Isayimandrew's Twin Turbo Build

isayimandrew · 01-19-2022, 09:39 AM

Just to give another update:

Still waiting on my motor to be done being built before Jotech can do the rest of the build.

The original plan back in August was to have a local shop do the motor build and assembly and to send CNC Werx the block to do the Cylinder Support System closed deck modifications. But, the original local shop was not communicating well and had a few other Jotech motors still in queue (including mine) so Jotech decided to get my motor back from them around the middle of October and let CNC Werx do both their closed deck modification as well as all the other machining for the motor build and assembly. After a few delays (thanks Covid), they were able to get the tooling needed for the head stud conversion and to start assembly soon.

Now that all the machining is done, they're in the middle of assembly where they've hit a snag on the original head studs we were going to use. They recommended that we go with the ARP 625+ head studs instead so Jotech is currently trying to source those (out of stock; again thanks Covid) so CNC Werx can finish their portion and get the motor back to Jotech.

Elmo370z · 01-19-2022, 06:33 PM

Quote:

Originally Posted by isayimandrew

Just to give another update:

Still waiting on my motor to be done being built before Jotech can do the rest of the build.

The original plan back in August was to have a local shop do the motor build and assembly and to send CNC Werx the block to do the Cylinder Support System closed deck modifications. But, the original local shop was not communicating well and had a few other Jotech motors still in queue (including mine) so Jotech decided to get my motor back from them around the middle of October and let CNC Werx do both their closed deck modification as well as all the other machining for the motor build and assembly. After a few delays (thanks Covid), they were able to get the tooling needed for the head stud conversion and to start assembly soon.

Now that all the machining is done, they're in the middle of assembly where they've hit a snag on the original head studs we were going to use. They recommended that we go with the ARP 625+ head studs instead so Jotech is currently trying to source those (out of stock; again thanks Covid) so CNC Werx can finish their portion and get the motor back to Jotech.

Dont they that soho block out that red Z sitting around?

isayimandrew · 01-20-2022, 09:36 AM

Quote:

Originally Posted by Elmo370z

Dont they that soho block out that red Z sitting around?

Are you talking about CNC Werx? I saw a while back they had a VQ build for soho but no clue for which Z.

Elmo370z · 01-20-2022, 10:18 AM

Quote:

Originally Posted by isayimandrew

Are you talking about CNC Werx? I saw a while back they had a VQ build for soho but no clue for which Z.

Jotec. The motor is from that 900whp sc Z that soho built

isayimandrew · 01-20-2022, 10:37 AM

Quote:

Originally Posted by Elmo370z

Jotec. The motor is from that 900whp sc Z that soho built

Ahh I gotcha. I don't know what Jotech has lying around. I thought I was the only Z at their shop currently but I could be wrong.

FrankEtier · 01-20-2022, 11:37 AM

Quote:

Originally Posted by Elmo370z

Jotec. The motor is from that 900whp sc Z that soho built

That motor is there but I heard one of the Jotech guys purchased it from Ben.

Elmo370z · 01-20-2022, 02:58 PM

Quote:

Originally Posted by FrankEtier

That motor is there but I heard one of the Jotech guys purchased it from Ben.

True. Figure it worth a try. Enough money people will sell anything

isayimandrew · 01-20-2022, 05:22 PM

Quote:

Originally Posted by Elmo370z

True. Figure it worth a try. Enough money people will sell anything

Thanks for the idea. I just want my car back and enjoy it being boosted haha

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z G37 RHD Diy Twin Turbo Build	rovert	Member's 370Z Gallery	8	02-08-2020 04:32 PM
New Twin Turbo build in progress: Another Gamma V3 Twin turbo install	Nyght	Forced Induction	37	08-08-2017 09:27 AM
Twin Turbo Build	LafitteZ	40th Anniversary 370Z	42	10-05-2011 09:58 AM
TITAN's Twin Turbo build Done!!!!!!	kenbains12	Forced Induction	49	06-18-2010 07:32 AM

01-19-2022, 09:39 AM	#1 (permalink)
isayimandrew Enthusiast Member Join Date: Sep 2012 Location: Texas Posts: 321 Drives: 13 370Z Nismo MR M6 Rep Power: 13	Just to give another update: Still waiting on my motor to be done being built before Jotech can do the rest of the build. The original plan back in August was to have a local shop do the motor build and assembly and to send CNC Werx the block to do the Cylinder Support System closed deck modifications. But, the original local shop was not communicating well and had a few other Jotech motors still in queue (including mine) so Jotech decided to get my motor back from them around the middle of October and let CNC Werx do both their closed deck modification as well as all the other machining for the motor build and assembly. After a few delays (thanks Covid), they were able to get the tooling needed for the head stud conversion and to start assembly soon. Now that all the machining is done, they're in the middle of assembly where they've hit a snag on the original head studs we were going to use. They recommended that we go with the ARP 625+ head studs instead so Jotech is currently trying to source those (out of stock; again thanks Covid) so CNC Werx can finish their portion and get the motor back to Jotech.