I'm sorry, I must have missed you explaining it this way. The installer explained the noise differently to me. Is your custom BOV filter similar to the Vibrant crankcase filter? Would that addition (along with the QRJ) to the system be enough to eliminate the flutter, or is the intake tube and pleated filter contributing to the noise suppression? Are you mounting the BOV filter in a remote location? Are the mounting brackets and the intercooler identical to the ones supplied with the ACE kit (therefore the space between the intercooler and the radiator the same)?

Gonna have room for 3 coolers for a 7AT? I see it’s up for preorder on the site now...

Depends how big the coolers are. Any pics? And why 3? 2 oil and 1 trans?

No pics yet, but would be 19 Row for Engine, 19 or 30 Row for AT (I assume I’d need this if installing SC) and whatever size for the ACE. That said, I’m sure a custom bracket wouldn’t be a big deal if I’d be going SC’d. I’ve come to grips that I wouldn’t need my Dewla Air Guide anymore :)

Ran out of time on dyno. We were just making some power.
19psi at 7400rpm with a full filter setup at 1000ft elevation.

Without a filter at sea level revving to 7800, I bet we see 23psi.

Back to the dyno Wednesday.

It's a good thing you're installing a boost controller :rofl2:

Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!!

708whp!
556wtq!
21.5psi!

All at only 7000rpm rev limit!

Stock block!

We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune.

This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard.

This kit will be able to bleed off boost for whatever power you want to make.

Still the most affordable supercharger kit on the market!

Tuned by the best... Eugene Turkov

Get yours here.... www.topgunspeedworks.com

http://www.the370z.com/members/topgu...-154912748.jpg

Great numbers, especially with a filter. Are you going to do a 17 psi dyno run?

How do I order this on website? All I see is the ace kit.

Direct Link: https://www.topgunspeedworks.com/nis...percharger-kit

Damn... looks at that torque line, so much low to mid range power! Lots of fun factor right there without having to go TT's.

Smells like alotta folks are about to go boosted.

Yeeees sir. I’m contemplating this or an FI TT setup only because the wife drives the car and she has never driven a single turbo car, only TT and SC. The more linear power curve will make it a lot easier for her to adapt. Decisions decisions....

Need video clips of this kit! Siiiick.

The best part....we are barely scratching the surface of this kits capability.

I have a video clip on FB.

Got any videos to share with people who aren't on FB or IG?