something changed. Likely a line from your EBC to wastegates has ruptured, or possibly from your reference to EBC. If those are good, then you have a boost leak. Sounds like a simple fix, best of luck.
__________________
'15 370z Nismo Tech 6MT Magnetic Black, V2 BP Kit 6467 Unexploded Turbo | '06 350z Touring 6MT Carbon Silver |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| OB 2 ports will not work | Z eliminator | Engine & Drivetrain | 4 | 12-10-2021 07:26 AM |
| Installed USB ports in middle blank switch. | JustinP | Exterior & Interior | 9 | 04-29-2017 07:17 PM |
| Oil flter sandwich w/sensor and cooler ports | Spec Jay | Engine & Drivetrain | 6 | 03-07-2015 09:21 PM |
| Figuring out suspension | StealthZ | Track / Autocross / Drifting / Dragstrip | 9 | 04-17-2011 07:48 PM |
| Figuring Out Offset: Please Help? | Mazaki | Wheels & Tires | 3 | 04-24-2010 05:37 PM |
Threaded Mode
